ALYS-30.pdf — drawing text version
Technical drawing (ALYS-30.pdf) - text companion
PDF with text descriptions — 4 pages
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of the one-page source ALYS-30.pdf. The source filename identifies this drawing; all printed millimeter and inch values remain separate, without conversion or engineering approval.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.
Source limitations
The source explicitly labels measurements in mm and inch. The two printed values are retained separately and are not replaced with calculated conversions.
The source shows a mirror, cabinet and countertop but does not establish included accessories, current material or finish, a controlling unit, a dimensional tolerance or an approved installation plan.
Cabinet depth, mirror depth, countertop thickness, opening sizes, hole diameters and wall mounting or plumbing locations are not dimensioned. These values are not inferred from the drawing.
Source page 1: Mirror, cabinet front and countertop plan
View original PDF — Source page 1: Mirror, cabinet front and countertop plan
Original drawing: Mirror, cabinet front and countertop plan.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The sheet is arranged vertically in three groups labeled Mirror, Cabinet and Countertop. At the top, a rectangular framed mirror is shown in elevation.
The cabinet front has two tall door fronts above one wide lower front. Fine vertical decorative lines fill the front panels. Paired vertical handles are shown at the center of the doors, with one small round feature on the lower front. The base has a shaped central opening and small foot references.
The lower cabinet callout gives a front-layout reference from the midpoint region toward the right outside base reference. It is not a sink-opening dimension or a drilling pattern.
The countertop plan has one rounded rectangular opening and one small round feature behind it. Only the outside width and depth are dimensioned; no opening size, corner radius, round-feature diameter or round-feature position is dimensioned.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Mirror outside width | 30 | 760 | Horizontal callout above the framed mirror, between its outside left and right edges. |
| Mirror outside height | 32 | 810 | Vertical callout to the right of the mirror, between its outside top and bottom edges. |
| Cabinet front-view overall width | 30 | 750 | Horizontal callout above the cabinet front, between its outside left and right references. This is separate from the countertop width below. |
| Cabinet front-view vertical span | 34 | 875 | Vertical callout to the right of the cabinet, from the upper reference to the bottom/foot reference shown. The sheet does not expressly define cabinet-only versus assembled height with a selected top. |
| Lower right front-layout reference | 15 | 375 | Lower horizontal callout from the vertical reference aligned near the cabinet midpoint to the outside right base reference. |
| Countertop overall width | 30 | 760 | Horizontal callout above the countertop plan, between its outside left and right edges. |
| Countertop overall depth | 22 | 560 | Vertical callout to the right of the countertop plan, between its upper and lower outside edges. |
Source note: Source heading: TECHNICAL DRAWING. Source group labels: Mirror, Cabinet, Countertop. Logo: WILLOW COLLECTIONS. Footer: Solid Wood Construction Bathroom Vanity.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.