Wishlist

ALYS_60D.pdf — drawing text version

Technical drawing (ALYS_60D.pdf) - text companion

PDF with text descriptions — 4 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the one-page source ALYS_60D.pdf. The source filename identifies this drawing; all printed millimeter and inch values remain separate, without conversion or engineering approval.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

The source explicitly labels measurements in mm and inch. The two printed values are retained separately and are not replaced with calculated conversions.

The source shows a mirror group, cabinet and countertop but does not establish included accessories, current material or finish, a controlling unit, a dimensional tolerance or an approved installation plan.

Cabinet depth, mirror depth, countertop thickness, opening sizes, hole diameters and wall mounting or plumbing locations are not dimensioned. These values are not inferred from the drawing.

Source page 1: Mirror group, cabinet front and countertop plan

View original PDF — Source page 1: Mirror group, cabinet front and countertop plan

Original drawing: Mirror group, cabinet front and countertop plan.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The sheet is arranged vertically in three groups showing mirrors, the cabinet and the countertop. Two separate rectangular framed mirror elevations are shown side by side at the top.

The cabinet elevation has a paired-door region on each side, one wide lower front beneath each pair, and three stacked fronts in the center. Fine vertical decorative lines, paired vertical handles and small round handle marks appear on the fronts. A shaped lower base and small foot references are shown.

The cabinet and countertop widths are separately dimensioned. Lower cabinet callouts identify layout references shown in that front view; they are not sink-opening dimensions or a drilling pattern.

The countertop plan has two rounded rectangular openings with a small round feature behind each. A three-part horizontal chain locates the two round-feature axes: 330 mm [13 inch], 860 mm [34 inch], and 330 mm [13 inch]. No opening size, corner radius or round-feature diameter is printed.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Left mirror outside width 28 710 Horizontal callout above this framed mirror, between its outside left and right edges.
Right mirror outside width 28 710 Horizontal callout above this framed mirror, between its outside left and right edges.
Mirror outside height 32 810 Vertical callout to the right of the mirror group, between its outside top and bottom edges. This height is printed once.
Cabinet front-view overall width 59 1510 Horizontal callout above the cabinet elevation, between its outside left and right reference lines. It is separate from the countertop width below.
Cabinet front-view vertical span 34 875 Vertical callout to the right of the cabinet from the upper reference to the bottom/foot reference shown. The sheet does not expressly define cabinet-only versus assembled height with a selected top.
Lower left front-layout reference 30 750 From the outside left base reference to the inner vertical reference near the midpoint of the cabinet.
Lower right front-layout reference 12 313 From the inner vertical reference below the right paired-door region to the outside right base reference.
Countertop overall width 60 1520 Horizontal callout above the countertop plan, between its outside left and right edges.
Countertop overall depth 22 560 Vertical callout to the right of the countertop plan, between the upper and lower outside edges.
Countertop: left edge to left round-feature axis 13 330 Left segment of the horizontal locating chain, from the outside left countertop edge to the left round-feature axis.
Countertop: round-feature axis spacing 34 860 Middle segment of the horizontal locating chain between the left and right round-feature axes.
Countertop: right round-feature axis to right edge 13 330 Right segment of the horizontal locating chain, from the right round-feature axis to the outside right countertop edge.

Source note: Source heading: TECHNICAL DRAWING. Logo: WILLOW COLLECTIONS. Footer: Solid Wood Construction Bathroom Vanity.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.