Wishlist

Chicago_36L_Spec.pdf — drawing text version

Chicago 36L source drawing - source drawing text companion

PDF with text descriptions — 5 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the source file Chicago_36L_Spec.pdf. Printed values and separate view references are retained without changing or approving engineering dimensions.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Bracketed labels contain the inch mark and are reproduced in the Inches column. The separate unbracketed numbers are reproduced as Unbracketed value because no explicit unit label is printed for them. No conversion or controlling unit is inferred.

Source limitations

Bracketed labels contain the inch mark and are reproduced in the Inches column. The separate unbracketed numbers are reproduced as Unbracketed value because no explicit unit label is printed for them. No conversion or controlling unit is inferred.

The footer reads Solid Wood Construction Bathroom Vanity and the logo reads Willow Collections. These are source labels, not a new claim about the material or accessories supplied with any current product.

Source page 1: Top plan, front elevation and side elevation

View original PDF — Source page 1: Top plan, front elevation and side elevation

Original drawing: Top plan, front elevation and side elevation.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The top plan at upper left shows a rectangular countertop with a left-positioned basin, a faucet feature behind it and a drain feature inside it. A narrow cabinet bay is on the right. The split upper dimension locates the faucet and basin axis; no hole diameter or sink-opening dimensions are printed.

The front elevation below the plan shows two tall doors on the left and three stacked drawer fronts on the right, each with hardware marks. The two door widths and the lower broad and narrow region spans are separate callouts. The outer cabinet width differs from the countertop width.

The side elevation at lower right shows a countertop and backsplash above three internal drawer-box outlines and legs. Front is at the left and rear at the right. The rear vertical chain identifies reference levels without naming their function, so it is not presented as an approved plumbing cutout.

The visible page heading is TECHNICAL DRAWING. Chicago_36L_Spec.pdf is the source filename; the drawing itself does not label a finish or material specification beyond the generic footer.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Inches Unbracketed value Reference points / meaning
Top plan: countertop width 36 914 Full outside horizontal span above the countertop outline.
Top plan: cabinet width 35-1/4 894 Second horizontal span between the cabinet outside side references beneath the top.
Top plan: left edge to faucet axis 12-5/8 320 Left part of the split width chain, from the outside left edge to the faucet and sink center axis.
Top plan: faucet axis to right edge 23-3/8 594 Right part of the split width chain, from the faucet axis to the outside right edge.
Top plan: countertop depth 22 560 Outside vertical span at the left of the top view.
Top plan: cabinet depth 21-5/8 550 Inner of the two left vertical spans, between cabinet depth references.
Front: countertop width 36 914 Full outside horizontal span above the front elevation.
Front: left edge to upper axis reference 12-5/8 320 Short upper span from the slab left edge to the reference aligned with the sink axis in plan.
Front: height including countertop 35-7/8 910 Outside left vertical span from top surface to the shown lower foot reference.
Front: cabinet height below countertop 33-1/2 850 Inner left vertical span from underside of the countertop to the shown lower foot reference.
Front: left door span 9-5/8 245 Horizontal span across the left door between its outer front references.
Front: second door span 9-5/8 245 Horizontal span across the second door between its outer front references.
Front: lower paired-door region 20-1/2 520 Left lower horizontal span from the inside left frame reference to the right boundary of the paired-door region.
Front: lower narrow drawer region 9-5/8 244 Right lower horizontal span between the drawer-region references; kept separate from the door labels of 245.
Front: cabinet outside width 35-1/4 894 Lowest full horizontal span across the outside cabinet side references.
Side: countertop depth 22 560 Full horizontal span across the slab at the top of the side elevation.
Side: upper drawer-box height 6 152 Upper left vertical span across the highest internal drawer-box outline.
Side: middle drawer-box height 6 152 Second left vertical span across the middle internal drawer-box outline.
Side: lower drawer-box height 10-7/8 276 Third left vertical span across the lower internal drawer-box outline.
Side: lower leg-space reference 3-7/8 98 Lowest left vertical span from the lower rail reference to the shown lower foot reference.
Side: upper rear reference 5-3/8 138 Upper right vertical segment from the cabinet top below the slab to the next rear reference level.
Side: middle rear reference 18-3/4 477 Middle right vertical segment between the two intermediate rear reference levels.
Side: lower rear reference 9-1/8 233 Lowest right vertical segment from the lower intermediate rear reference to the shown lower foot reference.
Side: cabinet depth 21-5/8 550 Bottom horizontal span across the cabinet side depth references.

Source note: The printed 33-1/2 and 850 height labels are reproduced as shown; this text does not supply a corrected or approved installation dimension.

Source note: No source tolerance or controlling unit is printed on this sheet.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.