Chicago_42_Spec.pdf — drawing text version
Chicago_42_Spec.pdf - source drawing text companion
PDF with text descriptions — 5 pages
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of the source file Chicago_42_Spec.pdf. Printed values and separate view references are retained without changing or approving engineering dimensions.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Bracketed labels contain the inch mark and are reproduced in the Inches column. The separate unbracketed numbers are reproduced as Unbracketed value because no explicit unit label is printed for them. No conversion or controlling unit is inferred.
Source limitations
Bracketed labels contain the inch mark and are reproduced in the Inches column. The separate unbracketed numbers are reproduced as Unbracketed value because no explicit unit label is printed for them. No conversion or controlling unit is inferred.
The footer reads Solid Wood Construction Bathroom Vanity and the logo reads Willow Collections. These are source labels; the text does not establish the material, finish or accessories supplied with a current product.
The separate view dimensions are reproduced as printed. This text does not supply corrected or approved installation dimensions, a drilling plan or an unstated dimensional tolerance.
Source page 1: Top plan, front elevation and side elevation
View original PDF — Source page 1: Top plan, front elevation and side elevation
Original drawing: Top plan, front elevation and side elevation.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper-left top plan shows a rectangular countertop with one centered basin, a small faucet feature behind it and a drain feature inside it. The faucet and basin share the axis located by the left upper 533 reference. A 450 reference is drawn across the basin opening near its front edge.
The front elevation below the plan shows a central pair of tall doors with three stacked drawer fronts on each side, hardware marks, lower framing and feet. Its upper 533 span runs from the central axis to the right countertop edge. Lower width references identify each outer drawer region and the combined central door region.
The lower-right side view shows the countertop, an upright backsplash, three drawer outlines and supporting legs. Front is on the left and rear on the right. The right vertical chain marks separate reference levels without naming a plumbing opening.
The visible heading is TECHNICAL DRAWING; the drawing does not show a model name or finish designation beyond the generic footer. The source identity is Chicago_42_Spec.pdf.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Unbracketed value | Reference points / meaning |
|---|---|---|---|
| Top plan: countertop width | 42 | 1066 | Full outside horizontal span above the countertop outline. |
| Top plan: cabinet width | 41-1/8 | 1046 | Second full horizontal span between the cabinet outside side references beneath the top. |
| Top plan: left edge to faucet axis | 21 | 533 | Short upper horizontal span from the outside left slab edge to the central faucet and basin axis. |
| Top plan: countertop depth | 22 | 560 | Outside vertical span at the left of the top view. |
| Top plan: cabinet depth | 21-5/8 | 550 | Inner of the two left vertical spans, between the cabinet depth references. |
| Top plan: basin-opening horizontal reference | 17-3/4 | 450 | Horizontal span across the inner basin-opening outline near its front edge. |
| Front: countertop width | 42 | 1066 | Full outside horizontal span above the front elevation. |
| Front: center axis to right edge | 21 | 533 | Short upper span from the central reference aligned with the plan basin axis to the outside right slab edge. |
| Front: height including countertop | 35-7/8 | 910 | Outside left vertical span from the countertop top surface to the shown lower foot reference. |
| Front: cabinet height below countertop | 33-1/2 | 850 | Inner left vertical span from the underside of the countertop to the shown lower foot reference. |
| Front: left drawer-region width | 9 | 230 | Lower horizontal span across the left drawer region, between its outer references. |
| Front: central paired-door region width | 16-3/4 | 426 | Lower central horizontal span across the two-door region, between its outer references. |
| Front: right drawer-region width | 9 | 230 | Lower horizontal span across the right drawer region, between its outer references. |
| Front: cabinet outside width | 41-1/8 | 1046 | Lowest full horizontal span across the outside cabinet side references. |
| Side: upper drawer-region height | 6 | 152 | Upper left vertical span between the outer references beside the highest drawer position. |
| Side: middle drawer-region height | 6 | 152 | Second left vertical span between the outer references beside the middle drawer position. |
| Side: lower drawer-region height | 10-7/8 | 276 | Third left vertical span between the outer references beside the lowest drawer position. |
| Side: lower leg-space reference | 3-7/8 | 98 | Lowest left vertical span from the lower rail reference to the shown lower foot reference. |
| Side: upper rear reference | 5-3/8 | 138 | Upper right vertical segment from the cabinet top below the slab to the next rear reference level. |
| Side: middle rear reference | 18-3/4 | 477 | Middle right vertical segment between the two intermediate rear reference levels. |
| Side: lower rear reference | 9-1/8 | 233 | Lowest right vertical segment from the lower intermediate rear reference to the shown lower foot reference. |
| Side: cabinet depth | 21-5/8 | 550 | Lowest horizontal span across the cabinet side-depth references. |
Source note: The plan 533 span is measured from the left edge to the central axis; the separate front 533 span runs from the axis to the right edge. They are retained as separate callouts.
Source note: The printed height pairs 35-7/8 /910 and 33-1/2 /850 remain unchanged. Rear segments 138, 477 and 233 are separate reference spans and are not added to recalculate cabinet height.
Source note: The side view does not print a second countertop-depth dimension; the top-plan 22 /560 callout is not duplicated as a new side-view value.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.