Aberdeen 60 single sink vanity - drawing text version
Aberdeen 60 single sink vanity - source drawing text version
PDF with text descriptions — 24 pages.
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of all ten source pages. Every printed dimension callout is retained with its view and reference points. Cabinet dimensions, alternative countertop styles and sink dimensions remain distinct. No engineering approval is inferred.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.
Source limitations
The source does not establish current engineering approval, purchased accessories or a controlling measurement unit. Inches and millimeters are copied independently as printed.
The Double Cove title 1.5 IN and detailed edge labels 1-5/8 inches / 40 mm remain distinct; this transcription does not decide nominal versus actual thickness.
Source page 1: Aberdeen 60 single sink cabinet overview
View original PDF — Source page 1: Aberdeen 60 single sink cabinet overview
Original drawing: Aberdeen 60 single sink cabinet overview.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective drawing of an open-top cabinet with decorative corner posts and tapered feet. Broad recessed-panel doors flank three stacked central fronts; three additional fronts run across the bottom. An open internal frame, two dividers and rear panels are visible. No countertop or separate dimension callouts appear on this overview.
The title reads ABERDEEN 60 IN SINGLE SINK BATHROOM VANITY. Footer: Willow Bath and Vanity; willowbathandvanity.com; info@willowbathandvanity.com; 1-877-788-8444.
No dimension callouts are printed on this overview page.
Source page 2: Cabinet front view
View original PDF — Source page 2: Cabinet front view
Original drawing: Cabinet front view.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The elevation has broad left and right doors, three central upper drawer fronts and three lower fronts. Separate dimensions label each front width, central front height, door pull spacing and selected drawer pull spacing. A dashed shelf reference crosses the door region.
A leader at the central horizontal divider is labeled Double Drawer with Power Station and Organizer. This printed label does not provide electrical or installation specifications.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet width | 59-1/4 | 1505 | Full outside horizontal span above the front elevation. |
| Left door region width | 17-7/8 | 453 | Upper left horizontal span across the left broad front. |
| Central front width | 17-7/8 | 453 | Upper middle horizontal span across the central column. |
| Right door region width | 17-7/8 | 453 | Upper right horizontal span across the right broad front. |
| Overall cabinet height | 33-1/2 | 850 | Full vertical span from cabinet top to the lower foot reference. |
| Upper door region height | 20-1/2 | 521 | Left vertical span from below the top rail to above the middle rail. |
| Lower front height | 6-7/8 | 175 | Left vertical span across the lower drawer front between the horizontal rails. |
| Lower rail to foot reference | 4 | 100 | Left lower vertical span from underside of the bottom rail to the lower foot reference. |
| Left door bottom to dashed shelf reference | 9-1/2 | 240 | Vertical span inside the left door, from its lower edge to the lower dashed shelf line. |
| Left door pull-hole spacing | 5 | 128 | Vertical center-to-center span between the two marked holes in the left door. |
| Right door pull-hole spacing | 5 | 128 | Vertical center-to-center span between the two marked holes in the right door. |
| Central upper drawer pull-hole spacing | 5 | 128 | Horizontal center-to-center span of the upper central front's two holes. |
| Lower left drawer pull-hole spacing | 5 | 128 | Horizontal center-to-center span between the two marked holes on the lower left front. |
| Lower right drawer pull-hole spacing | 5 | 128 | Horizontal center-to-center span between the two marked holes on the lower right front. |
| Central top front height | 6-3/4 | 171 | First vertical segment at the right edge of the central upper column. |
| Central middle front height | 6-3/4 | 171 | Second vertical segment at the right edge of the central upper column. |
| Central third front height | 6-3/4 | 171 | Third vertical segment above the middle rail. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.
Source page 3: Cabinet top view
View original PDF — Source page 3: Cabinet top view
Original drawing: Cabinet top view.
Original source page 3, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The plan shows the outside frame, three internal bays and a central U-shaped recess. Dashed outlines indicate internal components in the left and right bays. Only the overall width, overall depth and one inner front-to-back span are labeled.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet width | 59-1/4 | 1505 | Outside horizontal span across the top view. |
| Overall cabinet depth | 21-3/4 | 550 | Outside front-to-back span on the left of the plan. |
| Right internal drawer depth | 16 | 410 | Vertical span inside the right bay between the upper and lower dashed drawer references. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.
Source page 4: Cabinet back view
View original PDF — Source page 4: Cabinet back view
Original drawing: Cabinet back view.
Original source page 4, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The rear elevation has one central rounded rectangular opening and a smaller circular feature below it. The upper horizontal chain locates the rectangular opening. The lower horizontal pair and a vertical dimension locate the circular-feature center; no circular diameter is labeled. Dimensions are as viewed from behind.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall rear width | 59-1/4 | 1505 | Full outside horizontal span above the back elevation. |
| Left edge to rectangular opening | 25 1/4 | 642.5 | Upper left horizontal segment from outside left edge to opening left edge. |
| Rectangular rear opening width | 8-3/4 | 220 | Upper middle horizontal segment across the opening. |
| Rectangular opening to right edge | 25 1/4 | 642.5 | Upper right horizontal segment from opening right edge to outside right edge. |
| Cabinet top to opening top | 7-1/8 | 180 | Upper left vertical chain segment. |
| Rectangular rear opening height | 11-3/4 | 300 | Middle left vertical chain segment across the opening height. |
| Opening bottom to lower foot reference | 14-5/8 | 370 | Lower left vertical chain segment from opening bottom to foot reference. |
| Circular-feature center above lower foot reference | 11-7/8 | 301 | Vertical dimension below the circle to its horizontal centerline. |
| Left edge to circular-feature center | 29-5/8 | 752.5 | Bottom left horizontal segment to the circle centerline. |
| Circular-feature center to right edge | 29-5/8 | 752.5 | Bottom right horizontal segment from the circle centerline. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.
Source page 5: Cabinet side view
View original PDF — Source page 5: Cabinet side view
Original drawing: Cabinet side view.
Original source page 5, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The side elevation shows decorative end posts and feet with internal drawer outlines drawn as dashed lines. Three separate internal drawer-box heights are printed below the upper sink-profile outline. No overall height is labeled on this page.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet depth | 21-3/4 | 550 | Outside horizontal span above the side elevation. |
| Upper dimensioned internal drawer-box height | 4-5/8 | 116 | Vertical span across the highest of the three dimensioned dashed drawer boxes. |
| Middle dimensioned internal drawer-box height | 4-5/8 | 116 | Vertical span across the middle dimensioned dashed drawer box. |
| Lower dimensioned internal drawer-box height | 4-5/8 | 116 | Vertical span across the lowest dimensioned dashed drawer box. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.
Source page 6: 60 inch Straight Mitered Edge countertop overview
View original PDF — Source page 6: 60 inch Straight Mitered Edge countertop overview
Original drawing: 60 inch Straight Mitered Edge countertop overview.
Original source page 6, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective drawing of a long rectangular countertop with a single central rounded rectangular sink opening and one round faucet hole behind it. A flat backsplash runs along the rear; the front and sides have a straight dropped edge. The title reads 60 IN SINGLE SINK 2 IN STRAIGHT MITERED EDGE COUNTERTOP. There are no separate dimension callouts.
No dimension callouts are printed on this overview page.
Source page 7: Straight Mitered Edge countertop dimensions
View original PDF — Source page 7: Straight Mitered Edge countertop dimensions
Original drawing: Straight Mitered Edge countertop dimensions.
Original source page 7, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper views show the backsplash, its side thickness and the countertop front edge. The main plan shows one sink cutout, a centered faucet hole, four sink-bracket points and dashed inner edge references. Two bottom chains distinguish cutout-edge positions from sink-bracket positions; the right vertical chain locates the bracket rows. A separate side section is shown at the right.
The source states that these dimensions apply exclusively to Straight Mitered Edge countertops; Double Cove Edge dimensions are in their separate section. Two leaders identify a 45 Degree Mitered Edge. The corner leader reads 4-R10 without a separate unit on that label.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Backsplash width | 60 | 1524 | Full horizontal span of the upper rectangular backsplash view. |
| Backsplash height | 3-7/8 | 100 | Vertical span at the left of the backsplash. |
| Backsplash thickness | 3/4 | 20 | Horizontal thickness across the small upper-right backsplash side view. |
| Front edge height | 2 | 50 | Vertical span at the left of the long countertop front section. |
| Left front-section return | 3/4 | 20 | Short horizontal span at the left end of the front section. |
| Right front-section return | 3/4 | 20 | Short horizontal span at the right end of the front section. |
| Plan outside width | 60 | 1524 | Full horizontal outside span above the main countertop plan. |
| Left edge to faucet centerline | 30 | 762 | Upper left horizontal segment to the faucet centerline. |
| Faucet centerline to right edge | 30 | 762 | Upper right horizontal segment from the faucet centerline. |
| Plan outside depth | 22 | 560 | Full outside vertical span on the left. |
| Rear edge to sink cutout | 5-1/2 | 140 | Upper segment of the left cutout-depth chain. |
| Sink cutout depth | 12-1/4 | 310 | Middle segment of the left cutout-depth chain. |
| Sink cutout to front edge | 4-3/8 | 110 | Lower segment of the left cutout-depth chain. |
| Rear edge to faucet center | 2-3/4 | 70 | Short vertical span from plan rear edge to the round faucet hole center. |
| Faucet hole diameter | Ø1-3/8 | 35 | Leader pointing to the circular faucet hole. |
| Rear edge to upper bracket row | 6-3/4 | 170 | Upper segment of the vertical chain beside the right sink-bracket points. |
| Bracket row spacing | 9-7/8 | 250 | Middle vertical segment between the upper and lower bracket rows. |
| Lower bracket row to front edge | 5-1/2 | 140 | Lower vertical segment below the lower bracket row. |
| Left edge to sink cutout | 21-3/8 | 542 | First upper-bottom horizontal chain segment to the cutout left edge. |
| Sink cutout width | 17-3/8 | 440 | Middle upper-bottom chain segment across the cutout. |
| Sink cutout to right edge | 21-3/8 | 542 | Last upper-bottom chain segment from cutout right edge to outside edge. |
| Left edge to left bracket column | 19-1/8 | 485 | First lower-bottom chain segment to the left bracket-point column. |
| Bracket column spacing | 21-3/4 | 554 | Middle lower-bottom chain segment between the two bracket columns. |
| Right bracket column to right edge | 19-1/8 | 485 | Last lower-bottom chain segment to the right outside edge. |
| Side-section width | 2 | 50 | Horizontal span above the separate right-side section. |
| Side-section upper return | 3/4 | 20 | Vertical span across the top return of the separate side section. |
| Side-section lower return | 3/4 | 20 | Vertical span across the bottom return of the separate side section. |
| Sink opening corner label 4-R10 | Not printed separately | Not printed separately | Leader at the rounded cutout corner reads 4-R10; no separate unit is printed on this leader. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.
Source page 8: Standard rectangular undermount sink
View original PDF — Source page 8: Standard rectangular undermount sink
Original drawing: Standard rectangular undermount sink.
Original source page 8, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The left view shows a rectangular sink with a hatched outer flange, sloping inner bowl, a round feature and an oval feature, neither separately labeled. The right cut section is drawn with the flange at the bottom and the raised neck at the top. Its printed height reference runs from the flange reference to the top of that neck; no opening diameters are labeled.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Outer sink width | 20-1/8 | 511 | Outside horizontal span above the left sink view. |
| Outer sink depth | 15 | 381 | Outside vertical span to the right of the left view. |
| Inner bowl width | 17-3/4 | 451 | Lower horizontal span between the inner bowl edges. |
| Inner bowl depth | 12-5/8 | 320.6 | Left vertical span between the inner bowl edges. |
| Section height | 7-5/8 | 193.6 | Vertical span beside the right section from flange reference to top of the raised neck. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.
Source page 9: 60 inch Double Cove Edge countertop overview
View original PDF — Source page 9: 60 inch Double Cove Edge countertop overview
Original drawing: 60 inch Double Cove Edge countertop overview.
Original source page 9, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective drawing of a long rectangular countertop with a central rounded rectangular sink opening, one round faucet hole behind it and a rear backsplash. The front and side edges have a stepped decorative Double Cove profile. The title reads 60 IN SINGLE SINK 1.5 IN DOUBLE COVE EDGE COUNTERTOP. There are no separate dimension callouts; the title is retained separately from the detailed edge labels on page 10.
No dimension callouts are printed on this overview page.
Source page 10: Double Cove Edge countertop dimensions
View original PDF — Source page 10: Double Cove Edge countertop dimensions
Original drawing: Double Cove Edge countertop dimensions.
Original source page 10, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper views show the decorative backsplash and countertop front profile. The plan includes a central cutout, one faucet hole, four sink-bracket points and inset edge references. Bottom chains distinguish cutout positions from bracket positions. The right side section labels the full edge thickness. The opening-corner leader points to the lower-left rounded corner.
The source states that these dimensions apply exclusively to Double Cove Edge countertops; Straight Mitered Edge dimensions are in their separate section. The title says 1.5 IN; the profile and side section independently print 1-5/8 inches / 40 mm. Both are preserved without deciding nominal or actual dimensions. The corner label reads 4-R20 with no separate unit.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Backsplash width | 57-7/8 | 1470 | Full horizontal span above the decorative backsplash. |
| Backsplash height | 3-7/8 | 100 | Vertical span at the left of the backsplash. |
| Backsplash thickness | 3/4 | 20 | Horizontal thickness of the small upper-right backsplash side view. |
| Front profile overall height | 1-5/8 | 40 | Vertical outside span at the left of the long front profile. |
| Front profile upper layer height | 3/4 | 20 | Upper of the two stacked short vertical spans at the right of the front profile. |
| Front profile lower layer height | 3/4 | 20 | Lower of the two stacked short vertical spans at the right of the front profile. |
| Plan outside width | 60 | 1524 | Full horizontal outside span above the countertop plan. |
| Left edge to faucet centerline | 30 | 762 | Upper left horizontal segment to the central faucet line. |
| Faucet centerline to right edge | 30 | 762 | Upper right horizontal segment from the central faucet line. |
| Plan outside depth | 22 | 560 | Full outside vertical span on the left. |
| Rear edge to sink cutout | 5-1/2 | 140 | Upper segment of the left cutout-depth chain. |
| Sink cutout depth | 12-1/4 | 310 | Middle segment of the left cutout-depth chain. |
| Sink cutout to front edge | 4-3/8 | 110 | Lower segment of the left cutout-depth chain. |
| Rear edge to faucet center | 2-3/4 | 70 | Short vertical span from rear edge to round faucet hole center. |
| Faucet hole diameter | Ø1-3/8 | 35 | Leader identifying the round faucet hole. |
| Rear edge to upper bracket row | 6-3/4 | 170 | Upper vertical segment beside the right sink-bracket column. |
| Bracket row spacing | 9-7/8 | 250 | Vertical segment between upper and lower bracket rows. |
| Lower bracket row to front edge | 5-1/2 | 140 | Lower vertical segment below the lower bracket row. |
| Left edge to sink cutout | 21-3/8 | 542 | First upper-bottom chain segment from outer left edge to cutout left edge. |
| Sink cutout width | 17-3/8 | 440 | Middle upper-bottom chain segment across the cutout. |
| Sink cutout to right edge | 21-3/8 | 542 | Last upper-bottom chain segment from cutout to outside right edge. |
| Left edge to left bracket column | 19-1/8 | 485 | First lower-bottom chain segment to the left bracket column. |
| Bracket column spacing | 21-3/4 | 554 | Middle lower-bottom chain segment between left and right bracket columns. |
| Right bracket column to right edge | 19-1/8 | 485 | Last lower-bottom chain segment to the right outside edge. |
| Rear inset edge reference | 1 | 25 | Short vertical span at plan upper right between rear outer edge and dashed inset reference. |
| Right inset edge reference | 2 | 50 | Horizontal span at plan lower right from dashed inset line to outside right edge. |
| Front inset edge reference | 2 | 50 | Vertical span at plan lower right from dashed inset line to front outside edge. |
| Side-section overall edge thickness | 1-5/8 | 40 | Horizontal dimension above the separate right-side section. |
| Sink opening corner label 4-R20 | Not printed separately | Not printed separately | Leader at the cutout lower-left corner reads 4-R20; no separate unit is printed on that leader. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.
