36L source drawing - text version
Solid wood bathroom vanity technical drawing (36L.pdf) - text companion
PDF with text descriptions — 11 pages
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source warnings and unresolved dimensions in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of the two pages in the source file 36L.pdf. Visible headings do not name a model or an offset designation. The filename is retained solely as the source identifier. All separately printed dimensions and view references are preserved, without engineering approval.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. The source shows unbracketed and bracketed numeric labels without an explicit unit legend. These two sets of labels are reproduced separately; no unit is inferred or conversion performed.
Source limitations
Source identity is 36L.pdf; the visible technical pages contain no model or left-offset title. No model identity is inferred from filename, embedded PDF metadata or associated product title.
The source shows unbracketed and bracketed numeric labels without an explicit unit legend. These two sets of labels are reproduced separately; no unit is inferred or conversion performed.
Nonzero unbracketed values paired with bracketed zero, and the two unpaired 150 labels, are preserved without conversion.
This is a text transcription of source drawings, not a corrected or approved engineering drawing.
36L-P2-CIRCLE-SYMBOL - source page 2
Ambiguous symbol on two circular-feature size labels: [? 2 1/4] / ? 60 (bracketed / unbracketed).
Both rendered source labels visibly begin with question marks. The source does not establish whether this was intended to be a diameter symbol or another notation.
Confirm the intended notation and applicable dimension with Willow Bath and Vanity before drilling or fabrication. The companion retains the original printed labels. No correction has been made.
Source page 1: Top plan, side section and two separate rectangular details
View original PDF — Source page 1: Top plan, side section and two separate rectangular details
Original drawing: Top plan, side section and two separate rectangular details.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The page is headed TECHNICAL DRAWING and Solid Wood Construction Bathroom Vanity, with a WILLOW COLLECTIONS logo. The upper-left plan has a broad left bay and narrow right bay; multiple nested width references, clearances and lower chain dimensions are shown. An upper-right rectangular detail has a stepped upper-left corner.
The lower-left side section shows the top slab, a curved internal bowl profile, three internal drawer-box outlines and legs. The two lower drawer-box heights are each labeled 150 without a bracketed secondary value. A separate lower-right narrow rectangular detail has internal references and small clearances. The source does not separately name the two rectangular components.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Top plan: outside width | 36 | 914 | Outermost upper horizontal span from left outside edge to right outside edge of the drawing. |
| Top plan: second overall width reference | 35 1/4 | 894 | Second upper horizontal span between the cabinet outside side references, inset from the outermost line. |
| Top plan: third width reference | 32 1/2 | 824 | Third upper horizontal span between the next pair of inner side references. |
| Top plan: fourth width reference | 31 1/4 | 794 | Fourth upper horizontal span between the innermost pair of upper width references. |
| Top plan: left partial reference | 12 1/2 | 320 | Short upper horizontal span from the outside left edge to an internal datum not separately named in the source. |
| Top plan: right partial reference | 18 | 457 | Separate upper horizontal span from an internal datum to the outside right edge; the source does not name that datum. |
| Top plan: broad left internal depth | 17 3/4 | 454 | Vertical span inside the broad left bay from upper internal reference to lower internal reference. |
| Top plan: left-side small clearance | 0 | 3 | Short horizontal callout between closely spaced lines at the left side of the broad bay. |
| Top plan: broad left larger width | 21 1/4 | 542 | Upper of the two horizontal spans inside the broad left bay, between its surrounding inner references. |
| Top plan: broad left smaller width | 21 | 536 | Lower horizontal span inside the broad left bay, across the inner rectangular outline. |
| Top plan: right upper internal width | 10 | 256 | Upper horizontal span across the narrow right bay between its inner side references. |
| Top plan: right inset outline width | 9 1/2 | 244 | Horizontal span across the inset rectangular outline in the right bay. |
| Top plan: right lower bay span | 11 | 278 | Lower horizontal span across the narrow right bay, outside the inset outline. |
| Top plan: overall depth | 22 | 560 | Right outer vertical span from the rear outside edge to the front outside edge. |
| Top plan: upper end segment | 2 | 50 | Upper short segment of the right vertical chain. |
| Top plan: central depth segment | 17 3/4 | 450 | Long middle segment of the right vertical chain between the short end segments. |
| Top plan: lower end segment | 2 | 50 | Lower short segment of the right vertical chain above its final small clearance. |
| Top plan: final lower clearance | 1/2 | 10 | Slanted leader identifies the bottommost short depth segment at the lower right. |
| Top plan: bottom chain left end section | 2 | 50 | Left 50 segment of the bottom horizontal chain, next to the left outer clearance. |
| Top plan: bottom chain first front section | 10 1/4 | 262 | First long segment from the left in the bottom horizontal chain. |
| Top plan: bottom chain second front section | 10 1/4 | 262 | Middle long segment in the bottom horizontal chain. |
| Top plan: bottom chain third front section | 10 1/4 | 262 | Rightmost long segment in the bottom horizontal chain. |
| Top plan: bottom chain right end section | 2 | 50 | Right 50 segment of the bottom horizontal chain, beside the right outer clearance. |
| Top plan: bottom chain left outer clearance | 1/2 | 10 | Far-left slanted leader to the small interval outside the left end section. |
| Top plan: bottom chain first inner clearance | 0 | 2 | Slanted leader to the small interval between the left end section and first long section. |
| Top plan: bottom chain second inner clearance | 0 | 2 | Slanted leader to the interval between the first and second long sections. |
| Top plan: bottom chain third inner clearance | 0 | 2 | Slanted leader to the interval between the second and third long sections. |
| Top plan: bottom chain fourth inner clearance | 0 | 2 | Slanted leader to the interval between the third long section and right end section. |
| Top plan: bottom chain right outer clearance | 1/2 | 10 | Far-right slanted leader to the small interval outside the right end section. |
| Upper-right detail: overall width | 21 | 536 | Full width of the separate rectangular outline with a step at its upper left corner. |
| Upper-right detail: upper width after step | 20 1/4 | 514 | Horizontal span from the inset upper-left edge to the right outside edge. |
| Upper-right detail: overall depth | 17 3/4 | 454 | Full vertical span at the right of the separate outline. |
| Upper-right detail: step height | 1 3/4 | 43 | Short vertical depth of the upper-left corner step. |
| Upper-right detail: step width | 3/4 | 22 | Short horizontal width of the upper-left corner step. |
| Side section: top outside depth | 22 | 560 | Full horizontal span across the top slab in the side elevation at lower left. |
| Side section: overall height including top | 35 1/2 | 900 | Outermost left vertical span from the top surface to the floor reference. |
| Side section: height below top | 33 1/2 | 850 | Next left vertical span from underside of the top to the floor reference. |
| Side section: upper rail segment | 2 | 50 | Upper short segment of the left internal vertical chain, directly below the top. |
| Side section: first front-height segment | 7 3/4 | 200 | First of three long front-height segments down the left chain. |
| Side section: second front-height segment | 7 3/4 | 200 | Middle long front-height segment of the left chain. |
| Side section: third front-height segment | 7 3/4 | 200 | Lowest long front-height segment of the left chain. |
| Side section: lower rail segment | 2 | 50 | Short lower rail segment beneath the third front-height segment. |
| Side section: foot-height reference | 5 1/2 | 140 | Bottom segment of the left chain from the lower rail underside to the floor reference. |
| Side section: first clearance | 0 | 2,5 | Small clearance below the upper rail before the first long front-height segment. |
| Side section: second clearance | 0 | 2,5 | Small clearance between the first and second long front-height segments. |
| Side section: third clearance | 0 | 2,5 | Small clearance between the second and third long front-height segments. |
| Side section: fourth clearance | 0 | 2,5 | Small clearance below the third long front-height segment and above the lower rail. |
| Side section: upper internal box height | 3 3/4 | 96 | Vertical dimension inside the upper internal drawer-box outline. |
| Side section: middle internal box height | Not printed separately | 150 | Large vertical 150 label inside the middle internal drawer-box outline; no bracketed secondary label is printed for this callout. |
| Side section: lower internal box height | Not printed separately | 150 | Large vertical 150 label inside the lower internal drawer-box outline; no bracketed secondary label is printed for this callout. |
| Side section: middle horizontal internal span | 17 3/4 | 454 | Horizontal dimension from an internal left reference through the middle box area to the rear inside reference; it extends beyond the drawn box end. |
| Side section: upper rear segment | 6 | 150 | Upper right vertical span from underside of the top to the upper edge of the rear opening references. |
| Side section: larger rear opening height reference | 17 1/4 | 440 | Left member of the paired right-side vertical dimensions, spanning the larger opening reference. |
| Side section: smaller rear opening height reference | 17 1/4 | 437 | Right member of the paired right-side vertical dimensions, ending slightly above the larger reference's lower endpoint. |
| Side section: lower rear segment | 4 | 100 | Short lower right vertical span from the larger rear opening's lower reference to the lower structural reference. |
| Side section: lower front thickness reference | 1 | 28 | Short horizontal dimension at the lower left frame/rail intersection. |
| Side section: upper lower-frame horizontal span | 21 | 532 | Upper of the two repeated 532 horizontal dimensions below the drawers, between the front inner reference and rear outside reference. |
| Side section: lower lower-frame horizontal span | 21 | 532 | Lower repeated 532 horizontal dimension at leg level, with the same left and right reference directions. |
| Side section: lower reference height above floor | 6 3/4 | 172 | Vertical span near the rear leg from the lower horizontal frame reference to the floor. |
| Side section: front foot width | 1 1/4 | 30 | Short horizontal span below the front foot at the left. |
| Side section: lower outside depth | 21 3/4 | 550 | Full lower horizontal span from the front outside reference to the rear outside reference. |
| Lower-right detail: outer width | 9 1/2 | 244 | Full horizontal width above the separate narrow rectangular detail. |
| Lower-right detail: internal width | 8 3/4 | 222 | Bottom horizontal span between the inset side references. |
| Lower-right detail: internal vertical span | 9 3/4 | 245 | Vertical span between the inside upper and lower horizontal references. |
| Lower-right detail: upper clearance | 1/4 | 5 | Short vertical span from outer upper edge to inset upper reference. |
| Lower-right detail: right clearance | 1/4 | 5 | Short horizontal span from inset right reference to outer right edge. |
| Lower-right detail: lower clearance | 0 | 3 | Short vertical span between the inset lower reference and its adjacent lower line. |
Source note: The source prints a primary numeric label and a bracketed second value. Both are transcribed as printed into the unbracketed and bracketed columns, including decimal commas and bracketed zeros. No value is recalculated or selected as controlling.
Source note: No named model, sink-offset designation or source tolerance appears in the visible page headings. The filename 36L.pdf alone does not establish any of these.
Source note: Several nonzero primary dimensions are paired with [0]: 2, 2,5 and 3. These bracketed zeros are retained literally. The labels 450 and 454 are both paired with [17 3/4], and 437 and 440 are both paired with [17 1/4]; they remain separate source dimensions.
Source page 2: Front elevation, rear elevation and separate rear-panel detail
View original PDF — Source page 2: Front elevation, rear elevation and separate rear-panel detail
Original drawing: Front elevation, rear elevation and separate rear-panel detail.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The front elevation at the top shows a broad left front with two round knobs and vertical lines, a narrow right column with three round knobs and horizontal divisions, a top slab and legs. The view below at the left shows a rear panel with a rounded rectangular opening toward the left and a separate circular feature toward the lower right.
The lower-right detail repeats the rear panel separately, with its own outside dimensions and opening positions. The large rear-elevation and separate-panel dimensions remain distinct. Both circular features carry the visible ambiguous labels ? 60 and [? 2 1/4]; they are reproduced literally rather than interpreted as diameter notation.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Front elevation: top outside width | 36 | 914 | Full horizontal span across the slab at the top of the front elevation. |
| Front elevation: upper partial reference | 12 1/2 | 320 | Upper horizontal span from the outside left slab edge to an internal datum not separately named. |
| Front elevation: total height | 35 1/2 | 900 | Outer right vertical span from the top surface to the floor reference. |
| Front elevation: top slab height | 2 | 50 | Highest short segment of the right vertical chain, across the slab thickness. |
| Front elevation: upper rail height | 2 | 50 | Second short segment of the right chain, immediately below the top slab. |
| Front elevation: front-panel region height | 24 | 610 | Long right vertical segment across the main door and drawer-front region. |
| Front elevation: lower rail height | 2 | 50 | Short segment of the right chain below the main front-panel region. |
| Front elevation: lower leg reference height | 5 1/2 | 140 | Bottom segment of the right chain from the lower rail underside to the floor. |
| Front elevation: inner lower reference width | 33 | 838 | Upper of the lower horizontal dimensions, between the inner lower-frame references. |
| Front elevation: broad left front width | 20 3/4 | 526 | Lower horizontal span across the broad left front region. |
| Front elevation: narrow right front width | 10 1/4 | 262 | Lower horizontal span across the right drawer-front column. |
| Front elevation: lower left clearance | 0 | 2 | Slanted leader to the small gap at the left of the lower front-region width chain. |
| Front elevation: lower middle clearance | 0 | 2 | Slanted leader to the small gap between broad left and narrow right front regions. |
| Front elevation: lower right clearance | 0 | 2 | Slanted leader to the small gap at the right of the lower front-region width chain. |
| Front elevation: cabinet outside width | 35 1/4 | 894 | Lowest horizontal overall span across the cabinet outside references. |
| Rear elevation: cabinet width | 35 1/4 | 894 | Full horizontal span above the rear elevation. |
| Rear elevation: left edge to rectangular opening | 8 | 201 | Left segment of the upper chain from cabinet outside left edge to opening left edge. |
| Rear elevation: rectangular opening width | 13 3/4 | 350 | Middle segment of the upper chain across the rounded rectangular opening. |
| Rear elevation: opening to right edge | 13 1/2 | 343 | Right segment of the upper chain from opening right edge to outside right edge. |
| Rear elevation: cabinet top to opening | 7 1/4 | 185 | Upper right vertical segment from cabinet top to opening top. |
| Rear elevation: rectangular opening height | 10 3/4 | 270 | Middle right vertical segment across the rectangular opening. |
| Rear elevation: opening bottom to floor | 15 1/2 | 395 | Lower right vertical segment from opening bottom to floor reference. |
| Rear elevation: circular-feature center to right edge | 7 | 178 | Horizontal span from the circular feature centerline to the cabinet outside right edge. |
| Rear elevation: circular-feature center to panel bottom | 2 1/2 | 63 | Vertical dimension from the circular feature centerline to the lower edge of the overlaid rear panel. |
| Rear elevation: circular-feature center above floor | 13 1/4 | 337 | Long lower vertical span from the circular feature centerline to the floor reference. |
| Rear elevation: lower rail reference above floor | 6 3/4 | 172 | Shorter lower vertical span from underside of the lower rail to the floor reference. |
| Rear elevation: rounded opening corner radius | R1 | R25 | Radius leader points to the rounded lower-left corner of the rectangular opening. |
| Rear elevation: circular-feature ambiguous size label | ? 2 1/4 | ? 60 | A slanted dimension line through the circular feature carries literal question-mark-prefixed labels; no replacement diameter symbol is inferred.Unresolved: 36L-P2-CIRCLE-SYMBOL |
| Separate rear panel: overall width | 32 1/4 | 822 | Full horizontal span above the rectangular panel detail at lower right. |
| Separate rear panel: left edge to opening | 6 1/2 | 164 | Left segment of the upper horizontal chain to opening left edge. |
| Separate rear panel: opening width | 13 3/4 | 350 | Middle segment of the upper chain across the rounded rectangular opening. |
| Separate rear panel: opening to right edge | 12 1/4 | 308 | Right segment of the upper chain from opening right edge to panel right edge. |
| Separate rear panel: overall height | 17 1/4 | 438 | Full outer vertical span at the right of the panel detail. |
| Separate rear panel: top edge to opening | 2 | 49 | Short upper right vertical segment from panel top to opening top. |
| Separate rear panel: opening height | 10 3/4 | 270 | Right vertical segment across the rounded rectangular opening. |
| Separate rear panel: circular-feature center above bottom | 2 1/2 | 63 | Short lower right vertical dimension from circular-feature centerline to panel bottom. |
| Separate rear panel: circular-feature center to right edge | 5 1/2 | 141 | Lower horizontal dimension from circular-feature centerline to panel right edge. |
| Separate rear panel: opening corner radius | R1 | R25 | Radius leader at the rounded lower-left corner of the rectangular opening. |
| Separate rear panel: circular-feature ambiguous size label | ? 2 1/4 | ? 60 | A slanted dimension line through the circular feature carries the literal question-mark-prefixed values; its symbol is not silently changed.Unresolved: 36L-P2-CIRCLE-SYMBOL |
Source note: The source prints a primary numeric label and a bracketed second value. Both are transcribed as printed into the unbracketed and bracketed columns, including decimal commas and bracketed zeros. No value is recalculated or selected as controlling.
Source note: No named model, sink-offset designation or source tolerance appears in the visible page headings. The filename 36L.pdf alone does not establish any of these.
Source note: The source labels the opening corner radii R25 and [R1] in both rear views. It gives no separate controlling-unit declaration.
Source note: The ambiguous question-mark symbol on both circular-feature labels needs clarification before it is used for drilling or other fabrication.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.