42.pdf — drawing text version
Solid wood bathroom vanity technical drawing (42.pdf) - text companion
PDF with text descriptions — 12 pages
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of the two source pages in 42.pdf. The visible pages contain no model or finish name. The filename identifies the source only; dimensions remain as printed, without engineering approval.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.
Source limitations
The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.
Source identity is 42.pdf; visible technical pages do not establish a model, current material, finish, included accessory set, tolerance or controlling unit.
Printed zero values, comma decimals and repeated labels with distinct reference points are retained. This transcription does not correct or approve source engineering dimensions.
Source page 1: Top plan, side section, notched detail and narrow rectangular detail
Original drawing: Top plan, side section, notched detail and narrow rectangular detail.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The sheet is headed TECHNICAL DRAWING, carries the WILLOW COLLECTIONS logo and the footer Solid Wood Construction Bathroom Vanity. The upper-left plan has a broad central region between two narrow side regions; a central open-topped notch has a rounded bottom. Nested width spans, three long across-plan internal spans, the left inset rectangles and a four-panel lower chain are separately dimensioned. A small undimensioned circular feature appears above the central notch.
The separate upper-right rectangular detail has an open-topped central notch with a rounded bottom. Both shoulder widths, notch width and depth, and overall width and height are shown. The source does not label its component name.
The lower-right narrow rectangular detail contains a vertical central member and two thin horizontal cross-members. The lower-left side section shows a top slab, three internal drawer-box outlines and legs. Each of the three drawer-box heights has its own 150 [6] label. Separate rear vertical references 440 and 437 remain distinct.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Top plan: outside width | 42 | 1066 | One of the nested upper horizontal spans between the corresponding left and right side reference lines, retained separately from the other spans. |
| Top plan: second overall width reference | 41 1/4 | 1046 | One of the nested upper horizontal spans between the corresponding left and right side reference lines, retained separately from the other spans. |
| Top plan: third width reference | 38 1/2 | 976 | One of the nested upper horizontal spans between the corresponding left and right side reference lines, retained separately from the other spans. |
| Top plan: fourth width reference | 37 1/4 | 946 | One of the nested upper horizontal spans between the corresponding left and right side reference lines, retained separately from the other spans. |
| Top plan: left-to-center partial reference | 21 | 533 | Upper partial horizontal span from the outside left edge to the internal reference near the plan center. The datum is not named. |
| Top plan: left partial reference | 10 1/4 | 259 | Separate upper partial span between a left-side reference and the first internal partition reference. |
| Top plan: central upper reference | 18 1/2 | 472 | Upper horizontal span between the shown inner partition references, across the central region. |
| Top plan: upper narrow-left span | 9 | 228 | Upper horizontal reference across the narrow left bay. |
| Top plan: left inset rectangular width | 8 1/2 | 216 | Span across the inset rectangular outline in the left bay. |
| Top plan: left innermost width | 7 3/4 | 194 | Short lower span between the innermost left rectangular references. |
| Top plan: lower narrow-left span | 9 | 228 | Separately printed lower width across the left bay. |
| Top plan: upper long internal reference | 39 3/4 | 1010 | Upper long horizontal reference extending across the plan between inner side references. |
| Top plan: middle long internal reference | 39 | 990 | Middle long horizontal reference extending across the plan between its own inner side references. |
| Top plan: central inner width | 17 3/4 | 448 | Horizontal span between the left and right inner edges of the central rectangular region. |
| Top plan: lower long internal reference | 37 1/4 | 946 | Lower long horizontal reference extending across the plan, separate from the upper 946 span. |
| Top plan: central lower reference | 17 3/4 | 454 | Lower horizontal span between the outside reference lines of the central rectangular region. |
| Top plan: central internal depth | 17 3/4 | 454 | Vertical span inside the central region between the shown upper and lower references. |
| Top plan: central notch width | 5 | 130 | Horizontal span between the two vertical sides of the rounded-bottom notch in the central region. |
| Top plan: overall depth | 22 | 560 | Outermost left vertical span across the plan. |
| Top plan: upper depth-chain segment | 2 | 50 | Upper short segment of the left depth chain. |
| Top plan: middle depth-chain segment | 17 3/4 | 450 | Long middle segment of the left depth chain. |
| Top plan: lower depth-chain segment | 2 | 50 | Lower short segment of the left depth chain. |
| Top plan: final lower depth offset | 1/2 | 10 | Small offset below the lower depth-chain segment. |
| Top plan lower chain: outside left offset | 1/2 | 10 | Small offset at the outside left end of the lower horizontal chain. |
| Top plan lower chain: left end member | 2 | 50 | Left end member before the first gap. |
| Top plan lower chain: gap 1 | 0 | 2 | Narrow gap immediately before panel span 1, counted from the left. |
| Top plan lower chain: panel span 1 | 9 1/4 | 234 | Separately printed panel span 1 of four, counted from the left. |
| Top plan lower chain: gap 2 | 0 | 2 | Narrow gap immediately before panel span 2, counted from the left. |
| Top plan lower chain: panel span 2 | 9 1/4 | 234 | Separately printed panel span 2 of four, counted from the left. |
| Top plan lower chain: gap 3 | 0 | 2 | Narrow gap immediately before panel span 3, counted from the left. |
| Top plan lower chain: panel span 3 | 9 1/4 | 234 | Separately printed panel span 3 of four, counted from the left. |
| Top plan lower chain: gap 4 | 0 | 2 | Narrow gap immediately before panel span 4, counted from the left. |
| Top plan lower chain: panel span 4 | 9 1/4 | 234 | Separately printed panel span 4 of four, counted from the left. |
| Top plan lower chain: gap 5 | 0 | 2 | Narrow gap after the fourth panel span and before the right end member. |
| Top plan lower chain: right end member | 2 | 50 | Right end member after the final gap. |
| Top plan lower chain: outside right offset | 1/2 | 10 | Small offset at the outside right end of the lower horizontal chain. |
| Upper-right notched detail: overall width | 17 3/4 | 448 | Full width across the separate upper-right rectangular detail. |
| Upper-right notched detail: overall height | 17 3/4 | 454 | Full height at the right side of this detail. |
| Upper-right notched detail: left shoulder width | 6 1/4 | 159 | Top left span from the outside left edge to the notch left edge. |
| Upper-right notched detail: right shoulder width | 6 1/4 | 159 | Top right span from the notch right edge to the outside right edge. |
| Upper-right notched detail: notch width | 5 | 130 | Horizontal span across the open-topped notch. |
| Upper-right notched detail: notch depth | 9 | 230 | Vertical span from the top edge to the bottom of the rounded notch. |
| Lower-right narrow detail: overall width | 8 1/2 | 216 | Full upper width across the separate lower-right rectangular detail. |
| Lower-right narrow detail: overall height | 15 1/4 | 390 | Full right-side height. |
| Lower-right narrow detail: inner width | 7 3/4 | 194 | Lower span between the inner left and right edges. |
| Lower-right narrow detail: internal vertical reference | 9 3/4 | 245 | Span from the upper internal line to the lower cross-member reference. |
| Lower-right narrow detail: right clearance | 1/4 | 5 | Short horizontal gap between right inner and outer lines. |
| Lower-right narrow detail: lower cross-member thickness | 0 | 3 | Short vertical callout across the lower horizontal cross-member. |
| Side section: overall top depth | 22 | 560 | Upper horizontal span from the front edge to the rear edge of the top. |
| Side section: overall height | 35 1/2 | 900 | Outermost left vertical span from the floor reference to the top surface. |
| Side section: height to underside of top | 33 1/2 | 850 | Second left vertical span from the floor reference to the underside of the top. |
| Side section: upper rail height | 2 | 50 | Upper short segment of the front vertical chain below the top. |
| Side section: front gap 1 | 0 | 2,5 | Small front gap immediately before the 1 of three front segments, counted from the top. |
| Side section: front segment 1 | 7 3/4 | 200 | Separately printed front vertical segment 1 of three, counted from the top. |
| Side section: front gap 2 | 0 | 2,5 | Small front gap immediately before the 2 of three front segments, counted from the top. |
| Side section: front segment 2 | 7 3/4 | 200 | Separately printed front vertical segment 2 of three, counted from the top. |
| Side section: front gap 3 | 0 | 2,5 | Small front gap immediately before the 3 of three front segments, counted from the top. |
| Side section: front segment 3 | 7 3/4 | 200 | Separately printed front vertical segment 3 of three, counted from the top. |
| Side section: front gap 4 | 0 | 2,5 | Small front gap between the lowest front segment and the base rail. |
| Side section: base rail height | 2 | 50 | Lower short segment of the front vertical chain. |
| Side section: floor to base-rail underside | 5 1/2 | 140 | Bottom segment of the front vertical chain, from floor to base-rail underside. |
| Side section: internal drawer-box height 1 | 6 | 150 | Vertical span within internal drawer-box outline 1 of three, counted from the top. Each has its own printed bracketed 6. |
| Side section: internal drawer-box height 2 | 6 | 150 | Vertical span within internal drawer-box outline 2 of three, counted from the top. Each has its own printed bracketed 6. |
| Side section: internal drawer-box height 3 | 6 | 150 | Vertical span within internal drawer-box outline 3 of three, counted from the top. Each has its own printed bracketed 6. |
| Side section: inner horizontal span | 17 3/4 | 454 | Middle horizontal span from a front internal reference to the rear inner reference. |
| Side section: upper rear-chain segment | 6 | 150 | Rear vertical segment from the underside of the top to the upper central reference. |
| Side section: separate rear central span | 17 1/4 | 440 | Separate vertical reference just left of the outer rear chain, with its own endpoints. |
| Side section: central rear-chain segment | 17 1/4 | 437 | Central segment of the outer rear vertical chain. It remains separate from the adjacent 440 span. |
| Side section: lower rear-chain segment | 4 | 100 | Lower segment of the outer rear vertical chain. |
| Side section: upper base width reference | 21 | 532 | Upper of two separately printed horizontal references near the base, from a front inner datum to the rear edge. |
| Side section: lower base width reference | 21 | 532 | Lower of two separately printed horizontal references near the base. |
| Side section: front base detail width | 1 | 28 | Small horizontal callout at the front of the base. |
| Side section: floor to upper base reference | 6 3/4 | 172 | Vertical span beside the rear support from the floor to the upper base reference. |
| Side section: lower front offset | 1 1/4 | 30 | Short horizontal offset at the front of the lowest horizontal reference. |
| Side section: lower overall depth | 21 3/4 | 550 | Lowest long horizontal span between the lower front and rear references. |
Source note: The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.
Source note: The central horizontal454 reference, central vertical454 reference, notched-detail height454 and side-section horizontal454 reference have different endpoints and remain separate.
Source note: The source prints bracketed zero next to 2, 2,5 and 3; no calculated replacement is substituted.
Source page 2: Front elevation, rear elevation and separate rear panel
View original PDF — Source page 2: Front elevation, rear elevation and separate rear panel
Original drawing: Front elevation, rear elevation and separate rear panel.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper front elevation has two tall central door fronts between three stacked drawer fronts at each side, vertically detailed faces and circular handle marks. The top and lower rails, legs, left overall vertical chain, separate right drawer-height chain and four-panel lower chain are dimensioned.
The lower-left rear elevation shows a central rounded rectangular opening and two lower circular features in the rear panel, with outside legs and rails. The lower-right separate panel shows the same arrangement with distinct overall sizes and locating references.
No size label is printed on either pair of circular features, and no rounded-opening radius is dimensioned on this sheet. Those dimensions are not inferred.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Front elevation: overall top width | 42 | 1066 | Upper horizontal span across the complete top assembly. |
| Front elevation: overall height | 35 1/2 | 900 | Outermost left vertical span from floor to top surface. |
| Front elevation left chain: top thickness reference | 2 | 50 | Separate segment of the left vertical chain, between the corresponding adjacent reference lines. |
| Front elevation left chain: upper rail reference | 2 | 50 | Separate segment of the left vertical chain, between the corresponding adjacent reference lines. |
| Front elevation left chain: central face height | 24 | 610 | Separate segment of the left vertical chain, between the corresponding adjacent reference lines. |
| Front elevation left chain: base rail reference | 2 | 50 | Separate segment of the left vertical chain, between the corresponding adjacent reference lines. |
| Front elevation left chain: floor-clearance reference | 5 1/2 | 140 | Separate segment of the left vertical chain, between the corresponding adjacent reference lines. |
| Front elevation right chain: top thickness reference | 2 | 50 | Separately printed short segment at the upper right of the front elevation. |
| Front elevation right chain: upper rail reference | 2 | 50 | Separately printed short segment at the upper right of the front elevation. |
| Front elevation right chain: gap 1 | 0 | 2,5 | Small gap before the 1 front segment, counted from the top. |
| Front elevation right chain: front segment 1 | 7 3/4 | 200 | Separately printed right-side vertical front segment 1 of three. |
| Front elevation right chain: gap 2 | 0 | 2,5 | Small gap before the 2 front segment, counted from the top. |
| Front elevation right chain: front segment 2 | 7 3/4 | 200 | Separately printed right-side vertical front segment 2 of three. |
| Front elevation right chain: gap 3 | 0 | 2,5 | Small gap before the 3 front segment, counted from the top. |
| Front elevation right chain: front segment 3 | 7 3/4 | 200 | Separately printed right-side vertical front segment 3 of three. |
| Front elevation right chain: gap 4 | 0 | 2,5 | Small gap after the lowest front segment and before the base rail. |
| Front elevation right chain: base rail reference | 2 | 50 | Short lower segment of the right vertical chain. |
| Front elevation right chain: floor clearance | 5 1/2 | 140 | Lowest segment of the right vertical chain. |
| Front elevation lower chain: left end member | 2 | 50 | Left end member before the first narrow gap. |
| Front elevation lower chain: gap 1 | 0 | 2 | Narrow gap before panel span 1, counted from the left. |
| Front elevation lower chain: panel span 1 | 9 1/4 | 234 | Separately printed width of panel span 1 of four, counted from the left. |
| Front elevation lower chain: gap 2 | 0 | 2 | Narrow gap before panel span 2, counted from the left. |
| Front elevation lower chain: panel span 2 | 9 1/4 | 234 | Separately printed width of panel span 2 of four, counted from the left. |
| Front elevation lower chain: gap 3 | 0 | 2 | Narrow gap before panel span 3, counted from the left. |
| Front elevation lower chain: panel span 3 | 9 1/4 | 234 | Separately printed width of panel span 3 of four, counted from the left. |
| Front elevation lower chain: gap 4 | 0 | 2 | Narrow gap before panel span 4, counted from the left. |
| Front elevation lower chain: panel span 4 | 9 1/4 | 234 | Separately printed width of panel span 4 of four, counted from the left. |
| Front elevation lower chain: gap 5 | 0 | 2 | Narrow gap after the fourth panel span. |
| Front elevation lower chain: right end member | 2 | 50 | Right end member after the final gap. |
| Rear elevation: overall width | 41 1/4 | 1046 | Upper overall horizontal span across the rear elevation. |
| Rear elevation: left edge to rectangular opening | 16 1/4 | 413 | Left segment of the upper width chain. |
| Rear elevation: rectangular opening width | 8 3/4 | 220 | Middle segment of the upper width chain across the opening. |
| Rear elevation: rectangular opening to right edge | 16 1/4 | 413 | Right segment of the upper width chain. |
| Rear elevation: top to rectangular opening | 7 1/4 | 185 | Upper left vertical segment from the rear top reference to the opening top. |
| Rear elevation: rectangular opening height | 10 3/4 | 270 | Middle left vertical segment across the opening. |
| Rear elevation: opening lower edge to floor | 15 1/2 | 395 | Lower left vertical segment from the opening bottom to floor. |
| Rear elevation: left circular-feature horizontal location | 6 1/2 | 164 | Span from the outside left edge to the left circular-feature center reference. |
| Rear elevation: right circular-feature horizontal location | 6 1/2 | 164 | Span from the right circular-feature center reference to the outside right edge. |
| Rear elevation: left circular-feature to panel bottom | 2 1/2 | 63 | Short vertical span from the left circular-feature center level to the panel bottom. |
| Rear elevation: right circular-feature to panel bottom | 2 1/2 | 63 | Separately printed short vertical span from the right circular-feature center level to the panel bottom. |
| Rear elevation: floor to circular-feature center | 13 1/4 | 337 | Vertical span from floor to the circular-feature center level, printed near the left feature. |
| Rear elevation: floor to lower rail underside | 6 3/4 | 172 | Short vertical reference from floor to the lower rail underside. |
| Separate rear panel: overall width | 38 1/4 | 974 | Upper full horizontal span across the separate panel detail. |
| Separate rear panel: left edge to rectangular opening | 14 3/4 | 377 | Left segment of the upper width chain. |
| Separate rear panel: rectangular opening width | 8 3/4 | 220 | Middle segment of the upper width chain. |
| Separate rear panel: rectangular opening to right edge | 14 3/4 | 377 | Right segment of the upper width chain. |
| Separate rear panel: overall height | 17 1/4 | 438 | Outermost right vertical span across the panel. |
| Separate rear panel: top to rectangular opening | 2 | 49 | Short upper right vertical span from panel top to opening top. |
| Separate rear panel: rectangular opening height | 10 3/4 | 270 | Right vertical span between the opening top and bottom. |
| Separate rear panel: circular-feature level to bottom | 2 1/2 | 63 | Short lower right vertical span from the circular-feature center level to panel bottom. |
| Separate rear panel: left edge to left circular-feature axis | 5 | 129 | Left segment of the lower horizontal locating chain. |
| Separate rear panel: circular-feature axis spacing | 28 1/4 | 716 | Middle segment of the lower horizontal chain between the circular-feature axes. |
| Separate rear panel: right circular-feature axis to right edge | 5 | 129 | Right segment of the lower horizontal locating chain. |
Source note: The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.
Source note: The rear-elevation circular-feature offsets 164 differ from the separate-panel offsets 129; each belongs to its own view.
Source note: Repeated 50, 234, 2, 200, 2,5 and 63 labels remain separate occurrences with their own reference points.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.