30-Inch Bathroom Vanities

A 30-inch bathroom vanity can add counter and storage space without requiring a long wall. The current collection contains single-sink models in floating and freestanding designs, making this width useful for many powder rooms, guest baths and smaller everyday bathrooms.

What changes at 30 inches?

Compared with a 24-inch cabinet, the added width can create more room beside the basin or support a different door-and-drawer layout. The benefit depends on the selected model’s internal design, not width alone. If circulation is tight, compare 24-inch bathroom vanities. If the room can accept a larger footprint, compare the 36-inch collection.

Plan the basin and plumbing rough-in

Confirm the basin and countertop cutout location on the selected product drawing, then compare it with the drain and supply lines. Do not assume every 30-inch cabinet has the same internal plumbing clearance. Check how the trap meets the drawers or doors and leave service access for installation and maintenance.

Protect the walkway

Cabinet depth, countertop overhang and hardware projection can affect movement more than a small change in width. Tape the listed cabinet and top footprint on the floor, open every nearby door and check the standing area in front of the sink. Measure at finished-wall height so trim and baseboards are included.

Compare floating and freestanding models

A floating 30-inch vanity keeps the floor visible and requires suitable wall support, model-appropriate fasteners and coordinated plumbing. A freestanding model has a grounded profile but still requires the clearances and attachment specified by the manufacturer. Use the selected product’s installation drawing before work begins.

Review material, storage and included pieces

Current public filters include birch, mango, mindi, teak and white oak, with storage ranging from door-based/no-drawer layouts to one- through four-drawer designs. Material, finish, joinery and usable storage vary by model. Countertop, basin, backsplash and hardware inclusions also depend on the selected variant. Confirm each item in the option selector and order summary, and use the countertop guide for surface comparisons.

Before ordering

• Measure the finished wall, cabinet depth and countertop footprint.
• Mark the drain, water lines, outlets and switches.
• Check entry, shower, cabinet and drawer clearances.
• Confirm usable storage around the plumbing.
• Verify the selected finish, top and included components.
• Measure the delivery route into the bathroom.

For room-first browsing, see the broader powder-room vanity collection.

Frequently asked questions

How much finished wall space should I allow for a 30-inch vanity?

Use the selected model’s cabinet and countertop dimensions rather than allowing exactly 30 inches. Include countertop overhang, trim, wall conditions and installation tolerance, then confirm door and drawer clearance.

How do I coordinate a 30-inch vanity with the plumbing rough-in?

Compare the selected product drawing with the drain and supply-line locations. Confirm the basin or countertop cutout, internal cabinet clearance and space around the trap before plumbing or cabinetry work is finalized.

What storage layouts are available in the current 30-inch collection?

Current public filters include door-based/no-drawer models and designs with one through four drawers. Usable depth and plumbing notches vary, so review the exact interior layout for the selected model.

Which countertop, sink and hardware come with a 30-inch vanity?

Included components vary by product and selected variant. Check the option selector and order summary for the cabinet, countertop, basin, backsplash, faucet drilling, hardware and any cabinet-only configuration.