Cambridge 36 right offset vanity - drawing text version
Cambridge 36 right offset vanity - source drawing text version
PDF with text descriptions — 23 pages.
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of all ten source pages. Original dimensions and geometry are reproduced without conversion, interpolation or engineering approval. Cabinet, sink and two countertop-edge options remain distinct.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.
Source limitations
Printed inches and millimeters are retained independently. This text does not establish the controlling unit, current production revision, included accessories or approved installation dimensions.
The cabinet top view labels its depth 21-5/8 in/550 mm; the side view labels 21-3/4 in/550 mm. The distinct source labels are retained without resolving their intended relationship.
The source uses 1.5 IN as the Double Cove style title but 1-5/8 in/40 mm at the detailed edge. Do not interchange dimensions between countertop styles.
Source page 1: Cambridge 36 right offset cabinet overview
View original PDF — Source page 1: Cambridge 36 right offset cabinet overview
Original drawing: Cambridge 36 right offset cabinet overview.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective drawing of an open-top freestanding cabinet with paired doors and a broad upper front on the right, and a narrow stacked drawer-front column on the left. Frame, corner legs, internal divider and drawer box are visible. No countertop is shown on this overview. The title identifies the 36 IN single right offset sink bathroom vanity; no dimension callouts occur here.
Source branding: Willow Bath and Vanity. Contact footer: willowbathandvanity.com; info@willowbathandvanity.com;1-877-788-8444.
No dimension callouts are printed on this overview page.
Source page 2: Cabinet front view
View original PDF — Source page 2: Cabinet front view
Original drawing: Cabinet front view.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The wide door bay is on the right; the narrow drawer column is on the left. The source marks the lower double-front region in the narrow column with the leader Double Drawer with Power Station and Organizer. This label describes the source; it does not establish included accessories for an order. All repeated front dimensions are listed separately.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet width | 35-1/4 | 894 | Outside left edge to outside right edge across the front elevation. |
| Overall cabinet height | 33-1/2 | 850 | Top of the cabinet to the lower foot reference; no countertop is shown in this elevation. |
| Wide front bay width | 20-3/4 | 526 | Horizontal width of the right wide front bay between its inner frame boundaries. |
| Narrow drawer bay width | 9-7/8 | 250 | Horizontal width of the left narrow drawer bay between its inner frame boundaries. |
| Wide bay upper front height | 6-5/8 | 168 | Vertical band above the paired doors on the right side. |
| Paired door region height | 20 | 508 | Vertical span from the bottom of the wide upper front to the bottom of the paired doors. |
| Shelf reference above door bottom | 9-7/8 | 250 | Vertical distance from the lower door reference to the dashed internal shelf line. |
| Foot / bottom-rail clearance | 3-7/8 | 98 | Vertical distance from the foot baseline to the underside of the bottom rail. |
| Narrow bay upper front height | 6-5/8 | 168 | Top band of the narrow drawer-front column on the left side. |
| Narrow bay middle front height | 6-5/8 | 168 | Next band directly below the upper front in the narrow column. |
| Narrow bay lower double-front region | 13-1/4 | 338 | Combined lower region in the narrow column; a leader labels Double Drawer with Power Station and Organizer. |
Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.
Source page 3: Cabinet top view
View original PDF — Source page 3: Cabinet top view
Original drawing: Cabinet top view.
Original source page 3, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The outer rectangular plan shows perimeter framing, corner reinforcements and a divider separating the broad right cavity from the narrow left drawer bay. The 16-inch callout is inside that drawer bay, not the overall cabinet depth.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet width | 35-1/4 | 894 | Outside left-to-right span of the top-view cabinet outline. |
| Overall cabinet depth | 21-5/8 | 550 | Outside front-to-back span of the cabinet plan. |
| Narrow drawer internal depth | 16 | 410 | Front-to-back span of the inner drawer box drawn in the left compartment. |
Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.
Source page 4: Cabinet back view
View original PDF — Source page 4: Cabinet back view
Original drawing: Cabinet back view.
Original source page 4, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Rear elevation with one rounded rectangular plumbing opening offset horizontally. Read left and right as viewed from behind, not as the front-view drawer positions. The three-part horizontal chain locates the opening; the vertical chain locates its top and bottom relative to the top cabinet and lower foot references.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall rear width | 35-1/4 | 894 | Outside left-to-right width across the rear elevation. |
| Rear left edge to opening | 7-1/4 | 184 | Horizontal segment from the left exterior edge to the left side of the rear plumbing opening, as viewed from behind. |
| Rear opening width | 8-5/8 | 220 | Horizontal width of the rounded rectangular plumbing opening. |
| Rear opening to right edge | 19-1/4 | 490 | Horizontal segment from the opening right side to the right exterior edge, as viewed from behind. |
| Rear top edge to opening | 6-1/2 | 165 | Vertical segment from the upper cabinet reference to the top of the plumbing opening. |
| Rear opening height | 10-5/8 | 270 | Vertical height of the rectangular plumbing opening. |
| Rear opening bottom to foot reference | 16-3/8 | 415 | Vertical span from the lower opening edge to the lower foot reference. |
Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.
Source page 5: Cabinet side view
View original PDF — Source page 5: Cabinet side view
Original drawing: Cabinet side view.
Original source page 5, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Side elevation shows the exterior leg/frame outline and three dashed drawer-box sections. Their indicated heights are separate from the front-panel bands. The source prints 21-3/4 in/550 mm here and 21-5/8 in/550 mm on its top view; both are transcribed independently without reconciliation.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet depth | 21-3/4 | 550 | Outer front-to-back span in the side elevation. The top view separately prints 21-5/8 with 550 mm; both source labels are retained. |
| Upper drawer-box height | 3-3/4 | 96 | Height of the upper dashed drawer-box section. |
| Middle drawer-box height | 3-3/4 | 96 | Height of the next dashed drawer-box section below it. |
| Lower drawer-box height | 9-1/2 | 240 | Height of the lower dashed drawer-box section. |
Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.
Source page 6: 36 IN right offset 2 IN Straight Mitered Edge countertop overview
View original PDF — Source page 6: 36 IN right offset 2 IN Straight Mitered Edge countertop overview
Original drawing: 36 IN right offset 2 IN Straight Mitered Edge countertop overview.
Original source page 6, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective of a rectangular countertop with a straight deep front edge, one sink opening offset to the right, one faucet hole behind the opening and a full rear backsplash. The title identifies 2 IN Straight Mitered Edge; no dimension-line callouts occur on this page.
No dimension callouts are printed on this overview page.
Source page 7: Straight Mitered Edge countertop dimensions
View original PDF — Source page 7: Straight Mitered Edge countertop dimensions
Original drawing: Straight Mitered Edge countertop dimensions.
Original source page 7, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The top group is a separate backsplash front elevation and narrow side profile. A horizontal edge elevation is below it. The lower group is the countertop plan with a right offset opening, faucet hole and four small bracket holes. A separate narrow edge section appears at the right.
Two leaders read 45 Degree Mitered Edge: one at the horizontal edge elevation and one at the lower right countertop corner. The SINK BRACKET leader identifies small mounting-hole symbols, not the opening itself. Opening positions and bracket-hole positions have separate horizontal and vertical chains. The source states these dimensions apply exclusively to Straight Mitered Edge countertops; Double Cove Edge is a separate section.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Backsplash width | 36 | 914 | Horizontal span of the separate rectangular backsplash elevation. |
| Backsplash height | 3-7/8 | 100 | Vertical span of the backsplash elevation. |
| Backsplash thickness | 3/4 | 20 | Horizontal thickness of the narrow backsplash side profile. |
| Mitered edge overall height | 2 | 50 | Vertical overall height of the horizontal edge elevation. |
| Mitered edge left wall width | 3/4 | 20 | Short horizontal span of the left return in the edge elevation. |
| Mitered edge right wall width | 3/4 | 20 | Short horizontal span of the right return in the edge elevation. |
| Top plan: outside width | 36 | 914 | Full horizontal width of the countertop plan. |
| Top plan: left edge to faucet axis | 24 | 610 | Upper split dimension from the left outside edge to the faucet and sink axis. |
| Top plan: faucet axis to right edge | 12 | 304 | Upper split dimension from the faucet and sink axis to the right outside edge. |
| Top plan: outside depth | 22 | 560 | Full front-to-back span of the countertop. |
| Top plan: rear edge to opening | 5-1/2 | 140 | Vertical segment from the outside rear edge to the rear edge of the sink opening. |
| Top plan: opening depth | 12-1/4 | 310 | Front-to-back span across the sink opening. |
| Top plan: opening to front edge | 4-3/8 | 110 | Vertical segment from the opening front edge to the outside front edge. |
| Top plan: rear edge to faucet center | 2-3/4 | 70 | Short vertical span from the rear edge to the round faucet-hole center. |
| Top plan: faucet-hole diameter | 1-3/8 | 35 | Diameter leader at the single round faucet hole. |
| Top plan: rear edge to rear bracket row | 6-3/4 | 170 | Internal vertical span from the rear outside edge to the rear bracket-hole row. |
| Top plan: bracket row spacing | 9-7/8 | 250 | Vertical distance between rear and front bracket-hole rows. |
| Top plan: front bracket row to front edge | 5-1/2 | 140 | Vertical span from the front bracket row to the front outside edge. |
| Top plan: left edge to opening | 15-3/8 | 390 | Left segment of the bottom opening chain, from the outside edge to the left side of the opening. |
| Top plan: opening width | 17-3/8 | 440 | Horizontal span across the sink opening. |
| Top plan: opening to right edge | 3-1/4 | 84 | Right segment from the opening right edge to the countertop right outside edge. |
| Top plan: left edge to bracket column | 13-1/8 | 333 | Left segment of the lowest horizontal chain to the left bracket column. |
| Top plan: bracket-column spacing | 21-3/4 | 554 | Horizontal separation of the two bracket-column references. |
| Top plan: bracket column to right edge | 1-1/8 | 27 | Right segment of the lowest horizontal chain to the outside right edge. |
| Separate edge section: transverse span | 2 | 50 | Horizontal width above the narrow vertical edge-section drawing. |
| Separate edge section: upper wall | 3/4 | 20 | Short vertical span at the upper end of the separate edge section. |
| Separate edge section: lower wall | 3/4 | 20 | Short vertical span at the lower end of the separate edge section. |
| Sink opening corner label:4-R10 | Not printed separately | Not printed separately | Leader labels four opening corners 4-R 10; no separate unit is printed on this radius label. |
Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.
Source page 8: Standard rectangular undermount sink
View original PDF — Source page 8: Standard rectangular undermount sink
Original drawing: Standard rectangular undermount sink.
Original source page 8, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Plan view at the left has a hatched outer flange and sloped bowl surfaces, with a round opening and small oval feature shown inside. A curved bowl section with flange is drawn at the right. Five dimensions describe the outside flange, inner opening and sectional height. Separate diameters for the illustrated interior features are not given.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Sink outside width | 20-1/8 | 511 | Full horizontal width including the outer flange in plan view. |
| Sink outside depth | 15 | 381 | Full front-to-back outside span including the flange. |
| Sink inner opening width | 17-3/4 | 451 | Horizontal inner-opening span between the inner flange edges. |
| Sink inner opening depth | 12-5/8 | 320.6 | Front-to-back inner-opening span between the inner flange edges. |
| Sink section height | 7-5/8 | 193.6 | Vertical height indicated beside the sectional view. |
Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.
Source page 9: 36 IN right offset 1.5 IN Double Cove Edge countertop overview
View original PDF — Source page 9: 36 IN right offset 1.5 IN Double Cove Edge countertop overview
Original drawing: 36 IN right offset 1.5 IN Double Cove Edge countertop overview.
Original source page 9, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective of a molded countertop with one opening offset to the right, a faucet hole behind it, a layered front and side edge and a molded rear backsplash. The title uses 1.5 IN Double Cove Edge; no dimension-line callouts occur on this overview.
No dimension callouts are printed on this overview page.
Source page 10: Double Cove Edge countertop dimensions
View original PDF — Source page 10: Double Cove Edge countertop dimensions
Original drawing: Double Cove Edge countertop dimensions.
Original source page 10, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Separate molded backsplash elevation and narrow side profile are at the top; a cove-edge elevation is below them. The bottom plan contains a right offset sink opening, faucet hole and four bracket-hole symbols, plus a separate narrow edge section at the right. The 1-inch rear inset and 2-inch side/front bands are separate from the opening and bracket setbacks.
The source says these dimensions apply exclusively to Double Cove Edge countertops. Its nominal title says 1.5 IN while the detailed edge height is 1-5/8 in/40 mm; both labels are retained without deciding the intended nominal/actual distinction. The source opening front setback reads 4-3/8 in/110 mm.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Backsplash width | 33-7/8 | 860 | Horizontal width of the separate molded backsplash elevation. |
| Backsplash height | 3-7/8 | 100 | Vertical span of the backsplash elevation. |
| Backsplash thickness | 3/4 | 20 | Horizontal thickness of the narrow side profile. |
| Cove edge overall height | 1-5/8 | 40 | Vertical span of the cove-edge elevation; the title separately calls this style 1.5 IN. |
| Cove edge upper segment | 3/4 | 20 | Short vertical segment at the upper part of the edge elevation. |
| Cove edge lower segment | 3/4 | 20 | Short vertical segment at the lower part of the edge elevation. |
| Top plan: outside width | 36 | 914 | Full horizontal width of the countertop plan. |
| Top plan: left edge to faucet axis | 24 | 610 | Upper split dimension from the left outside edge to the faucet and sink axis. |
| Top plan: faucet axis to right edge | 12 | 304 | Upper split dimension from the faucet and sink axis to the right outside edge. |
| Top plan: outside depth | 22 | 560 | Full front-to-back span of the countertop. |
| Top plan: rear edge to opening | 5-1/2 | 140 | Vertical segment from the outside rear edge to the rear edge of the sink opening. |
| Top plan: opening depth | 12-1/4 | 310 | Front-to-back span across the sink opening. |
| Top plan: opening to front edge | 4-3/8 | 110 | Vertical segment from the opening front edge to the outside front edge. |
| Top plan: rear edge to faucet center | 2-3/4 | 70 | Short vertical span from the rear edge to the round faucet-hole center. |
| Top plan: faucet-hole diameter | 1-3/8 | 35 | Diameter leader at the single round faucet hole. |
| Top plan: rear edge to rear bracket row | 6-3/4 | 170 | Internal vertical span from the rear outside edge to the rear bracket-hole row. |
| Top plan: bracket row spacing | 9-7/8 | 250 | Vertical distance between rear and front bracket-hole rows. |
| Top plan: front bracket row to front edge | 5-1/2 | 140 | Vertical span from the front bracket row to the front outside edge. |
| Top plan: left edge to opening | 15-3/8 | 390 | Left segment of the bottom opening chain, from the outside edge to the left side of the opening. |
| Top plan: opening width | 17-3/8 | 440 | Horizontal span across the sink opening. |
| Top plan: opening to right edge | 3-1/4 | 84 | Right segment from the opening right edge to the countertop right outside edge. |
| Top plan: left edge to bracket column | 13-1/8 | 333 | Left segment of the lowest horizontal chain to the left bracket column. |
| Top plan: bracket-column spacing | 21-3/4 | 554 | Horizontal separation of the two bracket-column references. |
| Top plan: bracket column to right edge | 1-1/8 | 27 | Right segment of the lowest horizontal chain to the outside right edge. |
| Top plan: rear inset reference | 1 | 25 | Short vertical span from the rear outside edge to the dashed inset line. |
| Top plan: left inset band | 2 | 50 | Short horizontal span across the inset band at the left side of the plan. |
| Top plan: front inset band | 2 | 50 | Short vertical span from the front outside edge to the front inset reference. |
| Separate edge section: transverse span | 1-5/8 | 40 | Horizontal width above the separate narrow edge section. |
| Sink opening corner label:4-R20 | Not printed separately | Not printed separately | Leader labels four opening corners 4-R 20; no separate unit is printed on this radius label. |
Source note: The source states: All measurements are plus or minus 1/4 inch. This source tolerance is reproduced without approving or recalculating any dimension.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.