Wishlist

84.pdf — drawing text version

Bathroom vanity technical drawing (84.pdf) - text companion

PDF with text descriptions — 15 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source warnings and unresolved dimensions in mind when using this text version.

Drawing text — flagged details need confirmation

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the two source pages in 84.pdf. The visible pages contain no model or finish name. The filename identifies the source only; dimensions remain as printed, without engineering approval.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.

Source limitations

The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.

The visible source title and footer do not establish the current product model, finish, included accessories, tolerances or engineering approval.

Printed zero values, comma decimals, unpaired values and repeated labels with distinct reference points are retained.

84-source-question-mark-prefix - source page 2

Central circular feature in the separate rear panel: ? 60 / [? 2 1/4]

The rendered source uses a question-mark prefix before both values. It does not clearly print a diameter symbol.

Confirm the intended symbol and controlling dimension against the original engineering drawing before using this callout for fabrication. No correction has been made.

Source page 1: Top plan, side section, notched detail and two narrow rectangular details

View original PDF — Source page 1: Top plan, side section, notched detail and two narrow rectangular details

Original drawing: Top plan, side section, notched detail and two narrow rectangular details.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The sheet is headed TECHNICAL DRAWING, carries the WILLOW COLLECTIONS logo and the footer Solid Wood Construction Bathroom Vanity. The top plan has three narrow regions at left, center and right, separated by two broad regions with open-topped rounded-bottom notches. A small circular feature in the left broad region is not dimensioned. Nested overall widths, internal widths, two long across-plan references and a seven-panel lower chain are shown.

The lower-left side section shows the top, three internal drawer-box outlines, front vertical segments, internal depth and height references, a separate rear chain and supports. Adjacent 437 and 440 references have different endpoints and remain separate.

The separate notched rectangular detail has unequal shoulder spans 207 and 213, a repeated notch width and a corner radius. Two separate narrow rectangular details show central uprights and horizontal cross-members; their widths and half-widths differ.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Bracketed value Unbracketed value Reference points / meaning
Top plan: upper width reference 1 84 2134 Nested horizontal span 1 counted from the top, between its own left and right edge reference lines.
Top plan: upper width reference 2 83 1/4 2114 Nested horizontal span 2 counted from the top, between its own left and right edge reference lines.
Top plan: upper width reference 3 80 1/2 2044 Nested horizontal span 3 counted from the top, between its own left and right edge reference lines.
Top plan: upper width reference 4 79 1/4 2014 Nested horizontal span 4 counted from the top, between its own left and right edge reference lines.
Top plan: outside left edge to left internal datum 25 632 Upper partial horizontal span to the unnamed datum near the left notched region.
Top plan: right internal datum to outside right edge 25 632 Separate upper partial horizontal span from the unnamed datum near the right notched region.
Top plan: overall depth 22 560 Outermost left vertical span across the full plan.
Top plan: upper depth-chain segment 2 50 Upper short segment of the left vertical chain.
Top plan: middle depth-chain segment 17 3/4 450 Middle segment of the left vertical chain.
Top plan: lower depth-chain segment 2 50 Lower short segment of the left vertical chain.
Top plan: lower depth offset 1/2 10 Final small offset below the lower depth-chain segment.
Top plan: left narrow bay upper width 11 279 Upper horizontal span across the left narrow bay.
Top plan: left inset width 10 1/2 267 Horizontal span across the outer inset outline in the left narrow bay.
Top plan: left inset left half 4 1/2 113,5 Inner left edge to the central upright reference in the left inset outline.
Top plan: left inset right half 4 1/2 113,5 Central upright reference to the inner right edge in the left inset outline.
Top plan: left inset inner lower width 9 3/4 245 Lower horizontal span across the inner inset outline.
Top plan: left short vertical reference 2 3/4 68 Separate short vertical span near the lower-left inset area, between the two shown horizontal references.
Top plan: left notch width 5 130 Horizontal span across the rounded-bottom notch in the left broad region.
Top plan: left notch depth 9 230 Vertical span from the upper reference to the bottom of that notch.
Top plan: left broad inner depth 17 3/4 454 Long vertical span between the upper and lower internal references in the left broad region.
Top plan: left broad inner width 21 3/4 550 Horizontal span across the inner rectangular outline of the left broad region.
Top plan: left broad lower width 22 556 Separate lower horizontal span across the left broad region.
Top plan: left broad lower thickness reference 3/4 19 Short vertical callout across the lower member beneath that region.
Top plan: center narrow bay upper width 10 3/4 272 Upper horizontal span across the central narrow bay.
Top plan: center inset width 10 1/4 260 Horizontal span across the outer inset outline in the center bay.
Top plan: center inset left half 4 1/4 110 Inner left edge to the central upright reference in the center inset outline.
Top plan: center inset right half 4 1/4 110 Central upright reference to the inner right edge in the center inset outline.
Top plan: center inset inner width 9 1/4 238 Lower horizontal span across the inner inset outline in the center bay.
Top plan: right broad left shoulder reference 210 Horizontal span from the inner left edge of the right broad region to the left edge of its notch; no bracketed companion value is printed.
Top plan: right broad right shoulder reference 210 Separate horizontal span from the right edge of the notch to the inner right edge of that region; no bracketed companion value is printed.
Top plan: right notch width 5 130 Horizontal span across the rounded-bottom notch in the right broad region.
Top plan: right notch depth 9 230 Vertical span from the upper reference to the bottom of that notch.
Top plan: right broad depth reference 20 1/2 519 Long vertical span in the right broad region, with endpoints distinct from the left 454 span.
Top plan: upper long internal width 81 2058 Upper of the two separately printed long horizontal spans across the plan.
Top plan: lower long internal width 81 2058 Lower of the two separately printed long horizontal spans across the plan.
Top plan: right inset left half 4 1/2 113,5 Inner left edge to central upright reference in the right narrow inset outline.
Top plan: right inset right half 4 1/2 113,5 Central upright reference to inner right edge in the right narrow inset outline.
Top plan: right narrow bay lower width 11 3/4 301 Lower horizontal span across the right narrow bay.
Top plan lower chain: outside left offset 1/2 10 Small offset at the outside left end.
Top plan lower chain: left end member 2 50 Left end member before the first gap.
Top plan lower chain: gap 1 0 2 Narrow gap immediately before panel span 1, counted from the left.
Top plan lower chain: panel span 1 11 1/4 285 Separately printed panel span 1 of seven, counted from the left.
Top plan lower chain: gap 2 0 2 Narrow gap immediately before panel span 2, counted from the left.
Top plan lower chain: panel span 2 11 1/4 285 Separately printed panel span 2 of seven, counted from the left.
Top plan lower chain: gap 3 0 2 Narrow gap immediately before panel span 3, counted from the left.
Top plan lower chain: panel span 3 11 1/4 285 Separately printed panel span 3 of seven, counted from the left.
Top plan lower chain: gap 4 1/4 3,5 Narrow gap immediately before panel span 4, counted from the left.
Top plan lower chain: panel span 4 11 1/4 285 Separately printed panel span 4 of seven, counted from the left.
Top plan lower chain: gap 5 1/4 3,5 Narrow gap immediately before panel span 5, counted from the left.
Top plan lower chain: panel span 5 11 1/4 285 Separately printed panel span 5 of seven, counted from the left.
Top plan lower chain: gap 6 0 2 Narrow gap immediately before panel span 6, counted from the left.
Top plan lower chain: panel span 6 11 1/4 285 Separately printed panel span 6 of seven, counted from the left.
Top plan lower chain: gap 7 0 2 Narrow gap immediately before panel span 7, counted from the left.
Top plan lower chain: panel span 7 11 1/4 285 Separately printed panel span 7 of seven, counted from the left.
Top plan lower chain: gap 8 0 2 Final gap after the seventh panel span.
Top plan lower chain: right end member 2 50 Right end member after the final gap.
Top plan lower chain: outside right offset 1/2 10 Small offset at the outside right end.
Side section: overall top depth 22 560 Upper horizontal span across the top.
Side section: overall height 35 1/2 900 Outermost left vertical span from floor to top surface.
Side section: height to top underside 33 1/2 850 Separate left vertical span from floor to underside of the top.
Side section: upper front rail 2 50 Upper short segment of the front vertical chain below the top.
Side section: front gap 1 0 2,5 Small front gap immediately before front segment 1, counted from the top.
Side section: front segment 1 7 3/4 200 Separately dimensioned front segment 1 of three, counted from the top.
Side section: front gap 2 0 2,5 Small front gap immediately before front segment 2, counted from the top.
Side section: front segment 2 7 3/4 200 Separately dimensioned front segment 2 of three, counted from the top.
Side section: front gap 3 0 2,5 Small front gap immediately before front segment 3, counted from the top.
Side section: front segment 3 7 3/4 200 Separately dimensioned front segment 3 of three, counted from the top.
Side section: front gap 4 0 2,5 Gap between the lowest front segment and base rail.
Side section: base rail height 2 50 Lower short segment of the front vertical chain.
Side section: floor to base-rail underside 5 1/2 140 Bottom segment of the front vertical chain.
Side section: upper internal offset 2 1/4 56 Short internal vertical span from the underside of the top to the upper internal reference.
Side section: drawer-box height 1 6 150 Vertical height within the 1 internal drawer-box outline, counted from the top.
Side section: drawer-box height 2 6 150 Vertical height within the 2 internal drawer-box outline, counted from the top.
Side section: drawer-box height 3 6 150 Vertical height within the 3 internal drawer-box outline, counted from the top.
Side section: longer internal horizontal reference 20 1/2 518 Middle horizontal span from the front-side reference to the rear internal reference.
Side section: shorter internal horizontal reference 17 3/4 454 Separate horizontal span from a further inset front reference to the rear internal reference.
Side section: left internal vertical reference 23 3/4 605 Vertical span beside the internal fronts, between upper and lower internal reference lines.
Side section: lower internal vertical reference 10 1/2 266 Vertical span from the lower internal reference to the middle shelf reference.
Side section: right internal vertical reference 23 3/4 604 Separate vertical span nearer the rear side, between its own upper and lower internal references.
Side section: rear upper-chain segment 6 150 Rear vertical span from the underside of the top to the upper central reference.
Side section: rear middle-chain segment 17 1/4 437 Central segment of the outer rear vertical chain.
Side section: separate rear central span 17 1/4 440 Adjacent rear vertical span with endpoints separate from the 437 span.
Side section: rear lower-chain segment 4 100 Lower segment of the outer rear vertical chain.
Side section: upper base width reference 21 532 Upper of two separately printed horizontal references near the base.
Side section: lower base width reference 21 532 Lower of two separately printed horizontal references near the base.
Side section: front base detail width 1 28 Short horizontal callout at the front of the base.
Side section: floor to upper base reference 6 3/4 172 Vertical span from floor to the upper base reference beside the rear support.
Side section: lower front offset 1 1/4 30 Lowest short horizontal offset at the front.
Separate notched detail: overall width 21 3/4 550 Full width across the separate rectangular detail.
Separate notched detail: overall height 17 3/4 454 Full right-side height.
Separate notched detail: left shoulder width 8 1/4 207 Top chain from left outside edge to left notch edge.
Separate notched detail: upper notch width 5 130 Middle segment of the top chain across the notch.
Separate notched detail: right shoulder width 8 1/2 213 Top chain from right notch edge to outside right edge.
Separate notched detail: lower notch width 5 130 Separately printed horizontal span across the notch lower down.
Separate notched detail: notch depth 9 230 Vertical span from the top edge to notch bottom.
Separate notched detail: notch corner radius R1 R25 Leader points to a curved lower corner of the open-topped notch.
Lower-right left narrow detail: overall width 10 1/4 260 Full upper width of this separate rectangular outline.
Lower-right left narrow detail: overall height 15 1/4 390 Full right-side height.
Lower-right left narrow detail: left inner half 4 1/4 110 Inner left edge to central upright reference.
Lower-right left narrow detail: right inner half 4 1/4 110 Central upright reference to inner right edge.
Lower-right left narrow detail: inner lower width 9 1/4 238 Lower horizontal span between the inner side references.
Lower-right left narrow detail: inner vertical reference 9 3/4 245 Vertical span from the upper internal reference to the lower cross-member.
Lower-right left narrow detail: right clearance 1/4 5 Short horizontal gap between right inner and outer edges.
Lower-right left narrow detail: lower cross-member thickness 0 3 Short vertical span across the lower horizontal cross-member.
Lower-right right narrow detail: overall width 10 1/2 267 Full upper width of this separate rectangular outline.
Lower-right right narrow detail: overall height 15 1/4 390 Full right-side height.
Lower-right right narrow detail: left inner half 4 1/2 113,5 Inner left edge to central upright reference.
Lower-right right narrow detail: right inner half 4 1/2 113,5 Central upright reference to inner right edge.
Lower-right right narrow detail: inner lower width 9 3/4 245 Lower horizontal span between the inner side references.
Lower-right right narrow detail: inner vertical reference 9 3/4 245 Vertical span from the upper internal reference to the lower cross-member.
Lower-right right narrow detail: right clearance 1/4 5 Short horizontal gap between right inner and outer edges.
Lower-right right narrow detail: lower cross-member thickness 0 3 Short vertical span across the lower horizontal cross-member.

Source note: The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.

Source note: The two 210 labels beside the right plan notch have no printed bracketed companion values.

Source note: The plan depth references 454 and 519 have distinct endpoints. The side-section internal heights 605 and 604 also remain separate.

Source note: The lower plan chain contains seven 285 spans, six 2 gaps and two 3,5 gaps; each printed gap or span is retained separately.

Back to contents

Source page 2: Front elevation, rear elevation and separate rear panel

View original PDF — Source page 2: Front elevation, rear elevation and separate rear panel

Original drawing: Front elevation, rear elevation and separate rear panel.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The front elevation has three narrow banks of three stacked drawer fronts at left, center and right, with two tall paired-door regions between them. Vertical face lines, circular handle marks, legs and rails are shown. Seven short face references, the left and right vertical chains and the five-bay lower support chain are separately dimensioned.

The rear elevation has two rounded rectangular openings and a lower central circular feature in a wide rear panel. Top-chain spans, opening-center references, floor heights and two lower half-width references are shown.

The separate rear-panel drawing shows the two rounded rectangular openings and central lower circular feature with distinct overall panel dimensions, opening locations and repeated opening size labels. The circular-feature leader contains question-mark prefixes in the rendered source.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Bracketed value Unbracketed value Reference points / meaning
Front elevation: overall top width 84 2134 Upper horizontal span across the complete top.
Front elevation: left partial width reference 25 632 Outside left edge to the unnamed datum in the left broad region.
Front elevation: right partial width reference 25 632 Separate span from the unnamed datum in the right broad region to the outside right edge.
Front elevation: left overall height 35 1/2 900 Left vertical span from floor to the top surface.
Front elevation left chain: top thickness 2 50 Segment of the left vertical chain between the corresponding adjacent horizontal reference lines.
Front elevation left chain: upper rail 2 50 Segment of the left vertical chain between the corresponding adjacent horizontal reference lines.
Front elevation left chain: central face height 24 610 Segment of the left vertical chain between the corresponding adjacent horizontal reference lines.
Front elevation left chain: base rail 2 50 Segment of the left vertical chain between the corresponding adjacent horizontal reference lines.
Front elevation left chain: floor clearance 5 1/2 140 Segment of the left vertical chain between the corresponding adjacent horizontal reference lines.
Front elevation: narrow left face width 11 279 Horizontal reference across the upper drawer face in the left narrow bank.
Front elevation: narrow center face width 10 3/4 272 Horizontal reference across the upper drawer face in the center bank.
Front elevation: face reference 1 2 3/4 69,75 Left drawer face left edge to the adjacent internal vertical face reference. One of seven separately printed short horizontal spans, counted from the left.
Front elevation: face reference 2 2 3/4 69,75 Left drawer centerline to the adjacent vertical face reference on its right. One of seven separately printed short horizontal spans, counted from the left.
Front elevation: face reference 3 2 3/4 69,75 Left broad region left edge to the next internal vertical face reference. One of seven separately printed short horizontal spans, counted from the left.
Front elevation: face reference 4 2 3/4 69,75 Center drawer central handle axis to the nearby vertical face reference on its left. One of seven separately printed short horizontal spans, counted from the left.
Front elevation: face reference 5 2 3/4 69,75 Right broad region left edge to the next internal vertical face reference. One of seven separately printed short horizontal spans, counted from the left.
Front elevation: face reference 6 2 3/4 69,75 Right drawer left edge to the next internal vertical face reference. One of seven separately printed short horizontal spans, counted from the left.
Front elevation: face reference 7 2 3/4 69,75 Right drawer central handle axis to the nearby vertical face reference on its left. One of seven separately printed short horizontal spans, counted from the left.
Front elevation: left broad handle reference offset 2 50 Horizontal span from the left circular mark near the left broad-region center to the nearby central vertical reference.
Front elevation: handle-level vertical reference 4 100 Vertical span from the upper face reference to the level of the circular handle marks in the left broad region.
Front elevation: right height to top underside 33 1/2 850 Right vertical span from floor to the underside of the top.
Front elevation: right overall height 35 1/2 900 Separately printed right vertical span from floor to the top surface.
Front elevation right chain: upper rail 2 50 Short upper segment beneath the top.
Front elevation right chain: gap 1 0 2,5 Small gap before front segment 1, counted from the top.
Front elevation right chain: front segment 1 7 3/4 200 Separate vertical front segment 1 of three.
Front elevation right chain: gap 2 0 2,5 Small gap before front segment 2, counted from the top.
Front elevation right chain: front segment 2 7 3/4 200 Separate vertical front segment 2 of three.
Front elevation right chain: gap 3 0 2,5 Small gap before front segment 3, counted from the top.
Front elevation right chain: front segment 3 7 3/4 200 Separate vertical front segment 3 of three.
Front elevation right chain: gap 4 0 2,5 Small gap after the lowest front segment.
Front elevation right chain: base rail 2 50 Short lower segment above the floor-clearance span.
Front elevation right chain: floor clearance 5 1/2 140 Lowest segment from floor to base-rail underside.
Front elevation: foot detail 1 1 1/4 30 Short horizontal foot-width reference at the outside left leg.
Front elevation: foot detail 2 1 1/4 30 Short horizontal foot-width reference at the next leg to the right.
Front elevation lower chain: left end member 1 28 Leftmost short member in the lower horizontal chain.
Front elevation lower chain: bay span 1 11 3/4 301 Width between the corresponding supports for bay 1 of five, counted from the left.
Front elevation lower chain: internal member 1 3/4 18 Short member immediately after bay 1 in the lower chain.
Front elevation lower chain: bay span 2 22 556 Width between the corresponding supports for bay 2 of five, counted from the left.
Front elevation lower chain: internal member 2 3/4 18 Short member immediately after bay 2 in the lower chain.
Front elevation lower chain: bay span 3 10 3/4 272 Width between the corresponding supports for bay 3 of five, counted from the left.
Front elevation lower chain: internal member 3 3/4 18 Short member immediately after bay 3 in the lower chain.
Front elevation lower chain: bay span 4 22 556 Width between the corresponding supports for bay 4 of five, counted from the left.
Front elevation lower chain: internal member 4 3/4 18 Short member immediately after bay 4 in the lower chain.
Front elevation lower chain: bay span 5 11 3/4 301 Width between the corresponding supports for bay 5 of five, counted from the left.
Front elevation lower chain: right end member 1 28 Rightmost short member in the lower horizontal chain.
Rear elevation upper chain: span 1 20 1/4 512 Outside left edge to left rectangular opening.
Rear elevation upper chain: span 2 8 3/4 220 Across the left rectangular opening.
Rear elevation upper chain: span 3 25 1/2 650 Between the inner edges of the two rectangular openings.
Rear elevation upper chain: span 4 8 3/4 220 Across the right rectangular opening.
Rear elevation upper chain: span 5 20 1/4 512 Right rectangular opening to outside right edge.
Rear elevation: top to rectangular-opening level 7 1/4 185 Upper left vertical-chain segment from the upper rear reference to the tops of the rounded rectangular openings.
Rear elevation: rectangular-opening height 10 3/4 270 Middle left vertical-chain segment across the opening height.
Rear elevation: opening lower edge to floor 15 1/2 395 Lower left vertical-chain segment from opening bottom to floor.
Rear elevation: left opening center reference 24 1/2 622 Horizontal span from outside left edge to the center reference of the left rectangular opening.
Rear elevation: right opening center reference 24 1/2 622 Horizontal span from the center reference of the right rectangular opening to outside right edge.
Rear elevation: floor to lower rail underside 6 3/4 172 Short vertical span from floor to lower rail underside near the left support.
Rear elevation: floor to circular-feature center 13 1/4 337 Vertical span from floor to the center level of the central circular feature.
Rear elevation: left half-width reference 41 1/2 1057 Lower horizontal span from outside left edge to the central vertical reference.
Rear elevation: right half-width reference 41 1/2 1057 Lower horizontal span from central reference to outside right edge.
Separate rear panel: overall width 80 1/2 2042 Full upper horizontal span across the panel.
Separate rear panel upper chain: span 1 18 3/4 476 Left panel edge to left rectangular opening.
Separate rear panel upper chain: span 2 8 3/4 220 Across the left rectangular opening.
Separate rear panel upper chain: span 3 25 1/2 650 Between the inner edges of the two rectangular openings.
Separate rear panel upper chain: span 4 8 3/4 220 Across the right rectangular opening.
Separate rear panel upper chain: span 5 18 3/4 476 Right rectangular opening to right panel edge.
Separate rear panel: left opening width 8 3/4 220 Separately printed horizontal span within the left rounded rectangular opening.
Separate rear panel: left opening height 10 3/4 270 Separately printed vertical span within the left rounded rectangular opening.
Separate rear panel: right opening width 8 3/4 220 Separately printed horizontal span within the right rounded rectangular opening.
Separate rear panel: right opening height 10 3/4 270 Separately printed vertical span within the right rounded rectangular opening.
Separate rear panel: overall height 17 1/4 438 Outermost right vertical span across the panel.
Separate rear panel: top-to-opening offset 2 49 Short upper right vertical span from panel top to opening top.
Separate rear panel: outer opening-height reference 10 3/4 270 Additional right-side vertical span from rectangular-opening top to bottom.
Separate rear panel: circular-feature level to bottom 2 1/2 63 Short vertical span from central circular-feature center level to panel bottom.
Separate rear panel: left edge to circular-feature axis 40 1/4 1021 Lower horizontal span from left panel edge to the central circular-feature axis.
Separate rear panel: central circular-feature source notation ? 2 1/4 ? 60 Diagonal leader across the central circular feature. Both printed prefixes appear as question marks; they are retained rather than interpreted as diameter symbols.Unresolved: 84-source-question-mark-prefix

Source note: The source shows unbracketed and bracketed numeric labels without an explicit unit legend. Both sets are retained separately without inferred units or conversions.

Source note: The rear-elevation outside-edge chain uses 512 at both ends, while the separate rear-panel chain uses 476. These belong to different views.

Source note: The circular-feature notation is preserved as ? 60 and [? 2 1/4]; no diameter-symbol correction is made.

Source note: All seven 69,75 face-reference spans and both 30 foot references are separate printed occurrences.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.