Source drawing 60S - drawing text version
Download drawings and text (PDF)
Atlanta 60S source drawing - source drawing text companion
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source warnings and unresolved dimensions in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text version of the 60S drawing, also provided as Atlanta_Oak_60S_Spec.pdf and Atlanta_Teak_60S_Spec.pdf. The drawing itself is generically titled TECHNICAL DRAWING. No material, engineering or current product-fit approval is added.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. The source prints bracketed and unbracketed dimension labels without an explicit unit legend. The two sets are reproduced independently as Bracketed value and Unbracketed value. No unit conversion, controlling unit, rounding correction or installation approval is inferred.
Source limitations
The source footer and logo are reproduced as legacy source labels, not new material or brand claims for current products.
Rear panel detail: circular-feature callout prefix - source page 2
Rear panel detail: circular-feature callout prefix: Bracketed value: ? 2 1/4; Unbracketed value: ? 60.
The source visibly prints a question-mark-like prefix before both values. The intended prefix has not been confirmed.
Willow Bath and Vanity must confirm the intended prefix and circular-feature dimension before it is used for cutting or installation. No correction has been made.
Source page 1: Plan, side drawing and component details
View original PDF — Source page 1: Plan, side drawing and component details
Original drawing: Plan, side drawing and component details.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper plan has two narrow side drawer bays and a broad central compartment. The central panel has a U-shaped opening at its upper edge. Four long upper width references, local internal spans and a separate bottom frame-and-gap chain are shown.
The lower-left side drawing shows a slab and a faucet outline above three internal drawer-box outlines, framing and legs. Front is at the left and rear at the right. The overall-height span reaches the slab top and does not include the faucet. Separate rear reference levels are not presented as approved plumbing cutout locations.
The isolated upper-right drawer detail is rectangular, with an upper longitudinal divider and a transverse divider. The lower-right panel detail is wide and has a central U-shaped opening with rounded bottom corners. No corner-radius value is printed on this separate panel detail.
The heading reads TECHNICAL DRAWING; the logo reads Willow Collections and the footer reads Solid Wood Construction Bathroom Vanity. These are legacy source labels, not new claims about the material or accessories of current products.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Plan: full outside width | 60 | 1524 | Highest full horizontal span across the complete plan envelope. |
| Plan: second full width | 59 1/4 | 1504 | Second long horizontal span between the outside cabinet-side references. |
| Plan: fourth full width | 55 1/4 | 1404 | Lowest of the four long upper spans, between the inner side references indicated. |
| Plan: upper left depth segment | 2 | 50 | Upper short segment of the left vertical depth chain. |
| Plan: middle left depth segment | 17 3/4 | 450 | Long middle segment of the left vertical depth chain. |
| Plan: lower left depth segment | 2 | 50 | Lower short segment of the left vertical depth chain. |
| Plan: lower outside depth offset | 1/2 | 10 | Small vertical offset below the left depth chain, identified by a leader below the plan. |
| Plan: full outside depth | 22 | 560 | Outermost left vertical span across the complete plan envelope. |
| Plan: third full width | 56 1/2 | 1434 | Third long upper span, between the indicated inset side references. |
| Plan: central U-shaped opening width | 5 | 130 | Horizontal span between the two straight sides of the U-shaped opening in the central panel. |
| Plan: central panel inner width | 26 3/4 | 678 | Lower horizontal span across the central panel, between its indicated side references. |
| Plan: left drawer-bay middle span | 13 1/2 | 342 | Horizontal span across the left drawer bay below the upper internal-width label. |
| Plan: upper left partial span | 30 | 762 | Upper horizontal partial span from the outside left edge to the indicated reference near the center of the plan. |
| Plan: right drawer-bay upper span | 13 1/2 | 342 | Upper horizontal span across the right drawer bay, between its indicated outside references. |
| Plan: right drawer outer width | 13 | 330 | Horizontal span across the outer right drawer-box outline below the upper bay span. |
| Plan: bottom left frame span | 2 | 50 | End frame segment of the bottom horizontal chain on the left side. |
| Plan: bottom gap 1 | 0 | 2 | Small gap 1 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Plan: bottom broad span 1 | 13 3/4 | 348 | Broad span 1 counting from left to right in the bottom horizontal frame and front-region chain. |
| Plan: bottom gap 2 | 0 | 2 | Small gap 2 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Plan: bottom broad span 2 | 13 3/4 | 348 | Broad span 2 counting from left to right in the bottom horizontal frame and front-region chain. |
| Plan: bottom gap 3 | 1/4 | 4 | Small gap 3 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Plan: bottom broad span 3 | 13 3/4 | 348 | Broad span 3 counting from left to right in the bottom horizontal frame and front-region chain. |
| Plan: bottom gap 4 | 0 | 2 | Small gap 4 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Plan: bottom broad span 4 | 13 3/4 | 348 | Broad span 4 counting from left to right in the bottom horizontal frame and front-region chain. |
| Plan: bottom gap 5 | 0 | 2 | Small gap 5 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Plan: bottom right frame span | 2 | 50 | End frame segment of the bottom horizontal chain on the right side. |
| Plan: bottom right outside offset | 1/2 | 10 | Small horizontal offset outside the right frame, identified by the outermost right downward leader. |
| Plan: bottom left outside offset | 1/2 | 10 | Small horizontal offset outside the left frame, identified by the outermost left downward leader. |
| Plan: central panel depth | 17 3/4 | 454 | Vertical span inside the central compartment, from its upper panel reference to its lower panel reference. |
| Plan: cross-plan inner span | 57 | 1448 | Long horizontal span across the lower part of the plan between the indicated inner side references. |
| Plan: left drawer internal width | 12 1/4 | 308 | Horizontal span between the inside references near the top of the left drawer-box outline. |
| Plan: right drawer internal width | 12 1/4 | 308 | Horizontal span between the inside references near the top of the right drawer-box outline. |
| Plan: left drawer-bay lower span | 13 1/2 | 342 | Horizontal span across the lower outside references of the left drawer bay. |
| Plan: upper left compartment reference | 14 3/4 | 373 | Horizontal span near the upper edge of the left compartment, from its indicated left reference to the central divider reference. |
| Plan: upper central compartment width | 27 3/4 | 702 | Upper horizontal span across the central compartment's outside references. |
| Side: upper horizontal reference | 17 1/4 | 436,04 | Partial horizontal span above the side drawing, from the upper front reference to the local rearward reference near the faucet outline. It is not the full outside depth. |
| Side: overall height to slab top | 35 1/2 | 900 | Outermost left vertical span from the upper slab surface to the bottom foot level; faucet height is not included. |
| Side: middle internal horizontal span | 17 3/4 | 454 | Horizontal span through the middle drawer region, from the indicated front internal reference to the rear reference. |
| Side: upper rear segment | 6 | 150 | Upper short vertical segment at the rear, from below the slab to the indicated rear reference level. |
| Side: lower leg-area depth reference | 21 | 532 | Lower of the two separate repeated horizontal depth references, shown through the leg area. |
| Side: outer rear middle span | 17 1/4 | 437 | Outer of the two neighboring long rear vertical spans. Its printed value remains separate from the adjacent inner span. |
| Side: height below slab | 33 1/2 | 850 | Second left vertical span, from the underside of the slab to the bottom foot level. |
| Side: upper front-region height | 7 3/4 | 200 | The upper broad segment of the left vertical front chain. |
| Side: middle front-region height | 7 3/4 | 200 | The middle broad segment of the left vertical front chain. |
| Side: lower front-region height | 7 3/4 | 200 | The lower broad segment of the left vertical front chain. |
| Side: bottom front gap | 0 | 2,5 | Small bottom gap in the left front chain, identified by its local leader. |
| Side: second intermediate front gap | 0 | 2,5 | Small second intermediate gap in the left front chain, identified by its local leader. |
| Side: first intermediate front gap | 0 | 2,5 | Small first intermediate gap in the left front chain, identified by its local leader. |
| Side: top front gap | 0 | 2,5 | Small top gap in the left front chain, identified by its local leader. |
| Side: upper front-leg offset | 1 | 28 | Short horizontal span at the upper front leg area. |
| Side: upper front rail height | 2 | 50 | Short upper segment of the left vertical chain below the slab. |
| Side: lower front rail height | 2 | 50 | Short segment of the left vertical chain immediately above the leg region. |
| Side: front-leg reference height | 5 1/2 | 140 | Lowest broad segment of the left vertical chain, below the lower rail. |
| Side: lower rear segment | 4 | 100 | Short lower segment of the rear vertical chain below the long middle references. |
| Side: inner rear middle span | 17 1/4 | 440 | Inner of the two neighboring long rear vertical spans. It is not reconciled with the separate outer value. |
| Side: rail-level depth reference | 21 | 532 | Upper of the two repeated horizontal depth references, shown across the lower rail and leg junction. |
| Side: lower open-height reference | 6 3/4 | 172 | Vertical span from the indicated lower rail reference to the bottom foot level, inside the lower side view. |
| Side: front-foot width reference | 1 1/4 | 30 | Short bottom horizontal span across the front foot references. |
| Side: bottom outside depth | 21 3/4 | 550 | Lowest long horizontal span between the outside front and rear foot references. |
| Side: upper internal drawer-box height | 6 | 150 | Vertical span inside the upper internal drawer-box outline. |
| Side: middle internal drawer-box height | 6 | 150 | Vertical span inside the middle internal drawer-box outline. |
| Side: lower internal drawer-box height | 6 | 150 | Vertical span inside the lower internal drawer-box outline. |
| Drawer detail: upper internal width | 12 1/4 | 308 | Horizontal span across the inside references in the upper portion of the separate drawer detail. |
| Drawer detail: full width | 13 | 330 | Top horizontal span across the outside edges of the separate drawer detail. |
| Drawer detail: lower internal width | 12 1/4 | 308 | Horizontal span across the inside references in the lower portion of the drawer detail. |
| Drawer detail: full length | 15 1/4 | 390 | Right vertical span across the complete separate drawer outline. |
| Drawer detail: upper left internal span | 5 3/4 | 145 | Left half of the split horizontal span inside the upper drawer compartment. |
| Drawer detail: upper right internal span | 5 3/4 | 145 | Right half of the split horizontal span inside the upper drawer compartment. |
| U-shaped panel detail: opening width | 5 | 130 | Horizontal span between the two straight sides of the central U-shaped opening. |
| U-shaped panel detail: full width | 26 3/4 | 678 | Bottom horizontal span across the complete panel outline. |
| U-shaped panel detail: left upper span | 10 3/4 | 274 | Upper horizontal span from the outside left edge to the left side of the U-shaped opening. |
| U-shaped panel detail: right upper span | 10 3/4 | 274 | Upper horizontal span from the right side of the U-shaped opening to the outside right edge. |
| U-shaped panel detail: opening depth | 9 | 230 | Vertical span from the panel top to the bottom of the U-shaped opening. |
| U-shaped panel detail: full height | 17 3/4 | 454 | Outer right vertical span across the complete panel outline. |
Source note: The source has no explicit unit legend. Bracketed and unbracketed values are reproduced independently without asserting units or conversions.
Source note: Decimal-comma values 436,04 and 2,5 are retained as printed. Small gaps paired with bracketed zero are not rounded or corrected.
Source note: The separate rear spans 440 and 437 both show [17 1/4]. They remain distinct, unreconciled reference measurements.
Source note: The height references 900 / [35 1/2] and 850 / [33 1/2] are retained as printed.
Source page 2: Front elevation, rear assembly and rear-panel detail
View original PDF — Source page 2: Front elevation, rear assembly and rear-panel detail
Original drawing: Front elevation, rear assembly and rear-panel detail.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper front elevation shows three stacked drawer fronts on the left, two tall doors in the center and three stacked drawer fronts on the right. Circular hardware marks are shown. The lower structure has outer legs and two intermediate feet.
The lower-left rear assembly has a single central rounded rectangular opening and two lower circular features, one toward each side. A lower rail and legs are shown. The horizontal and vertical chains locate the drawn references; they are not installation approval.
The separate lower-right rear-panel detail repeats one central rectangular opening and two circular features. The slanted callout at the left circular feature has an unresolved question-mark-like prefix. Separate assembly and detail measurements are retained independently.
This page repeats the TECHNICAL DRAWING heading, Willow Collections logo and Solid Wood Construction Bathroom Vanity footer. No finish or current material specification is inferred from them.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Bracketed value | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Front: overall height | 35 1/2 | 900 | Outermost left vertical span from the slab top to the bottom foot level. |
| Front: full slab width | 60 | 1524 | Highest full horizontal span above the front elevation. |
| Front: left slab thickness reference | 2 | 50 | Uppermost short span of the left vertical chain, across the slab. |
| Front: left upper rail height | 2 | 50 | Short span immediately below the slab in the left vertical chain. |
| Front: main front-region height | 24 | 610 | Long middle span of the left vertical chain, between the upper and lower frame references. |
| Front: left lower rail height | 2 | 50 | Short span across the lower rail in the left vertical chain. |
| Front: left leg-height reference | 5 1/2 | 140 | Lowest broad segment of the left vertical chain, below the lower rail. |
| Front: left intermediate foot width | 1 1/4 | 30 | Short bottom horizontal span across the left intermediate foot references. |
| Front: right intermediate foot width | 1 1/4 | 30 | Short bottom horizontal span across the right intermediate foot references. |
| Front: upper right partial span | 30 | 762 | Upper partial horizontal span from the indicated central reference to the right outside slab edge. |
| Front: left drawer-front inside span | 13 1/2 | 343 | Horizontal span across the indicated inside references in the upper left drawer-front region. |
| Front: bottom left frame span | 2 | 50 | End frame segment of the bottom horizontal chain on the left side. |
| Front: bottom gap 1 | 0 | 2 | Small gap 1 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Front: bottom broad span 1 | 13 3/4 | 348 | Broad span 1 counting from left to right in the bottom horizontal front-region chain. |
| Front: bottom gap 2 | 0 | 3 | Small gap 2 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Front: bottom broad span 2 | 13 3/4 | 348 | Broad span 2 counting from left to right in the bottom horizontal front-region chain. |
| Front: bottom gap 3 | 0 | 2 | Small gap 3 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Front: bottom broad span 3 | 13 3/4 | 348 | Broad span 3 counting from left to right in the bottom horizontal front-region chain. |
| Front: bottom gap 4 | 0 | 3 | Small gap 4 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Front: bottom broad span 4 | 13 3/4 | 348 | Broad span 4 counting from left to right in the bottom horizontal front-region chain. |
| Front: bottom gap 5 | 0 | 2 | Small gap 5 counting from left to right in the bottom horizontal chain, identified by a downward leader. |
| Front: bottom right frame span | 2 | 50 | End frame segment of the bottom horizontal chain on the right side. |
| Front: right slab thickness reference | 2 | 50 | Uppermost short span of the right vertical chain, across the slab. |
| Front: right upper rail height | 2 | 50 | Short span immediately below the slab in the right vertical chain. |
| Front: top drawer-front gap | 0 | 2,5 | Small top gap in the right vertical drawer-front chain, identified by an angled leader. |
| Front: upper drawer-front height | 7 3/4 | 200 | The upper broad span of the right vertical drawer-front chain. |
| Front: first intermediate drawer-front gap | 0 | 2,5 | Small first intermediate gap in the right vertical drawer-front chain, identified by an angled leader. |
| Front: middle drawer-front height | 7 3/4 | 200 | The middle broad span of the right vertical drawer-front chain. |
| Front: second intermediate drawer-front gap | 0 | 2,5 | Small second intermediate gap in the right vertical drawer-front chain, identified by an angled leader. |
| Front: lower drawer-front height | 7 3/4 | 200 | The lower broad span of the right vertical drawer-front chain. |
| Front: bottom drawer-front gap | 0 | 2,5 | Small bottom gap in the right vertical drawer-front chain, identified by an angled leader. |
| Front: right lower rail height | 2 | 50 | Short span across the lower rail in the right vertical chain. |
| Front: right leg-height reference | 5 1/2 | 140 | Lowest broad span of the right vertical chain, below the lower rail. |
| Front: lower cross-assembly span | 57 3/4 | 1466 | Long horizontal span beneath the front regions, between the indicated lower side and leg references. |
| Rear assembly: upper left span | 25 1/4 | 642 | Left segment of the upper horizontal chain, from the outer left edge to the central rectangular-opening reference. |
| Rear assembly: rectangular-opening width reference | 8 3/4 | 220 | Middle segment of the upper horizontal chain, aligned with the sides of the central rectangular opening. |
| Rear assembly: upper right span | 25 1/4 | 642 | Right segment of the upper horizontal chain, from the central opening reference to the outside right edge. |
| Rear assembly: upper vertical reference | 7 1/4 | 185 | Upper left vertical segment, from the rear-assembly top to the upper opening reference. |
| Rear assembly: middle vertical reference | 10 3/4 | 270 | Middle left vertical segment, between the upper and lower rectangular-opening references. |
| Rear assembly: lower vertical reference | 15 1/2 | 395 | Lower left vertical segment, from the lower opening reference to the bottom foot level. |
| Rear assembly: left circular-feature horizontal reference | 9 | 226 | Horizontal span from the outside left edge to the reference through the left circular feature. |
| Rear assembly: full width | 59 1/4 | 1504 | Highest full horizontal span across the rear assembly's outside references. |
| Rear assembly: lower open-height reference | 6 3/4 | 172 | Short vertical span from the indicated lower rail reference to the bottom foot level. |
| Rear assembly: left circular-feature lower offset | 2 1/2 | 62 | Short vertical span from the left circular-feature reference to the lower rear-panel edge. |
| Rear assembly: left circular-feature height reference | 13 1/4 | 337 | Vertical span from the left circular-feature reference down to the bottom foot level. |
| Rear assembly: right circular-feature lower offset | 2 1/2 | 62 | Short vertical span from the right circular-feature reference to the lower rear-panel edge. |
| Rear assembly: right circular-feature horizontal reference | 9 | 226 | Horizontal span from the reference through the right circular feature to the outside right edge. |
| Rear panel detail: full width | 56 1/2 | 1432 | Highest full horizontal span over the separate rear-panel detail. |
| Rear panel detail: unresolved circular-feature callout | ? 2 1/4 | ? 60 | Slanted leader through the left circular feature. The source prefix is rendered as a question mark and is not replaced with a diameter symbol. |
| Rear panel detail: upper left span | 23 3/4 | 606 | Left segment of the upper horizontal chain, from the outside left edge to the central rectangular-opening reference. |
| Rear panel detail: rectangular-opening width | 8 3/4 | 220 | Middle segment of the upper horizontal chain, across the central rectangular-opening references. |
| Rear panel detail: upper right span | 23 3/4 | 606 | Right segment of the upper horizontal chain, from the central opening reference to the outside right edge. |
| Rear panel detail: full height | 17 1/4 | 438 | Outer right vertical span across the complete panel outline. |
| Rear panel detail: upper opening offset | 2 | 49 | Short upper segment of the right vertical chain, from the panel top to the rectangular opening top. |
| Rear panel detail: rectangular-opening height | 10 3/4 | 270 | Middle right vertical span between the upper and lower rectangular-opening references. |
| Rear panel detail: circular-feature lower offset | 2 1/2 | 63 | Lowest short vertical span at the right, from the circular-feature reference to the panel lower edge. |
| Rear panel detail: lower left end span | 7 1/2 | 191 | Left segment of the bottom horizontal chain, from the outside left edge to the left circular-feature reference. |
| Rear panel detail: span between circular features | 41 1/4 | 1050 | Middle segment of the bottom horizontal chain, between the two circular-feature references. |
| Rear panel detail: lower right end span | 7 1/2 | 191 | Right segment of the bottom horizontal chain, from the right circular-feature reference to the outside right edge. |
Source note: No explicit unit legend, controlling unit or dimensional tolerance is printed.
Source note: The circular-feature callout reads ? 60 / [? 2 1/4]. Its intended prefix is unresolved; it is not an established drilling diameter.
Source note: Assembly circular-feature lower offsets show 62 / [2 1/2], while the separate panel detail shows 63 / [2 1/2]. They remain separate source references.
Source note: The source prints 2 and 3 paired with [0] and decimal-comma 2,5 paired with [0] for small gaps. All occurrences are retained.
Source and assistance
View the original source PDF. Source reviewed 20 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.