Wishlist

Boston 36 left offset vanity - drawing text version

Boston 36 left offset vanity - source drawing text version

PDF with text descriptions — 23 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of all ten source pages, retaining printed cabinet, countertop and sink dimensions and their individual reference points. No engineering approval, included accessory or unlabelled dimension is inferred.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

Printed inches and millimeters remain independent source labels. This text does not establish controlling units, a current production revision, included accessories or approved installation dimensions.

The top plan labels cabinet depth 21-5/8 inches /550 mm, while the side labels its upper depth 21-3/4 inches /550 mm. Both remain as printed. The side lower base depth 21-1/4 inches /540 mm uses a different outline.

The source front leader says Double Drawer with Power Station and Organizer. This source annotation alone does not confirm the accessories supplied with a purchased configuration.

Straight Mitered Edge and Double Cove Edge refer to separate countertop styles. The Double Cove title 1.5 IN and detailed 1-5/8 inches /40 mm edge references remain distinct; no nominal-versus-actual ruling is made.

Source page 1: Cabinet overview

View original PDF — Source page 1: Cabinet overview

Original drawing: Cabinet overview.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective view of an open-top cabinet with a broad paired-door bay on the left, one broad lower drawer front beneath those doors, and four narrow stacked fronts on the right. The doors and fronts have framed inset panels and small hardware-hole marks. A narrow drawer box is visible at the upper right inside the open frame; the rear panel has an opening. The base has shaped cutouts and small feet. No countertop or sink is drawn and no separate dimensions appear on this cover.

No dimension callouts are printed on this overview page.

Source note: The source title reads BOSTON 36 IN SINGLE LEFT OFFSET SINK BATHROOM VANITY. The Willow Bath and Vanity logo and the contact line willowbathandvanity.com, info@willowbathandvanity.com, 1-877-788-8444 appear on the cover.

Back to contents

Source page 2: Cabinet front elevation

View original PDF — Source page 2: Cabinet front elevation

Original drawing: Cabinet front elevation.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Front elevation with a broad paired-door bay at left, a broad lower front beneath it, and four narrow stacked fronts at right. The source leader labelled Double Drawer with Power Station and Organizer ends on the horizontal reference between the third and fourth narrow fronts. The label is transcribed as a source annotation; the drawing alone does not establish accessories supplied with a purchased configuration. Separate dimensions mark top-cap and base widths, vertical front references and hardware-hole spacing.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall top width 35-1/4 894 Full horizontal span between the outside edges of the top cap above the front elevation.
Paired-door span 19-7/8 506 Upper left span across the paired-door bay, between its shown outside front references.
Narrow front span 8-7/8 226 Upper right span across the narrow front column.
Overall cabinet height 34 865 Full outside vertical reference at the left, from the top cap to the lower base reference; the small feet are not included beyond that drawn reference.
Paired-door height 21 534 Vertical span beside the left paired-door bay, from its upper to lower door references.
Broad lower front height 6-1/2 166 Vertical span beside the broad lower front beneath the left doors.
Base vertical reference 3-3/8 86 Lowest short vertical reference beside the shaped base, with the small foot protrusion not included.
Base width 34-3/8 874 Horizontal outside span below the base, distinct from the 894 mm top-cap width.
Door hardware-hole spacing 5 128 Vertical span between two marked hardware-hole centers on the right door of the paired bay.
Broad lower-front hardware-hole spacing 5 128 Horizontal span between the two marked hardware-hole centers on the broad lower front.
Upper narrow-front hardware-hole spacing 3-3/4 96 Horizontal span between two marked hardware-hole centers on the upper right narrow front.
Internal lower reference in door bay 7-7/8 200 Vertical span from the lower dashed horizontal internal reference to the bottom door reference; no unlabelled component dimension is inferred.
Upper narrow-front height 6-1/2 166 First vertical front-height span beside the right column.
Second narrow-front height 6-1/2 166 Second vertical front-height span beside the right column.
Third narrow-front height 6-1/2 166 Third vertical front-height span beside the right column.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 3: Cabinet top plan

View original PDF — Source page 3: Cabinet top plan

Original drawing: Cabinet top plan.

Original source page 3, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Rectangular top frame with a narrow drawer box at right and a broad bay at left; dashed lines show internal or obscured references. Only overall width, outside depth and the shown drawer depth are dimensioned.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 3 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall width 35-1/4 894 Full outside horizontal span above the plan.
Outside depth 21-5/8 550 Full outside vertical span at the left of the plan.
Drawer depth reference 16 410 Vertical span through the narrow right drawer box between the shown rear and front reference lines.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 4: Cabinet rear elevation

View original PDF — Source page 4: Cabinet rear elevation

Original drawing: Cabinet rear elevation.

Original source page 4, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Rear elevation has a large rear panel with a rounded rectangular opening at right and a round opening lower at left. Upper horizontal and right vertical chains locate the rectangular opening. Separate bottom horizontal and side vertical references locate the round opening center. The round opening diameter is not labelled. Top and lower horizontal references terminate at different cabinet outlines.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 4 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall top width 35-1/4 894 Full horizontal span above the rear top cap.
Left outside to rectangular opening 19-1/4 490 Upper left segment from the outer top left reference to the opening left edge.
Rectangular opening width 8-5/8 220 Upper middle span across the opening.
Rectangular opening to right outside 7-1/4 184 Upper right segment from the opening right edge to the outer top right reference.
Top to rectangular opening 7-5/8 193 Upper right vertical segment from the cap top reference to the rectangular opening top.
Rectangular opening height 11-3/4 300 Middle right vertical span across the rectangular opening.
Opening bottom to base 14-5/8 372 Lower right vertical segment from the rectangular opening bottom to the lower base reference.
Round-opening center height 10-5/8 270 Vertical span at left from the lower base reference to the round-opening centerline.
Left base edge to round-opening center 6-7/8 175 Lower left horizontal segment from the outer base reference to the round opening centerline.
Round-opening center to right base edge 27-1/2 699 Lower right horizontal segment from the round opening centerline to the outer base reference.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 5: Cabinet side elevation

View original PDF — Source page 5: Cabinet side elevation

Original drawing: Cabinet side elevation.

Original source page 5, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Side elevation with front faces at the right, a shaped base and dashed drawer-box outlines. Upper outside depth and lower base depth use different outlines. Separate vertical labels mark the upper, middle and lower drawer reference spans.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 5 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Upper outside depth 21-3/4 550 Horizontal outside span over the top cap, retained separately from the top-plan inch label.
Upper drawer height reference 3-3/4 96 Vertical span between the shown upper drawer-box reference lines.
Middle drawer height reference 3-3/4 96 Vertical span between the shown middle drawer-box reference lines.
Lower drawer height reference 9-1/2 240 Vertical span between the upper and lower lines of the lower dashed drawer-box reference.
Lower base depth 21-1/4 540 Horizontal outside span below the shaped base, distinct from the upper cap depth.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 6: 36 IN left offset 2 IN Straight Mitered Edge countertop overview

View original PDF — Source page 6: 36 IN left offset 2 IN Straight Mitered Edge countertop overview

Original drawing: 36 IN left offset 2 IN Straight Mitered Edge countertop overview.

Original source page 6, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective of a rectangular countertop with a straight deep front edge, one sink opening offset to the left, one faucet hole behind the opening and a full rear backsplash. The title identifies 2 IN Straight Mitered Edge; no dimension-line callouts occur on this page.

No dimension callouts are printed on this overview page.

Back to contents

Source page 7: Straight Mitered Edge countertop dimensions

View original PDF — Source page 7: Straight Mitered Edge countertop dimensions

Original drawing: Straight Mitered Edge countertop dimensions.

Original source page 7, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Separate backsplash elevation and side profile are followed by a horizontal edge elevation and a top plan with one left-offset opening. One faucet hole lies behind the opening; four small bracket holes sit outside it. A separate narrow edge section is at the right. Horizontal chains separately locate the opening and bracket columns; vertical chains separately locate the opening and bracket rows.

Two leaders state 45 Degree Mitered Edge, at the edge elevation and lower right plan corner. SINK BRACKET points to a small mounting-hole symbol. The source says these dimensions apply exclusively to Straight Mitered Edge countertops and refers other styles to Double Cove Edge dimensions.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 7 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 36 914 Full horizontal span of the separate backsplash elevation.
Backsplash height 3-7/8 100 Vertical height of the backsplash elevation.
Backsplash side thickness 3/4 20 Thickness of the narrow side profile at upper right.
Mitered edge overall height 2 50 Vertical height of the horizontal edge elevation.
Mitered edge left return 3/4 20 Short horizontal span at the left end of the edge elevation.
Mitered edge right return 3/4 20 Short horizontal span at the right end of the edge elevation.
Top plan: outside width 36 914 Full horizontal span of the countertop outline.
Top plan: left edge to faucet axis 12 304 Left upper segment from outer left edge to faucet and sink axis.
Top plan: faucet axis to right edge 24 610 Right upper segment from faucet and sink axis to outer right edge.
Top plan: outside depth 22 560 Full vertical front-to-back span of the countertop plan.
Top plan: rear edge to opening 5-1/2 140 Upper left chain from rear outside edge to rear side of the sink opening.
Top plan: opening depth 12-1/4 310 Middle left chain across the sink opening front-to-back.
Top plan: opening to front edge 4-3/8 110 Lower left chain from opening front edge to outside front edge.
Top plan: rear edge to faucet center 2-3/4 70 Short vertical dimension from rear outside edge to faucet-hole center.
Top plan: faucet-hole diameter 1-3/8 35 Diameter callout at the single round faucet hole.
Top plan: rear edge to bracket row 6-3/4 170 Upper internal vertical span from rear edge to rear bracket-hole row.
Top plan: bracket row spacing 9-7/8 250 Vertical spacing between the rear and front bracket-hole rows.
Top plan: bracket row to front edge 5-1/2 140 Lower internal vertical span from front bracket-hole row to outside front edge.
Top plan: left edge to opening 3-1/4 84 Left segment of the horizontal opening chain.
Top plan: opening width 17-3/8 440 Middle horizontal span across the sink opening.
Top plan: opening to right edge 15-3/8 390 Right segment from opening right edge to outside right edge.
Top plan: left edge to bracket column 1-1/8 27 Left segment of the lowest chain to the left bracket-column reference.
Top plan: bracket-column spacing 21-3/4 554 Lowest-chain middle span between left and right bracket columns.
Top plan: bracket column to right edge 13-1/8 333 Lowest-chain right span from right bracket column to outside right edge.
Separate edge section transverse span 2 50 Horizontal span above the narrow edge section to the right of the plan.
Separate edge section upper wall 3/4 20 Short upper vertical span on the separate edge section.
Separate edge section lower wall 3/4 20 Short lower vertical span on the separate edge section.
Sink opening corner label4-R10 Not printed separately Not printed separately The rounded opening-corner leader reads 4-R 10; no separate unit printed on this leader.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source page 8: Printed Page 8: Standard rectangular undermount sink

View original PDF — Source page 8: Printed Page 8: Standard rectangular undermount sink

Original drawing: Printed Page 8: Standard rectangular undermount sink.

Original source page 8, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The left drawing is a plan/section of a rectangular sink with a hatched surrounding flange and a sloped basin. A round opening is drawn near the rear inner area and a small oval feature near the front. The right drawing is a hatched side section with a curved bowl profile and a projecting flange. These features are illustrated without separate opening diameters. The five dimension callouts are reproduced below.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 8 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Sink: outside width 20-1/8 511 Full horizontal width across the outside sink/flange outline.
Sink: outside depth 15 381 Outer vertical depth across the sink/flange outline.
Sink: inner width 17-3/4 451 Horizontal span below the plan across the inside basin reference lines.
Sink: inner depth 12-5/8 320.6 Vertical span at the left across the inside basin reference lines.
Sink side section: vertical height 7-5/8 193.6 Vertical span from the flange/bottom reference to the uppermost section reference shown; no drain fitting dimensions are printed.

Source note: The source says: All measurements are plus or minus 1/4 inch. This stated tolerance is retained as source information, not used to resolve conflicting unit labels.

Back to contents

Source page 9: 36 IN left offset 1.5 IN Double Cove Edge countertop overview

View original PDF — Source page 9: 36 IN left offset 1.5 IN Double Cove Edge countertop overview

Original drawing: 36 IN left offset 1.5 IN Double Cove Edge countertop overview.

Original source page 9, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective of a molded countertop with one opening offset to the left, a faucet hole behind it, a layered front and side edge and a molded rear backsplash. The title uses 1.5 IN Double Cove Edge; no dimension-line callouts occur on this overview.

No dimension callouts are printed on this overview page.

Back to contents

Source page 10: Double Cove Edge countertop dimensions

View original PDF — Source page 10: Double Cove Edge countertop dimensions

Original drawing: Double Cove Edge countertop dimensions.

Original source page 10, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The upper drawings show a molded backsplash in elevation and side profile, followed by a layered edge elevation. Below is a plan with one left-offset sink opening, faucet hole, four bracket holes and a separate narrow edge section. The opening front-edge setback is 4-3/8 in/110 mm, distinct from the rear bracket setback 6-3/4 in/170 mm.

The source says these dimensions apply exclusively to Double Cove Edge countertops. The style title says 1.5 IN, while the detailed edge height is 1-5/8 in/40 mm. These remain separately printed values; no nominal/actual conclusion or correction is inferred.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 10 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 33-7/8 860 Full horizontal span across the molded backsplash elevation.
Backsplash height 3-7/8 100 Vertical height of the backsplash elevation.
Backsplash side thickness 3/4 20 Thickness of the narrow backsplash side profile.
Cove edge overall height 1-5/8 40 Full vertical height of the cove-edge elevation; title separately says 1.5 IN.
Cove edge upper segment 3/4 20 Upper short vertical segment at right of edge elevation.
Cove edge lower segment 3/4 20 Lower short vertical segment at right of edge elevation.
Top plan: outside width 36 914 Full horizontal span of the countertop outline.
Top plan: left edge to faucet axis 12 304 Left upper segment from outer left edge to faucet and sink axis.
Top plan: faucet axis to right edge 24 610 Right upper segment from faucet and sink axis to outer right edge.
Top plan: outside depth 22 560 Full vertical front-to-back span of the countertop plan.
Top plan: rear edge to opening 5-1/2 140 Upper left chain from rear outside edge to rear side of the sink opening.
Top plan: opening depth 12-1/4 310 Middle left chain across the sink opening front-to-back.
Top plan: opening to front edge 4-3/8 110 Lower left chain from opening front edge to outside front edge.
Top plan: rear edge to faucet center 2-3/4 70 Short vertical dimension from rear outside edge to faucet-hole center.
Top plan: faucet-hole diameter 1-3/8 35 Diameter callout at the single round faucet hole.
Top plan: rear edge to bracket row 6-3/4 170 Upper internal vertical span from rear edge to rear bracket-hole row.
Top plan: bracket row spacing 9-7/8 250 Vertical spacing between the rear and front bracket-hole rows.
Top plan: bracket row to front edge 5-1/2 140 Lower internal vertical span from front bracket-hole row to outside front edge.
Top plan: left edge to opening 3-1/4 84 Left segment of the horizontal opening chain.
Top plan: opening width 17-3/8 440 Middle horizontal span across the sink opening.
Top plan: opening to right edge 15-3/8 390 Right segment from opening right edge to outside right edge.
Top plan: left edge to bracket column 1-1/8 27 Left segment of the lowest chain to the left bracket-column reference.
Top plan: bracket-column spacing 21-3/4 554 Lowest-chain middle span between left and right bracket columns.
Top plan: bracket column to right edge 13-1/8 333 Lowest-chain right span from right bracket column to outside right edge.
Top plan rear inset 1 25 Short vertical span from rear edge to rear dashed inset reference.
Top plan right inset band 2 50 Short horizontal span across the inset band on the right of the plan.
Top plan front inset band 2 50 Short vertical span across the front inset band.
Separate edge section transverse span 1-5/8 40 Horizontal span above the separate narrow edge section.
Sink opening corner label4-R20 Not printed separately Not printed separately The rounded opening-corner leader reads 4-R 20; no separate unit printed on this leader.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.