Wishlist

ALYS-60S.pdf — drawing text version

Technical drawing (ALYS-60S.pdf) - text companion

PDF with text descriptions — 4 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the one-page source ALYS-60S.pdf. The source filename identifies this drawing; all printed millimeter and inch values remain separate, without conversion or engineering approval.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

The source explicitly labels measurements in mm and inch. The two printed values are retained separately and are not replaced with calculated conversions.

The source shows a mirror group, cabinet and countertop but does not establish included accessories, current material or finish, a controlling unit, a dimensional tolerance or an approved installation plan.

Cabinet depth, mirror depth, countertop thickness, opening sizes, hole diameters and wall mounting or plumbing locations are not dimensioned. These values are not inferred from the drawing.

Source page 1: Mirror group, cabinet front and countertop plan

View original PDF — Source page 1: Mirror group, cabinet front and countertop plan

Original drawing: Mirror group, cabinet front and countertop plan.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The sheet is arranged vertically in three groups labeled Mirror, Cabinet and Countertop. One rectangular framed mirror elevation is shown at the top.

The cabinet elevation has two tall central door fronts, one wide lower front beneath them, and three stacked fronts at each side. The fronts carry fine vertical decorative lines, paired vertical handles at the center and small round handle marks elsewhere. A shaped lower base and small foot references are shown.

The cabinet and countertop widths are separately dimensioned. Lower cabinet callouts identify layout references shown in that front view; they are not sink-opening dimensions or a drilling pattern.

The countertop plan has one rounded rectangular opening and a small round feature behind it. The 760 mm [30 inch] span runs from the round-feature axis to the outside right edge. No opening width, opening depth, corner radius or round-feature diameter is printed.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Mirror outside width 58 1470 Horizontal callout above this framed mirror, between its outside left and right edges.
Mirror outside height 32 810 Vertical callout to the right of the mirror group, between its outside top and bottom edges. This height is printed once.
Cabinet front-view overall width 59 1510 Horizontal callout above the cabinet elevation, between its outside left and right reference lines. It is separate from the countertop width below.
Cabinet front-view vertical span 34 865 Vertical callout to the right of the cabinet from the upper reference to the bottom/foot reference shown. The sheet does not expressly define cabinet-only versus assembled height with a selected top.
Lower left front-layout reference 30 753 From the outside left base reference to the inner vertical reference near the midpoint of the cabinet.
Lower right front-layout reference 16 395 From the inner vertical reference aligned near the left boundary of the right front column to the outside right base reference.
Countertop overall width 60 1520 Horizontal callout above the countertop plan, between its outside left and right edges.
Countertop overall depth 22 560 Vertical callout to the right of the countertop plan, between the upper and lower outside edges.
Countertop: central axis to right edge 30 760 Horizontal callout from the round feature axis to the right outside countertop edge.

Source note: Source heading: TECHNICAL DRAWING. Source group labels: Mirror, Cabinet, Countertop. Logo: WILLOW COLLECTIONS. Footer: Solid Wood Construction Bathroom Vanity.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.