Wishlist

Charlotte Oak 60 single sink vanity - drawing text version

Charlotte Oak 60 single-sink vanity - source drawing text version

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source warnings and unresolved dimensions in mind when using this text version.

Drawing text — flagged details need confirmation

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the two original drawing pages. Each printed callout is transcribed independently without correcting, converting or approving engineering values. This companion does not establish installation dimensions or included accessories.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

Every printed callout is retained separately, including repeated values and small labels such as 2 mm [0 in]. Paired numbers are source labels, not exact unit conversions; no controlling unit or tolerance is inferred.

Original drawing labels and reference lines describe the source only. They are not a new approval for installation, drilling, fabrication, or accessory inclusion.

CHA60-P2-CIRCLE-SYMBOL - source page 2

Circular rear-panel leader has unresolved printed question-mark prefixes: ?2 1/4 in / ?60 mm.

Both the rendered source and its text layer show a question-mark prefix before the circular callout values. The intended symbol and interpretation are not established.

Obtain a legible corrected drawing or confirmation from Willow Bath and Vanity before interpreting this as an approved hole diameter. No correction has been made.

Source page 1: Cabinet top plan, side elevation and separate U-shaped form

View original PDF — Source page 1: Cabinet top plan, side elevation and separate U-shaped form

Original drawing: Cabinet top plan, side elevation and separate U-shaped form.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The top of page 1 shows a wide cabinet plan with drawer regions at both ends and a central U-shaped internal form with a rear notch. Several nested widths are separately dimensioned, followed by a detailed lower horizontal chain of frame, front, partition and clearance references. All callouts, including small zero-inch labels, are retained separately.

The lower left is a side elevation with top profile, drawer-box sections, lower base and foot references. It separately labels front-row spans and internal drawer-box heights; those features are not interchangeable. The lower right repeats the central U-shaped form as a separate view with two 270 mm arms, overall width 670 mm and depth 438 mm. Its notch itself has no printed width/depth pair.

This source page has several different nested central widths: 694, 670 and 676 mm. Each follows its own drawn reference lines; none is substituted for another or used to infer a single clear opening.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Top plan: central bay width 27 1/4 694 Horizontal reference span above the central U-shaped bay, between its outside side reference lines.
Top plan: rear short depth segment 2 50 Upper short segment of the left vertical chain, between rear outside and first inset references.
Top plan: middle depth segment 17 434 Middle segment of the left vertical chain between the rear and front inset references.
Top plan: front short depth segment 2 50 Lower short segment of the left vertical chain, between front inset and outer reference.
Top plan: inset overall depth 21 3/4 555 Second outer vertical dimension at the left, across the cabinet-depth references.
Top plan: outside overall depth 22 560 Outermost left vertical dimension across the full outside depth.
Top plan: outside overall width 60 1524 Uppermost width line between the furthest outside left and right references.
Top plan: second overall width 59 1/2 1514 Second width line, between the slightly inset outside cabinet references.
Top plan: third nested width 58 1472 Third width line between its inset left and right structural references.
Top plan: fifth nested width 55 3/4 1416 Lowest long nested width line above the view, between further inset references.
Top plan: fourth nested width 57 1/4 1452 Fourth long nested width line above the view, between its corresponding inset references.
Top plan: left U-shaped arm width 10 3/4 270 Left upper horizontal span of the central U-shaped form, from its left side to the notch left side.
Top plan: right U-shaped arm width 10 3/4 270 Right upper horizontal span of the central U-shaped form, from notch right side to right side.
Top plan: central inner width 26 1/2 670 Upper of the two lower central width lines, between the inner side references of the U-shaped form.
Top plan: central adjacent width 26 1/2 676 Lower of the two lower central width lines, between the slightly wider adjacent side references.
Top plan: small left clearance 0 3 Short horizontal reference at the left side of the central U-shaped form. Its paired inch label is printed as zero.
Top plan: lower width chain 1 1/4 5 The lower left-to-right reference chain: leftmost outside/inset edge offset.
Top plan: lower width chain 2 3/4 21 The lower left-to-right reference chain: left outer frame span.
Top plan: lower width chain 3 2 50 The lower left-to-right reference chain: left stile span.
Top plan: lower width chain 4 0 2 The lower left-to-right reference chain: clearance after the left stile.
Top plan: lower width chain 5 12 3/4 326 The lower left-to-right reference chain: left front-bay span.
Top plan: lower width chain 6 0 2 The lower left-to-right reference chain: clearance before the left inner partition.
Top plan: lower width chain 7 3/4 18 The lower left-to-right reference chain: left inner partition span.
Top plan: lower width chain 8 0 2 The lower left-to-right reference chain: clearance after that partition.
Top plan: lower width chain 9 13 1/4 335 The lower left-to-right reference chain: left central-front span.
Top plan: lower width chain 10 0 2 The lower left-to-right reference chain: central front meeting gap.
Top plan: lower width chain 11 13 1/4 335 The lower left-to-right reference chain: right central-front span.
Top plan: lower width chain 12 0 2 The lower left-to-right reference chain: clearance before the right inner partition.
Top plan: lower width chain 13 3/4 18 The lower left-to-right reference chain: right inner partition span.
Top plan: lower width chain 14 0 2 The lower left-to-right reference chain: clearance after that partition.
Top plan: lower width chain 15 12 3/4 326 The lower left-to-right reference chain: right front-bay span.
Top plan: lower width chain 16 0 2 The lower left-to-right reference chain: clearance before the right stile.
Top plan: lower width chain 17 2 50 The lower left-to-right reference chain: right stile span.
Top plan: lower width chain 18 3/4 21 The lower left-to-right reference chain: right outer frame span.
Top plan: lower width chain 19 1/4 5 The lower left-to-right reference chain: rightmost outside/inset edge offset.
Top plan: central form depth 17 1/4 438 Vertical span at the right of the central U-shaped form, between upper and lower form references.
Side view: outside top depth 22 560 Horizontal width above the side elevation, from front outside reference to the rear reference.
Side view: upper internal drawer height 3 3/4 96 Vertical internal span across the upper drawer box shown.
Side view: middle internal drawer height 3 3/4 96 Separate vertical internal span across the middle drawer box shown.
Side view: bottom outer depth 21 3/4 555 Lowest horizontal depth dimension, between its outside front and rear references.
Side view: bottom inset depth 21 534 Middle of the three lower depth lines, from inset front/body reference to rear reference.
Side view: lower rear short span 4 100 Short vertical span at the lower right, above the bottom base region.
Side view: right base height 4 3/4 122 Bottom right vertical span between upper base/rail and foot/bottom references.
Side view: rear middle span 18 1/4 466 Middle vertical reference to the right of the side view, between the indicated rear horizontal references.
Side view: upper front short span 1 1/4 29 Short upper left vertical span below the top profile.
Side view: upper front opening span 6 151,5 Upper front-row vertical span on the left of the side view.
Side view: lower front opening span 12 3/4 321 Taller lower front-row vertical span on the left of the side view.
Side view: middle front opening span 6 151,5 Middle front-row vertical span on the left of the side view.
Side view: overall cabinet height 33 1/2 850 Outside left vertical span from upper cabinet/profile reference to bottom/foot reference.
Side view: left base height 4 3/4 122 Bottom left vertical span across the base/foot region.
Side view: left body span 26 660 Outer of the two repeated body-height references on the left side.
Side view: lower inner depth 20 3/4 528 Uppermost lower horizontal depth line across the base region.
Side view: rear body span 25 1/4 639 Long right-hand body reference from upper internal line to lower body line.
Side view: repeated body span 26 660 Inner of the two repeated body-height references on the left side.
Side view: short top offset 3/4 18 Short horizontal reference beneath the front top-profile edge.
Side view: upper rear span 6 3/4 171 Upper short vertical reference at the right of the side elevation.
Separate U-shaped form: overall depth 17 1/4 438 Overall vertical span of the separate U-shaped outline at lower right.
Separate U-shaped form: left arm 10 3/4 270 Horizontal span from outside left edge to left side of the central notch.
Separate U-shaped form: right arm 10 3/4 270 Horizontal span from right side of the central notch to outside right edge.
Separate U-shaped form: overall width 26 1/2 670 Lower horizontal span across the full separate U-shaped outline.

Source note: Every printed callout is retained separately, including repeated values and small labels such as 2 mm [0 in]. Paired numbers are source labels, not exact unit conversions; no controlling unit or tolerance is inferred.

Source note: Original drawing labels and reference lines describe the source only. They are not a new approval for installation, drilling, fabrication, or accessory inclusion.

Source note: TECHNICAL DRAWING, Willow Collections and Solid Wood Construction Bathroom Vanity are legacy words printed in the source; they do not create a new material certification.

Source note: Decimal commas such as 151,5, 486,5 and 147,5 are retained exactly as printed. Different nested dimensions retain their own reference lines.

Back to contents

Source page 2: Cabinet front and rear elevations, separate rear-panel detail

View original PDF — Source page 2: Cabinet front and rear elevations, separate rear-panel detail

Original drawing: Cabinet front and rear elevations, separate rear-panel detail.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The upper view is a cabinet front elevation with four stacked fronts at each end, two tall central door/front panels and one wide lower central front. A shaped base spans beneath. The sheet separately prints 850 mm cabinet-reference height and 900 mm upper-profile-to-bottom height, with a 50 mm top-profile callout. No missing countertop configuration is inferred.

The middle view is the cabinet rear elevation. A rounded rectangular central opening is shown above a lower region with two circular marks. The horizontal opening-reference chain is 647, 220 and 647 mm; the vertical opening-reference chain is 235, 270 and 345 mm. Separate 236 mm side-to-circle-center references are printed.

The bottom view is a separate rectangular rear-panel detail, 1470 mm wide and 400 mm high. Its central rounded opening is placed by a 625, 220, 625 mm horizontal chain and a 49 mm top offset with 270 mm opening-height callout. The two circular marks have a 210, 1050, 210 mm spacing chain. A slanted leader on the left circle is visibly labelled ?60 [?2 1/4]; the question-mark prefixes are retained as unresolved source symbols, not replaced with a diameter sign.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Front elevation: top slab height 2 50 Upper left short vertical span across the rectangular top profile.
Front elevation: upper left rail span 3/4 21 Short vertical reference above the upper left drawer/front.
Front elevation: first left front height 6 151,5 Uppermost of four separately printed front-row heights on the left.
Front elevation: second left front height 6 151,5 Second of four separately printed front-row heights on the left.
Front elevation: third left front height 6 151,5 Third of four separately printed front-row heights on the left.
Front elevation: fourth left front height 6 151,5 Lowest of four separately printed front-row heights on the left.
Front elevation: left base height 4 3/4 122 Left lower vertical span from body/base boundary to bottom/foot reference.
Front elevation: first left separator 3/4 18 First small rail/separator span between the left front rows.
Front elevation: second left separator 3/4 18 Second small rail/separator span between the left front rows.
Front elevation: third left separator 3/4 18 Third small rail/separator span between the left front rows.
Front elevation: bottom left rail 3/4 18 Small lower rail span below the lowest left front row.
Front elevation: overall top width 60 1524 Full outside horizontal span above the top profile.
Front elevation: cabinet height reference 33 1/2 850 Inner left vertical dimension below the rectangular top profile to bottom/foot reference.
Front elevation: overall height reference 35 1/2 900 Outer left vertical dimension from topmost profile edge to bottom/foot reference.
Front elevation: upper right rail span 3/4 21 Short vertical rail/reference dimension at the upper right.
Front elevation: upper right profile span 1 1/4 29 Separate leader-labelled short upper profile/reference span on the right.
Front elevation: upper central-front clearance 0 2 Small upper clearance in the right-side vertical chain, before the tall central-front span.
Front elevation: tall central-front height 19 1/4 486,5 Long central-door/front reference span in the right-side vertical chain.
Front elevation: clearance below tall front 0 2 Small gap immediately below the tall central-front span in the right-side chain.
Front elevation: middle separator rail 3/4 18 Short separator span between tall central fronts and the lower central front.
Front elevation: clearance above lower front 0 2 Small gap above the lower central front span.
Front elevation: lower central-front height 5 3/4 147,5 Vertical span of the lower wide central front in the right-side chain.
Front elevation: clearance below lower front 0 2 Small gap below the lower wide central front.
Front elevation: lower right rail 3/4 18 Short lower rail span above the base region at right.
Front elevation: right base height 4 3/4 122 Bottom right vertical span across the base/foot region.
Front elevation: lower width chain left frame 3/4 21 First left outer-frame segment of the lower horizontal chain.
Front elevation: lower width chain left stile 2 50 Left stile segment of the lower horizontal chain.
Front elevation: gap after left stile 0 2 Small lower-chain clearance between left stile and left front bay.
Front elevation: left front-bay width 12 3/4 326 Lower horizontal span across the left drawer/front bay.
Front elevation: gap before left partition 0 2 Small clearance between left front bay and its inner partition.
Front elevation: left inner partition 3/4 18 Short lower-chain span across left inner partition.
Front elevation: central bay width 26 1/2 672 Lower horizontal span across the central paired-front bay.
Front elevation: gap before right partition 0 2 Small lower-chain clearance from central bay to right inner partition.
Front elevation: right inner partition 3/4 18 Short lower-chain span across right inner partition.
Front elevation: gap after right partition 0 2 Small lower-chain clearance between right inner partition and right front bay.
Front elevation: right front-bay width 12 3/4 326 Lower horizontal span across the right drawer/front bay.
Front elevation: gap before right stile 0 2 Small clearance between right front bay and right stile.
Front elevation: right stile width 2 50 Lower-chain span across right outer stile.
Front elevation: right outer frame 3/4 21 Lower-chain span across right outer frame region.
Front elevation: gap after left partition 0 2 Small lower-chain clearance between left inner partition and central bay. Its label is printed above the chain.
Front elevation: outside body width 59 1/2 1514 Lowest full horizontal reference between cabinet outside side references.
Front elevation: left edge to center 30 762 Upper horizontal half-width span from outside left top edge to central axis.
Rear elevation: lower vertical span 13 1/2 345 Lower left vertical reference, from rear-opening lower edge to bottom/base reference.
Rear elevation: opening height 10 3/4 270 Middle vertical reference spanning the rectangular rear opening.
Rear elevation: upper vertical span 9 1/4 235 Upper vertical reference from top of rear elevation to rear-opening top.
Rear elevation: left opening offset 25 1/2 647 Left upper horizontal segment from outside rear left edge to opening left edge.
Rear elevation: opening width 8 3/4 220 Middle upper horizontal segment across the rear opening.
Rear elevation: right opening offset 25 1/2 647 Right upper horizontal segment from opening right edge to outside rear right edge.
Rear elevation: outside width 59 1/2 1514 Lower full horizontal reference across the rear elevation.
Rear elevation: left circular-hole offset 9 1/4 236 Horizontal reference from outside left side to center of the left circular mark.
Rear elevation: right circular-hole offset 9 1/4 236 Horizontal reference from center of the right circular mark to outside right side.
Separate rear-panel detail: width 57 3/4 1470 Overall upper horizontal width across the detached rectangular rear-panel detail.
Separate rear-panel detail: unresolved circular callout ?2 1/4 ?60 Leader crosses the left circular mark. The printed prefix appears as a question mark in both unit labels; it is preserved verbatim and is not silently replaced with a diameter sign.Unresolved: CHA60-P2-CIRCLE-SYMBOL
Separate rear-panel detail: left opening offset 24 1/2 625 Upper left horizontal segment from panel left edge to central opening left edge.
Separate rear-panel detail: opening width 8 3/4 220 Middle upper horizontal segment across the central rounded rectangular opening.
Separate rear-panel detail: right opening offset 24 1/2 625 Upper right horizontal segment from opening right edge to panel right edge.
Separate rear-panel detail: height 15 3/4 400 Overall vertical dimension at the right of the rectangular panel.
Separate rear-panel detail: upper opening offset 2 49 Short upper right vertical span from panel top to opening top.
Separate rear-panel detail: opening height 10 3/4 270 Inner right vertical span from top to bottom of the opening.
Separate rear-panel detail: left circular-hole offset 8 1/4 210 Bottom left horizontal segment from panel edge to center of left circular mark.
Separate rear-panel detail: circular-hole spacing 41 1/4 1050 Bottom middle horizontal segment between the centers of the two circular marks.
Separate rear-panel detail: right circular-hole offset 8 1/4 210 Bottom right horizontal segment from right circular mark center to panel edge.

Source note: Every printed callout is retained separately, including repeated values and small labels such as 2 mm [0 in]. Paired numbers are source labels, not exact unit conversions; no controlling unit or tolerance is inferred.

Source note: Original drawing labels and reference lines describe the source only. They are not a new approval for installation, drilling, fabrication, or accessory inclusion.

Source note: TECHNICAL DRAWING, Willow Collections and Solid Wood Construction Bathroom Vanity are legacy words printed in the source; they do not create a new material certification.

Source note: Decimal commas such as 151,5, 486,5 and 147,5 are retained exactly as printed. Different nested dimensions retain their own reference lines.

Source note: Unresolved source symbol CHA60-P2-CIRCLE-SYMBOL: ?60 [?2 1/4] is printed beside a circular mark; no symbol correction or approved diameter is supplied.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.