Atlanta 30 - drawing text version
Download drawings and text (PDF)
Atlanta 30 source drawing - text companion
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source warnings and unresolved dimensions in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text version of the exact two-page source shared by 30.pdf, Atlanta_Oak_30_spec.pdf and Atlanta_Teak_30_Spec.pdf. The three downloaded files are byte-identical. This transcription does not change the original drawing or establish material, current product fit, engineering approval or installation instructions.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Each source label prints a leading value and a bracketed value. The table reproduces these as Bracketed value and Leading value, with the brackets omitted. No separate unit legend is printed on either page; unit conversions and rounding corrections are not inferred. R is retained where the source marks a radius. Decimal commas and bracketed zeros are preserved.
Source limitations
The source pages are titled Technical Drawing and have a Solid Wood Construction Bathroom Vanity footer. Their generic title does not name a finish; the companion applies to the exact source file, not to an inferred finish or product specification.
On source page 1 the three narrow plan gaps are printed 2 [0]. On source page 2 the two narrow side gaps are printed 2,5 [0]. These source labels are preserved and require confirmation before fabrication or installation.
Side-view labels 437 [17 1/4] and 440 [17 1/4] have separate reference lines and remain separate rows. No numerical correction is made.
Plan narrow-gap labels require confirmation - source page 1
Plan narrow-gap labels require confirmation: Bracketed value: 0; Leading value: 2.
Each of three narrow gaps is labeled with a nonzero leading value and a bracketed zero. The source does not explain the rounding or give a unit legend.
Confirm the intended values and units with Willow Bath and Vanity before fabrication or installation. No correction has been made.
Side narrow-gap labels require confirmation - source page 2
Side narrow-gap labels require confirmation: Bracketed value: 0; Leading value: 2,5.
Each of two narrow gaps is labeled with a nonzero leading value and a bracketed zero. The comma and zero are transcribed without correction.
Confirm the intended values and units with Willow Bath and Vanity before fabrication or installation. No correction has been made.
Source page 1: Plan, notched panel, rear view and back-panel detail
View original PDF — Source page 1: Plan, notched panel, rear view and back-panel detail
Original drawing: Plan, notched panel, rear view and back-panel detail.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper-left drawing is a plan with a rectangular outer envelope, nested frame and panel outlines, and a centered U-shaped notch along its upper edge. The lower edge shows two adjacent front-panel spans and narrow gaps. Multiple horizontal reference widths are labeled separately.
The upper-right drawing isolates a panel with a centered U-shaped notch in its upper edge. The upper left and upper right edges are stepped, and the bottom corners of the notch are rounded. One radius leader is printed.
The lower-left rear view shows a rectangular cabinet on two visible legs, a broad back panel with one centered rounded-rectangle opening, and a low horizontal rail. Dimension chains locate the opening relative to the cabinet edges and the foot baseline.
The lower-right detail isolates the back panel and its centered rounded-rectangle opening. One radius leader points to a lower corner of the opening. These descriptions identify visible shapes; the source does not label their installation purpose.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Leading value | Reference points / meaning |
|---|---|---|---|
| Plan: outer envelope width | 30 | 762 | Full horizontal span between the outermost left and right reference lines. |
| Plan: next inner width | 29 1/4 | 742 | Second of the nested horizontal widths above the plan, between its indicated inner reference lines. |
| Plan: third nested width | 26 1/2 | 672 | Third horizontal width above the plan, measured between the next pair of inner reference lines. |
| Plan: fourth nested width | 25 1/4 | 642 | Lowest of the four nested widths above the plan, between its indicated inner reference lines. |
| Plan: left half-width reference | 15 | 381 | Horizontal span from the left outer reference to the central vertical reference. |
| Plan: central notch width | 5 | 130 | Horizontal span between the two straight sides of the centered U-shaped notch. |
| Plan: internal depth reference | 17 3/4 | 454 | Internal vertical span between the upper and lower horizontal reference lines shown within the plan. |
| Plan: upper internal width | 27 3/4 | 706 | Upper of the three separately labeled horizontal spans drawn through the plan interior. |
| Plan: middle internal width | 26 3/4 | 680 | Middle of the three separately labeled horizontal spans drawn through the plan interior. |
| Plan: lower internal width | 27 | 686 | Lower of the three separately labeled horizontal spans drawn through the plan interior. |
| Plan: overall depth | 22 | 560 | Full vertical span along the left side of the plan. |
| Plan: upper frame span | 2 | 50 | Upper span in the left-side vertical chain. |
| Plan: middle depth span | 17 3/4 | 450 | Middle span in the left-side vertical chain. |
| Plan: lower frame span | 2 | 50 | Lower frame span in the left-side vertical chain. |
| Plan: lower outer offset | 1/2 | 10 | Short span below the lower frame in the left-side vertical chain. |
| Plan: left outer offset | 1/2 | 10 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation. |
| Plan: left frame width | 2 | 50 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation. |
| Plan: left narrow gap | 0 | 2 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation.Source label requires confirmation |
| Plan: left front-panel span | 12 1/2 | 318 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation. |
| Plan: central narrow gap | 0 | 2 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation.Source label requires confirmation |
| Plan: right front-panel span | 12 1/2 | 318 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation. |
| Plan: right narrow gap | 0 | 2 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation.Source label requires confirmation |
| Plan: right frame width | 2 | 50 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation. |
| Plan: right outer offset | 1/2 | 10 | One of the nine separately printed horizontal spans below the plan, ordered from left to right. Printed values are retained without recalculation. |
| Notched panel: overall width | 26 3/4 | 680 | Full horizontal width of the isolated panel. |
| Notched panel: overall depth | 17 3/4 | 454 | Full vertical depth from its uppermost edge to its lower edge. |
| Notched panel: central notch width | 5 | 130 | Horizontal span between the straight sides of the centered notch. |
| Notched panel: central notch depth | 9 | 230 | Vertical span from the uppermost edge to the bottom of the U-shaped notch. |
| Notched panel: upper step height | 1 3/4 | 43 | Short vertical span at the upper-left stepped edge. |
| Notched panel: left step offset | 3/4 | 22 | Short horizontal span at the left stepped edge. |
| Notched panel: notch corner radius | R1 | R25 | Leader points to the lower-left rounded corner of the notch. R is retained as the printed radius prefix. |
| Rear: overall width | 29 1/4 | 742 | Full horizontal span across the cabinet rear. |
| Rear: left opening offset | 10 1/4 | 261 | Upper horizontal chain: from the left outer reference to the left edge of the opening. |
| Rear: opening width | 8 3/4 | 220 | Upper horizontal chain: between the opening left and right edges. |
| Rear: right opening offset | 10 1/4 | 261 | Upper horizontal chain: from the opening right edge to the right outer reference. |
| Rear: upper opening offset | 7 1/4 | 185 | Left vertical chain: from the cabinet upper edge to the opening upper edge. |
| Rear: opening height | 10 3/4 | 270 | Left vertical chain: between the opening upper and lower edges. |
| Rear: lower opening offset | 15 1/2 | 395 | Left vertical chain: from the opening lower edge to the foot baseline. |
| Rear: low rail reference height | 6 3/4 | 172 | Vertical span from the foot baseline to the indicated underside of the low horizontal rail. |
| Back panel: overall width | 26 1/2 | 670 | Full horizontal width of the isolated back panel. |
| Back panel: overall height | 17 1/4 | 438 | Full vertical height of the isolated back panel. |
| Back panel: left opening offset | 8 3/4 | 225 | Upper horizontal chain: from the panel left edge to the opening left edge. |
| Back panel: opening width | 8 3/4 | 220 | Upper horizontal chain: between the opening left and right edges. |
| Back panel: right opening offset | 8 3/4 | 225 | Upper horizontal chain: from the opening right edge to the panel right edge. |
| Back panel: upper opening offset | 2 | 49 | Right vertical chain: from the panel upper edge to the opening upper edge. |
| Back panel: opening height | 10 3/4 | 270 | Right vertical chain: between the opening upper and lower edges. |
| Back panel: opening corner radius | R1 | R25 | Leader points to the opening lower-left rounded corner. R is retained as the printed radius prefix. |
Source note: The sheet title is Technical Drawing. Its footer reads Solid Wood Construction Bathroom Vanity. This wording is transcribed from the source and does not establish the current product material or compatibility.
Source note: All repeated dimensions remain separate rows. Unlabeled dimensions are not derived.
Source page 2: Front and side elevations
View original PDF — Source page 2: Front and side elevations
Original drawing: Front and side elevations.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper drawing is the front elevation. A full-width countertop sits above two tall adjacent front panels with small round knobs. A frame surrounds these panels, and the cabinet stands on two visible legs.
The lower drawing is the side elevation. It shows the countertop above a framed side panel, internal horizontal references, two legs, and a narrow raised strip at the rear of the countertop. The two overall-height labels end at the countertop surface and underside respectively; the raised rear strip extends above those endpoints.
Separate reference spans appear at the rear side of this elevation. The neighboring leading values 437 and 440 both have the bracketed value 17 1/4; they are kept as separate labels rather than combined or corrected.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Leading value | Reference points / meaning |
|---|---|---|---|
| Front: countertop width | 30 | 762 | Full horizontal span across the countertop outer ends. |
| Front: cabinet width | 29 1/4 | 742 | Lower horizontal span between the cabinet outer references. |
| Front: countertop thickness | 2 | 50 | Top span of the right-side vertical chain, between the countertop upper and lower surfaces. |
| Front: upper rail height | 2 | 50 | Next span in the right-side vertical chain, below the countertop. |
| Front: frame opening height | 24 | 610 | Middle span in the right-side vertical chain between the upper and lower frame references. |
| Front: lower rail height | 2 | 50 | Lower frame span in the right-side vertical chain. |
| Front: lower rail to foot baseline | 5 1/2 | 140 | Bottom span in the right-side vertical chain, below the lower rail. |
| Front: front-panel height | 23 3/4 | 605 | Separate vertical span printed at the left, alongside the front panel. It is distinct from the frame opening height. |
| Front: lower internal width | 27 3/4 | 704 | Lower horizontal span between the indicated inner vertical references. |
| Side: countertop depth | 22 | 560 | Full horizontal span across the countertop in the side elevation. |
| Side: height to countertop surface | 35 1/2 | 900 | Outermost left vertical span from the foot baseline to the countertop upper surface. The raised rear strip extends above this endpoint. |
| Side: height to countertop underside | 33 1/2 | 850 | Next left vertical span from the foot baseline to the countertop underside. |
| Side: internal horizontal span | 17 3/4 | 454 | Horizontal span across the side interior between the indicated inner vertical references. |
| Side: lower horizontal span | 21 | 532 | Separate horizontal span below the side panel between the indicated lower references. |
| Side: upper rail height | 2 | 50 | Upper part of the left-side frame chain, immediately below the countertop. |
| Side: upper narrow gap | 0 | 2,5 | Small span at the upper side-panel edge; the comma and bracketed zero are retained exactly.Source label requires confirmation |
| Side: side-panel height | 23 3/4 | 605 | Vertical span alongside the side panel between its indicated upper and lower references. |
| Side: lower narrow gap | 0 | 2,5 | Small span at the lower side-panel edge; the comma and bracketed zero are retained exactly.Source label requires confirmation |
| Side: lower rail height | 2 | 50 | Lower frame span of the left-side chain. |
| Side: lower rail to foot baseline | 5 1/2 | 140 | Bottom span of the left-side chain, below the lower rail. |
| Side: right upper offset | 6 | 150 | Upper span on the right, from the countertop underside to the indicated upper rear-side reference. |
| Side: right outer reference span | 17 1/4 | 437 | Outer of the two neighboring vertical spans at the right-side feature. Kept separate from the adjacent 440 label; the source does not name the feature. |
| Side: right inner reference span | 17 1/4 | 440 | Inner of the two neighboring vertical spans at the right-side feature. Its endpoint lines differ from those of the adjacent 437 label. |
| Side: right lower offset | 4 | 100 | Short lower span on the right, between its indicated rear-side reference and the side-panel lower reference. |
| Side: low horizontal reference height | 6 3/4 | 172 | Vertical span from the foot baseline to the indicated underside of the low horizontal reference. |
| Side: front foot width | 1 1/4 | 30 | Short horizontal span across the visible front foot near the foot baseline. |
Source note: The sheet repeats the Technical Drawing title and Solid Wood Construction Bathroom Vanity footer. No separate unit legend is printed.
Source note: The source does not label the raised rear strip height or specify installation clearances. Those values are not inferred.
Source and assistance
View the original source PDF. Source reviewed 21 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.