36R.pdf — drawing text version
Solid wood bathroom vanity technical drawing (36R.pdf) - text companion
PDF with text descriptions — 11 pages
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source warnings and unresolved dimensions in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of the two pages in source file 36R.pdf. The visible technical pages do not name a model or an offset designation. The filename is retained solely as the source identifier. All separately printed dimensions and view references are preserved, without engineering approval.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. The source shows unbracketed and bracketed numeric labels without an explicit unit legend. These two sets of labels are reproduced separately; no unit is inferred or conversion performed.
Source limitations
Source identity is 36R.pdf; visible technical pages contain no model or right-offset title. No model identity is inferred from the filename, embedded PDF metadata or associated product title.
The source shows unbracketed and bracketed numeric labels without an explicit unit legend. These two sets of labels are reproduced separately; no unit is inferred or conversion performed.
Nonzero unbracketed values paired with bracketed zero, the two unpaired 150 labels, the comma in 2,5, and the overlapping but separate 437 and 440 rear references are retained.
This is a text transcription of source drawings, not a corrected or approved engineering drawing.
36R-P2-CIRCLE-SYMBOL - source page 2
Ambiguous symbol on two circular-feature size labels: [? 2 1/4] / ? 60 (bracketed / unbracketed).
Both rendered source labels visibly begin with question marks. The source does not establish whether this was intended to be a diameter symbol or another notation.
Confirm the intended notation and applicable dimension with Willow Bath and Vanity before drilling or fabrication. The companion retains the original printed labels. No correction has been made.
Source page 1: Top plan, side section and two separate rectangular details
View original PDF — Source page 1: Top plan, side section and two separate rectangular details
Original drawing: Top plan, side section and two separate rectangular details.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The page is headed TECHNICAL DRAWING and Solid Wood Construction Bathroom Vanity, with a WILLOW COLLECTIONS logo. The upper-left plan has a narrow left bay and broad right bay. It includes nested overall width references, three long internal horizontal spans across both bays, the smaller left rectangles, and a lower chain of three equal spans with separate gaps.
The upper-right separate broad rectangular detail has a stepped upper-right corner. The lower-right narrow rectangular detail includes a central vertical member, two narrow horizontal cross-members and clearance dimensions. These components are not separately named in the source.
The lower-left side section shows the top slab, a curved internal bowl profile, three internal drawer-box outlines and legs. The two lower drawer-box heights are each labeled 150 without bracketed secondary values. Separate rear vertical references 437 and 440 have overlapping printed labels and are preserved separately.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Top plan: outside width | 36 | 914 | Outermost upper horizontal span from the left outside edge to the right outside edge. |
| Top plan: second overall width reference | 35 1/4 | 894 | Second upper horizontal span, between the side references inset from the outermost edges. |
| Top plan: third width reference | 32 1/2 | 824 | Third upper horizontal span, between the next inner pair of side references. |
| Top plan: fourth width reference | 31 1/4 | 794 | Fourth upper horizontal span, between the innermost pair of upper side references. |
| Top plan: left partial reference | 18 | 457 | Short upper horizontal span from the outside left edge to an internal datum that is not separately named. |
| Top plan: right partial reference | 12 1/2 | 320 | Separate upper horizontal span from an unnamed internal datum to the outside right edge. |
| Top plan: narrow left upper width | 10 | 256 | Upper horizontal reference across the narrow left bay, between its surrounding side references. |
| Top plan: narrow left inset width | 9 1/2 | 244 | Horizontal reference across the inset rectangular outline in the left bay. |
| Top plan: narrow left innermost width | 8 3/4 | 222 | Short horizontal reference across the innermost left rectangle, within the larger 244 outline. |
| Top plan: narrow left lower width | 10 | 256 | Lower horizontal reference across the narrow left bay, separately printed from its upper 256 reference. |
| Top plan: upper long internal span | 33 | 838 | Upper long horizontal dimension between inner left and right side references; it passes across both bays. |
| Top plan: middle long internal span | 33 3/4 | 858 | Middle long horizontal dimension between a wider pair of inner left and right references, across both bays. |
| Top plan: broad right inner width | 21 | 536 | Horizontal span from the inside partition reference to the inner right-side reference in the broad right bay. |
| Top plan: lower long internal span | 33 | 838 | Lower long horizontal dimension between inner left and right side references, separately printed from the upper 838 span. |
| Top plan: broad right internal depth | 17 3/4 | 454 | Vertical span inside the broad right bay between its upper and lower inner references. |
| Top plan: right-side clearance | 0 | 3 | Short horizontal callout between closely spaced lines at the right side of the broad bay. |
| Top plan: overall depth | 22 | 560 | Outermost left vertical span from the rear outside edge to the front outside edge. |
| Top plan: upper depth-chain segment | 2 | 50 | Upper short segment of the left vertical chain. |
| Top plan: middle depth-chain segment | 17 3/4 | 450 | Long middle segment of the left vertical chain. |
| Top plan: lower depth-chain segment | 2 | 50 | Lower short segment of the left vertical chain, before the final small offset. |
| Top plan: final lower depth offset | 1/2 | 10 | Short offset at the bottom of the left vertical chain, below the lower 50 segment. |
| Top plan lower chain: outside left offset | 1/2 | 10 | Leftmost small horizontal offset, called out below the lower chain. |
| Top plan lower chain: left end member | 2 | 50 | Left end member in the lower horizontal chain, before the first narrow gap. |
| Top plan lower chain: first gap | 0 | 2 | Narrow gap after the left end member and before the first 262 span. |
| Top plan lower chain: first panel span | 10 1/4 | 262 | First of the three separately printed equal spans, counted from the left. |
| Top plan lower chain: second gap | 0 | 2 | Narrow gap between the first and second 262 spans. |
| Top plan lower chain: second panel span | 10 1/4 | 262 | Middle of the three separately printed equal spans. |
| Top plan lower chain: third gap | 0 | 2 | Narrow gap between the second and third 262 spans. |
| Top plan lower chain: third panel span | 10 1/4 | 262 | Rightmost of the three separately printed equal spans. |
| Top plan lower chain: fourth gap | 0 | 2 | Narrow gap after the third 262 span and before the right end member. |
| Top plan lower chain: right end member | 2 | 50 | Right end member in the lower horizontal chain. |
| Top plan lower chain: outside right offset | 1/2 | 10 | Rightmost small horizontal offset, called out below the lower chain. |
| Upper-right stepped detail: overall width | 21 | 536 | Full horizontal span of the separate broad rectangular detail. |
| Upper-right stepped detail: width to the step | 20 1/4 | 514 | Horizontal span from the left outside edge to the inset edge of the upper-right step. |
| Upper-right stepped detail: overall height | 17 3/4 | 454 | Full vertical span along the left side of this detail. |
| Upper-right stepped detail: step height | 1 3/4 | 43 | Vertical size of the step at the upper-right corner. |
| Upper-right stepped detail: step width | 3/4 | 22 | Horizontal size of the step at the upper-right corner. |
| Lower-right narrow detail: overall width | 9 1/2 | 244 | Full horizontal span across the separate narrow rectangular detail. |
| Lower-right narrow detail: overall height | 15 1/4 | 390 | Full vertical span along the right side of this detail. |
| Lower-right narrow detail: internal width | 8 3/4 | 222 | Lower horizontal reference between the internal left and right edge lines. |
| Lower-right narrow detail: internal vertical reference | 9 3/4 | 245 | Vertical reference from the upper internal line to the lower cross-member reference. |
| Lower-right narrow detail: upper clearance | 1/4 | 5 | Short vertical clearance between the top outer and inner lines. |
| Lower-right narrow detail: right clearance | 1/4 | 5 | Short horizontal clearance between the right inner and outer lines. |
| Lower-right narrow detail: lower cross-member thickness | 0 | 3 | Short vertical callout across the lower narrow horizontal member. |
| Side section: overall top depth | 22 | 560 | Upper horizontal span from the front edge to the rear edge of the top assembly. |
| Side section: overall height | 35 1/2 | 900 | Outermost left vertical span from the floor reference to the top surface. |
| Side section: height to underside of top | 33 1/2 | 850 | Second left vertical span from the floor reference to the underside of the top. |
| Side section: upper rail height | 2 | 50 | Top short segment in the front vertical chain, below the underside of the top. |
| Side section: upper front gap | 0 | 2,5 | Small gap at the upper front, between the upper rail and the first 200 front segment. |
| Side section: upper front segment | 7 3/4 | 200 | Upper of the three separately printed front vertical segments. |
| Side section: upper-to-middle gap | 0 | 2,5 | Small front gap between the first and second 200 segments. |
| Side section: middle front segment | 7 3/4 | 200 | Middle of the three separately printed front vertical segments. |
| Side section: middle-to-lower gap | 0 | 2,5 | Small front gap between the second and third 200 segments. |
| Side section: lower front segment | 7 3/4 | 200 | Lower of the three separately printed front vertical segments. |
| Side section: lower front gap | 0 | 2,5 | Small front gap after the lower 200 segment and before the base rail. |
| Side section: base rail height | 2 | 50 | Lower short segment of the front vertical chain, above the floor-clearance reference. |
| Side section: floor to base-rail underside | 5 1/2 | 140 | Lowest front-chain segment from the floor reference to the underside of the base rail. |
| Side section: curved bowl-profile vertical reference | 2 1/4 | 60 | Vertical dimension from the upper internal reference down to the lower curved bowl-profile reference. |
| Side section: upper drawer-box height | 3 3/4 | 96 | Vertical span beside the upper internal drawer-box outline. |
| Side section: middle drawer-box height | 150 | Vertical span inside the middle drawer-box outline. No bracketed secondary value is printed. | |
| Side section: lower drawer-box height | 150 | Vertical span inside the lower drawer-box outline. No bracketed secondary value is printed. | |
| Side section: inner horizontal span | 17 3/4 | 454 | Horizontal span across the middle of the side section, from a front internal reference to the rear internal reference. |
| Side section: upper rear-chain segment | 6 | 150 | Upper vertical segment at the rear of the side section, from the underside of the top to the upper central reference. |
| Side section: central rear-chain segment | 17 1/4 | 437 | Central segment of the outer rear vertical chain, between its upper 150 and lower 100 segments. This source label overlaps the adjacent 440 label. |
| Side section: separate rear central span | 17 1/4 | 440 | Separate vertical span just left of the outer rear chain, with its own upper and lower endpoints. It is not merged with the 437 reference. |
| Side section: lower rear-chain segment | 4 | 100 | Lower vertical segment in the rear chain, below the central 437 segment. |
| Side section: upper of two base width references | 21 | 532 | Separately printed upper horizontal width reference near the base, extending from a front inner datum to the rear edge. |
| Side section: lower of two base width references | 21 | 532 | Separately printed lower horizontal width reference near the base; preserved independently of the adjacent 532 label. |
| Side section: front base detail width | 1 | 28 | Small horizontal callout at the front edge of the base, beneath the front vertical chain. |
| Side section: floor to upper base reference | 6 3/4 | 172 | Vertical span from the floor reference to the upper base reference beside the rear leg. |
| Side section: lower front offset | 1 1/4 | 30 | Short horizontal offset at the front of the lowest width reference. |
| Side section: lower overall depth reference | 21 3/4 | 550 | Lowest long horizontal span between the front and rear lower side references. |
Source note: The source shows unbracketed and bracketed numeric labels without an explicit unit legend. These two sets of labels are reproduced separately; no unit is inferred or conversion performed.
Source note: Repeated values are distinct callouts with different endpoints; the two 838 plan spans, two 532 side spans, and three 262 plan segments are retained separately.
Source note: A bracketed zero alongside 2, 2,5 or 3 is reproduced literally and is not replaced by a converted number.
Source note: The original side-section 437 and 440 callouts overlap in print; both bracketed labels read 17 1/4. These are separate references, not interchangeable corrected values.
Source page 2: Front elevation, rear elevation and separate rear panel
View original PDF — Source page 2: Front elevation, rear elevation and separate rear panel
Original drawing: Front elevation, rear elevation and separate rear panel.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The front elevation occupies the upper portion. Three stacked drawer fronts are drawn on the left; two taller door fronts occupy the broad right portion. The drawing includes the top, vertical panel detailing, circular handle features, a base rail, two side legs and horizontal dimension chains.
The lower-left rear elevation has two side legs and a large rear panel with a rounded rectangular opening toward the right and a smaller circular feature near its lower-left area. The lower-right panel detail separately shows both features, with its own overall width, height and locating dimensions.
Both circular-feature size callouts visibly use a question mark before each of the two numeric labels. The notation is preserved exactly and is not interpreted as a diameter symbol.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Front elevation: overall top width | 36 | 914 | Upper horizontal span across the complete top assembly. |
| Front elevation: right partial reference | 12 1/2 | 320 | Separate upper horizontal span from an unnamed internal datum to the right outside edge. |
| Front elevation: overall height | 35 1/2 | 900 | Outermost left vertical span from the floor reference to the top surface. |
| Front elevation: top thickness reference | 2 | 50 | Upper short segment of the left vertical chain across the top assembly. |
| Front elevation: upper rail reference | 2 | 50 | Second short segment of the left vertical chain, immediately below the top assembly. |
| Front elevation: central face height | 24 | 610 | Long middle segment of the left vertical chain, spanning the central front faces. |
| Front elevation: base rail reference | 2 | 50 | Short lower segment of the left vertical chain, below the central faces. |
| Front elevation: floor-clearance reference | 5 1/2 | 140 | Lowest segment of the left vertical chain, from the floor reference to the base-rail underside. |
| Front elevation: lower overall width | 35 1/4 | 894 | Lowest horizontal overall span between the outside lower side references. |
| Front elevation lower chain: first panel width | 10 1/4 | 262 | Leftmost of three separately printed equal widths. |
| Front elevation lower chain: second panel width | 10 1/4 | 262 | Middle of three separately printed equal widths. |
| Front elevation lower chain: third panel width | 10 1/4 | 262 | Rightmost of three separately printed equal widths. |
| Front elevation lower chain: first gap | 0 | 2 | Narrow gap before the first 262 width, at the left edge of the front faces. |
| Front elevation lower chain: second gap | 0 | 2 | Narrow gap between the first and second 262 widths. |
| Front elevation lower chain: third gap | 0 | 2 | Narrow gap between the second and third 262 widths. |
| Front elevation lower chain: fourth gap | 0 | 2 | Narrow gap after the third 262 width, at the right edge of the front faces. |
| Rear elevation: overall width | 35 1/4 | 894 | Upper overall horizontal span between the outer side references. |
| Rear elevation: left edge to large opening | 13 1/2 | 343 | Left segment of the upper horizontal chain, from the outside left reference to the large opening left edge. |
| Rear elevation: large opening width | 13 3/4 | 350 | Middle segment of the upper chain, between the left and right edges of the large rounded rectangular opening. |
| Rear elevation: large opening to right edge | 8 | 201 | Right segment of the upper chain, from the large opening right edge to the outside right reference. |
| Rear elevation: top to large opening | 7 1/4 | 185 | Upper left vertical segment from the top rear reference to the large opening upper edge. |
| Rear elevation: large opening height | 10 3/4 | 270 | Middle left vertical segment between the upper and lower edges of the large opening. |
| Rear elevation: large opening lower edge to floor | 15 1/2 | 395 | Lower left vertical segment from the large opening lower edge to the floor reference. |
| Rear elevation: circular feature horizontal location | 7 | 178 | Horizontal reference from the outside left edge to the center reference of the smaller circular feature. |
| Rear elevation: floor to lower rail underside | 6 3/4 | 172 | Short lower vertical reference from the floor to the underside of the lower rail. |
| Rear elevation: circular feature to panel bottom | 2 1/2 | 63 | Short vertical reference between the circular-feature center reference and the bottom edge of the rear rectangular panel. |
| Rear elevation: circular feature height from floor | 13 1/4 | 337 | Vertical reference from the floor to the circular-feature center reference. |
| Rear elevation: circular feature size label | ? 2 1/4 | ? 60 | Slanted dimension line across the smaller circular feature. Both leading question marks are reproduced literally; no diameter meaning is inferred.Unresolved: 36R-P2-CIRCLE-SYMBOL |
| Rear elevation: large opening corner radius | R1 | R25 | Leader to the lower-right rounded corner of the large opening. |
| Separate rear panel: overall width | 32 1/4 | 822 | Upper full horizontal span across the separate rectangular panel detail. |
| Separate rear panel: left edge to large opening | 12 1/4 | 308 | Left segment of the upper horizontal chain, from the panel left edge to the large opening left edge. |
| Separate rear panel: large opening width | 13 3/4 | 350 | Middle segment of the upper chain, between the large opening left and right edges. |
| Separate rear panel: large opening to right edge | 6 1/2 | 164 | Right segment of the upper chain, from the large opening right edge to the panel right edge. |
| Separate rear panel: overall height | 17 1/4 | 438 | Outermost left vertical span across the full panel height. |
| Separate rear panel: top to large opening | 2 | 49 | Short upper left vertical reference from the panel top edge to the large opening upper edge. |
| Separate rear panel: large opening height | 10 3/4 | 270 | Vertical reference between the upper and lower edges of the large opening. |
| Separate rear panel: circular feature to bottom | 2 1/2 | 63 | Short lower left vertical reference from the circular-feature center reference to the panel bottom edge. |
| Separate rear panel: circular feature horizontal location | 5 1/2 | 141 | Lower horizontal reference from the panel left edge to the circular-feature center reference. |
| Separate rear panel: circular feature size label | ? 2 1/4 | ? 60 | Slanted dimension line across the smaller circular feature. Both leading question marks are reproduced literally; no diameter meaning is inferred.Unresolved: 36R-P2-CIRCLE-SYMBOL |
| Separate rear panel: large opening corner radius | R1 | R25 | Leader to the lower-right rounded corner of the large opening. |
Source note: The source shows unbracketed and bracketed numeric labels without an explicit unit legend. These two sets of labels are reproduced separately; no unit is inferred or conversion performed.
Source note: The 320 reference is printed above the right side of the front elevation; its internal datum is not named. It is not used to infer a model or sink-offset designation.
Source note: The circular-feature size notation [? 2 1/4] / ? 60 needs confirmation before drilling or fabrication.
Source note: The rear elevation and separate panel use different horizontal locating references (178 and 141); both are preserved with their own view endpoints.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.