Wishlist

Aberdeen 36 left offset vanity - drawing text version

Aberdeen 36 left offset vanity - original drawing text companion

PDF with text descriptions — 23 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the ten source pages. All printed values, separate cabinet views and alternative countertop styles remain distinct. No engineering measurements are inferred or approved.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

The source does not establish current approval, purchased accessories or a controlling measurement unit. Inches and millimeters are copied separately.

The cabinet top view prints 21-5/8 in/550 mm; the side view prints 21-3/4 in/550 mm. Both labels are preserved without reconciliation.

The Double Cove title 1.5 IN and detailed edge 1-5/8 in/40 mm are kept separately; no nominal-versus-actual ruling is made.

Source page 1: Aberdeen 36 single left offset sink vanity overview

View original PDF — Source page 1: Aberdeen 36 single left offset sink vanity overview

Original drawing: Aberdeen 36 single left offset sink vanity overview.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective of an open-top cabinet on four feet with turned corner posts. Two doors occupy the upper left area; three small drawer fronts are stacked at the upper right. Below the horizontal rail are a wide left drawer front and a smaller right drawer front. The drawer box at the right and the open left interior are visible. No countertop or dimension-line callouts appear on this overview.

The source title reads ABERDEEN 36 IN SINGLE LEFT OFFSET SINK BATHROOM VANITY. Footer: Willow Bath and Vanity; willowbathandvanity.com; info@willowbathandvanity.com; 1-877-788-8444.

No dimension callouts are printed on this overview page.

Back to contents

Source page 2: Cabinet front view

View original PDF — Source page 2: Cabinet front view

Original drawing: Cabinet front view.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Two upper left doors and a right column of three drawer fronts sit above a full-width horizontal rail. A wide lower left front and a smaller lower right front sit below that rail. Turned posts and feet frame the elevation. A dashed horizontal shelf reference appears across the door area; pull-hole centers are marked with crosses.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall cabinet width 35-1/4 894 Full outside horizontal span above the front elevation.
Combined left door-region width 19-7/8 506 Upper horizontal span across the pair of door fronts.
Right drawer-column width 10-1/4 260 Upper horizontal span across the narrow right drawer column.
Overall cabinet height 33-1/2 850 Left outer vertical span from cabinet top to the bottom foot reference.
Upper door-region height 20-1/2 521 Left vertical span from below the top rail to the middle rail.
Lower drawer-front height 6-7/8 175 Left vertical span between the middle and bottom rails.
Lower rail to foot reference 4 100 Left lowest vertical segment from underside of the bottom rail to bottom foot reference.
Door bottom to dashed shelf reference 9-1/2 240 Vertical span within the left door from its lower edge to the lower dashed shelf line.
Door pull-hole spacing 5 128 Vertical center spacing indicated beside the door pull-hole pairs.
Upper right drawer pull-hole spacing 3-3/4 96 Horizontal spacing between marked pull-hole centers of the top right drawer front.
Lower left drawer pull-hole spacing 5 128 Horizontal center spacing of the two holes on the wide bottom-left front.
Top right drawer-front height 6-3/4 171 First vertical segment of the right-side drawer-front chain.
Middle right drawer-front height 6-3/4 171 Second vertical segment of the right-side drawer-front chain.
Third right drawer-front height 6-3/4 171 Third vertical segment of the right-side drawer-front chain above the middle rail.

Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.

Back to contents

Source page 3: Cabinet top view

View original PDF — Source page 3: Cabinet top view

Original drawing: Cabinet top view.

Original source page 3, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Plan of the cabinet frame with a broad left bay and a narrow right bay. Dashed drawer outlines occupy the left bay; a solid rectangular box outline appears in the right bay. Three dimensions show the outside width, outside depth and the left dashed inner front-to-back span.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 3 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall cabinet width 35-1/4 894 Full outside horizontal span across the plan.
Overall cabinet depth 21-5/8 550 Full outside front-to-back span along the left side of the plan.
Left internal drawer reference depth 16 410 Front-to-back span between the upper and lower dashed references inside the left bay.

Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.

Source note: This top view prints cabinet depth as 21-5/8 in/550 mm; the side view on page 5 prints 21-3/4 in/550 mm. Both printed labels are preserved without choosing or recalculating either.

Back to contents

Source page 4: Cabinet back view

View original PDF — Source page 4: Cabinet back view

Original drawing: Cabinet back view.

Original source page 4, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Rear elevation with one rounded rectangular opening toward the right as viewed from behind. The upper horizontal chain locates the opening between the cabinet sides. The right vertical chain locates the opening between the cabinet top and the lower foot reference. No separate circular feature is shown.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 4 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall rear width 35-1/4 894 Full outside horizontal span across the rear elevation.
Left edge to rear opening 19-1/4 490 Left segment of the upper chain from outside left edge to opening left edge.
Rear opening width 8-5/8 220 Middle segment of the upper chain across the opening.
Rear opening to right edge 7-1/4 184 Right segment of the upper chain from opening right edge to outside right edge.
Cabinet top to opening top 7-1/8 180 Upper segment of the right vertical chain.
Rear opening height 11-3/4 300 Middle segment of the right vertical chain across the opening.
Opening bottom to foot reference 14-5/8 370 Lower segment of the right vertical chain from the opening bottom to the lower foot reference.

Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.

Back to contents

Source page 5: Cabinet side view

View original PDF — Source page 5: Cabinet side view

Original drawing: Cabinet side view.

Original source page 5, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Side elevation with turned posts and feet and four vertically stacked internal drawer-box outlines drawn with dashed lines. A curved outline appears above and within the upper box. The front of the cabinet is drawn at the right. The page labels overall depth and each of the four internal box heights, without an overall-height dimension.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 5 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall cabinet depth 21-3/4 550 Full outside horizontal span above the side view.
Upper internal drawer-box height 3-3/4 96 Vertical span across the highest dashed internal drawer box.
Second internal drawer-box height 4-5/8 116 Vertical span across the second dashed box from the top.
Third internal drawer-box height 4-5/8 116 Vertical span across the third dashed box from the top.
Bottom internal drawer-box height 4-5/8 116 Vertical span across the lowest dashed box below the middle rail.

Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.

Source note: This side view prints cabinet depth as 21-3/4 in/550 mm; the top view on page 3 prints 21-5/8 in/550 mm. Both printed labels are preserved without choosing or recalculating either.

Back to contents

Source page 6: 36 IN left offset 2 IN Straight Mitered Edge countertop overview

View original PDF — Source page 6: 36 IN left offset 2 IN Straight Mitered Edge countertop overview

Original drawing: 36 IN left offset 2 IN Straight Mitered Edge countertop overview.

Original source page 6, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective of a rectangular countertop with a straight deep front edge, one sink opening offset to the left, one faucet hole behind the opening and a full rear backsplash. The title identifies 2 IN Straight Mitered Edge; no dimension-line callouts occur on this page.

No dimension callouts are printed on this overview page.

Back to contents

Source page 7: Straight Mitered Edge countertop dimensions

View original PDF — Source page 7: Straight Mitered Edge countertop dimensions

Original drawing: Straight Mitered Edge countertop dimensions.

Original source page 7, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The top group is a separate backsplash front elevation and narrow side profile. A horizontal edge elevation is below it. The lower group is the countertop plan with a left offset opening, faucet hole and four small bracket holes. A separate narrow edge section appears at the right.

Two leaders read 45 Degree Mitered Edge: one at the horizontal edge elevation and one at the lower right countertop corner. The SINK BRACKET leader identifies small mounting-hole symbols, not the opening itself. Opening positions and bracket-hole positions have separate horizontal and vertical chains. The source states these dimensions apply exclusively to Straight Mitered Edge countertops; Double Cove Edge is a separate section.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 7 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 36 914 Horizontal span of the separate rectangular backsplash elevation.
Backsplash height 3-7/8 100 Vertical span of the backsplash elevation.
Backsplash thickness 3/4 20 Horizontal thickness of the narrow backsplash side profile.
Mitered edge overall height 2 50 Vertical overall height of the horizontal edge elevation.
Mitered edge left wall width 3/4 20 Short horizontal span of the left return in the edge elevation.
Mitered edge right wall width 3/4 20 Short horizontal span of the right return in the edge elevation.
Top plan: outside width 36 914 Full horizontal width of the countertop plan.
Top plan: left edge to faucet axis 12 304 Upper split dimension from the left outside edge to the faucet and sink axis.
Top plan: faucet axis to right edge 24 610 Upper split dimension from the faucet and sink axis to the right outside edge.
Top plan: outside depth 22 560 Full front-to-back span of the countertop.
Top plan: rear edge to opening 5-1/2 140 Vertical segment from the outside rear edge to the rear edge of the sink opening.
Top plan: opening depth 12-1/4 310 Front-to-back span across the sink opening.
Top plan: opening to front edge 4-3/8 110 Vertical segment from the opening front edge to the outside front edge.
Top plan: rear edge to faucet center 2-3/4 70 Short vertical span from the rear edge to the round faucet-hole center.
Top plan: faucet-hole diameter 1-3/8 35 Diameter leader at the single round faucet hole.
Top plan: rear edge to rear bracket row 6-3/4 170 Internal vertical span from the rear outside edge to the rear bracket-hole row.
Top plan: bracket row spacing 9-7/8 250 Vertical distance between rear and front bracket-hole rows.
Top plan: front bracket row to front edge 5-1/2 140 Vertical span from the front bracket row to the front outside edge.
Top plan: left edge to opening 3-1/4 84 Left segment of the bottom opening chain, from the outside edge to the left side of the opening.
Top plan: opening width 17-3/8 440 Horizontal span across the sink opening.
Top plan: opening to right edge 15-3/8 390 Right segment from the opening right edge to the countertop right outside edge.
Top plan: left edge to bracket column 1-1/8 27 Left segment of the lowest horizontal chain to the left bracket column.
Top plan: bracket-column spacing 21-3/4 554 Horizontal separation of the two bracket-column references.
Top plan: bracket column to right edge 13-1/8 333 Right segment of the lowest horizontal chain to the outside right edge.
Separate edge section: transverse span 2 50 Horizontal width above the narrow vertical edge-section drawing.
Separate edge section: upper wall 3/4 20 Short vertical span at the upper end of the separate edge section.
Separate edge section: lower wall 3/4 20 Short vertical span at the lower end of the separate edge section.
Sink opening corner label:4-R10 Not printed separately Not printed separately Leader labels four opening corners 4-R 10; no separate unit is printed on this radius label.

Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.

Back to contents

Source page 8: Standard rectangular undermount sink

View original PDF — Source page 8: Standard rectangular undermount sink

Original drawing: Standard rectangular undermount sink.

Original source page 8, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Plan view at the left has a hatched outer flange and sloped bowl surfaces, with a round opening and small oval feature shown inside. A curved bowl section with flange is drawn at the right. Five dimensions describe the outside flange, inner opening and sectional height. Separate diameters for the illustrated interior features are not given.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 8 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Sink outside width 20-1/8 511 Full horizontal width including the outer flange in plan view.
Sink outside depth 15 381 Full front-to-back outside span including the flange.
Sink inner opening width 17-3/4 451 Horizontal inner-opening span between the inner flange edges.
Sink inner opening depth 12-5/8 320.6 Front-to-back inner-opening span between the inner flange edges.
Sink section height 7-5/8 193.6 Vertical height indicated beside the sectional view.

Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.

Back to contents

Source page 9: 36 IN left offset 1.5 IN Double Cove Edge countertop overview

View original PDF — Source page 9: 36 IN left offset 1.5 IN Double Cove Edge countertop overview

Original drawing: 36 IN left offset 1.5 IN Double Cove Edge countertop overview.

Original source page 9, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective of a molded countertop with one opening offset to the left, a faucet hole behind it, a layered front and side edge and a molded rear backsplash. The title uses 1.5 IN Double Cove Edge; no dimension-line callouts occur on this overview.

No dimension callouts are printed on this overview page.

Back to contents

Source page 10: Double Cove Edge countertop dimensions

View original PDF — Source page 10: Double Cove Edge countertop dimensions

Original drawing: Double Cove Edge countertop dimensions.

Original source page 10, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Separate molded backsplash elevation and narrow side profile are at the top; a cove-edge elevation is below them. The bottom plan contains a left offset sink opening, faucet hole and four bracket-hole symbols, plus a separate narrow edge section at the right. The 1-inch rear inset and 2-inch side/front bands are separate from the opening and bracket setbacks.

The source says these dimensions apply exclusively to Double Cove Edge countertops. Its nominal title says 1.5 IN while the detailed edge height is 1-5/8 in/40 mm; both labels are retained without deciding the intended nominal/actual distinction. The source opening front setback reads 4-3/8 in/110 mm.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 10 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 33-7/8 860 Horizontal width of the separate molded backsplash elevation.
Backsplash height 3-7/8 100 Vertical span of the backsplash elevation.
Backsplash thickness 3/4 20 Horizontal thickness of the narrow side profile.
Cove edge overall height 1-5/8 40 Vertical span of the cove-edge elevation; the title separately calls this style 1.5 IN.
Cove edge upper segment 3/4 20 Short vertical segment at the upper part of the edge elevation.
Cove edge lower segment 3/4 20 Short vertical segment at the lower part of the edge elevation.
Top plan: outside width 36 914 Full horizontal width of the countertop plan.
Top plan: left edge to faucet axis 12 304 Upper split dimension from the left outside edge to the faucet and sink axis.
Top plan: faucet axis to right edge 24 610 Upper split dimension from the faucet and sink axis to the right outside edge.
Top plan: outside depth 22 560 Full front-to-back span of the countertop.
Top plan: rear edge to opening 5-1/2 140 Vertical segment from the outside rear edge to the rear edge of the sink opening.
Top plan: opening depth 12-1/4 310 Front-to-back span across the sink opening.
Top plan: opening to front edge 4-3/8 110 Vertical segment from the opening front edge to the outside front edge.
Top plan: rear edge to faucet center 2-3/4 70 Short vertical span from the rear edge to the round faucet-hole center.
Top plan: faucet-hole diameter 1-3/8 35 Diameter leader at the single round faucet hole.
Top plan: rear edge to rear bracket row 6-3/4 170 Internal vertical span from the rear outside edge to the rear bracket-hole row.
Top plan: bracket row spacing 9-7/8 250 Vertical distance between rear and front bracket-hole rows.
Top plan: front bracket row to front edge 5-1/2 140 Vertical span from the front bracket row to the front outside edge.
Top plan: left edge to opening 3-1/4 84 Left segment of the bottom opening chain, from the outside edge to the left side of the opening.
Top plan: opening width 17-3/8 440 Horizontal span across the sink opening.
Top plan: opening to right edge 15-3/8 390 Right segment from the opening right edge to the countertop right outside edge.
Top plan: left edge to bracket column 1-1/8 27 Left segment of the lowest horizontal chain to the left bracket column.
Top plan: bracket-column spacing 21-3/4 554 Horizontal separation of the two bracket-column references.
Top plan: bracket column to right edge 13-1/8 333 Right segment of the lowest horizontal chain to the outside right edge.
Top plan: rear inset reference 1 25 Short vertical span from the rear outside edge to the dashed inset line.
Top plan: right inset band 2 50 Short horizontal span across the inset band at the right side of the plan.
Top plan: front inset band 2 50 Short vertical span from the front outside edge to the front inset reference.
Separate edge section: transverse span 1-5/8 40 Horizontal width above the separate narrow edge section.
Sink opening corner label:4-R20 Not printed separately Not printed separately Leader labels four opening corners 4-R 20; no separate unit is printed on this radius label.

Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.