Hampton Floating 30 vanity - drawing text version
Hampton floating 30 vanity - source drawing text version
PDF with text descriptions — 9 pages.
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of the two original drawing pages. Each printed callout is transcribed independently without correcting, converting or approving engineering values. This companion does not establish installation dimensions or included accessories.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.
Source limitations
Every printed callout is retained separately, including repeated values and small labels such as 2 mm [0 in]. Paired numbers are source labels, not exact unit conversions; no controlling unit or tolerance is inferred.
Original drawing labels and reference lines describe the source only. They are not a new approval for installation, drilling, fabrication, or accessory inclusion.
TECHNICAL DRAWING, Willow Collections and Solid Wood Construction Bathroom Vanity are legacy words printed in the source; they do not create a new material certification.
Source page 1: Countertop plan, separate profile and cabinet perspective
View original PDF — Source page 1: Countertop plan, separate profile and cabinet perspective
Original drawing: Countertop plan, separate profile and cabinet perspective.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper view is a countertop plan with straight rear edge, rounded front corners, a centered rounded rectangular sink opening and one circular faucet-hole symbol. Overall width and depth are 762 by 560 mm, and the opening is labelled 450 by 320 mm. A 381 mm horizontal reference locates the center from the left edge; no faucet-hole diameter or rear-to-hole distance is labelled.
A separate narrow horizontal rectangular profile below the plan is dimensioned 762 by 50 mm. The lower perspective illustrates a floating-style grooved cabinet with rounded front corners, two stacked fronts and an internal U-shaped form visible through the open top. The perspective has width 762 mm, depth 560 mm and height-reference 500 mm. These are the pictured source references, not mounting height or wall-load instructions.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Countertop plan: outside width | 30 | 762 | Full horizontal dimension across the rectangular top outline. |
| Separate horizontal profile: width | 30 | 762 | Full horizontal span of the narrow rectangular profile below the countertop plan. |
| Separate horizontal profile: height | 2 | 50 | Vertical span across that narrow rectangular profile; no installation configuration is established. |
| Countertop plan: sink-opening width | 17 3/4 | 450 | Horizontal dimension across the rounded rectangular sink opening. |
| Countertop plan: sink-opening depth | 12 1/2 | 320 | Vertical dimension across the rounded rectangular sink opening. |
| Countertop plan: left edge to center | 15 | 381 | Horizontal half-width from the outside left edge to the center reference aligned with the faucet and opening. |
| Countertop plan: outside depth | 22 | 560 | Outside vertical span at the left of the top outline. |
| Cabinet perspective: height reference | 19 3/4 | 500 | Vertical dimension alongside the bare-cabinet perspective, from top profile to lower profile reference. |
| Cabinet perspective: width reference | 30 | 762 | Oblique dimension along the wide rear/top edge of the cabinet perspective. |
| Cabinet perspective: depth reference | 22 | 560 | Oblique dimension along the short side/top edge of the cabinet perspective. |
Source note: Every printed callout is retained separately, including repeated values and small labels such as 2 mm [0 in]. Paired numbers are source labels, not exact unit conversions; no controlling unit or tolerance is inferred.
Source note: Original drawing labels and reference lines describe the source only. They are not a new approval for installation, drilling, fabrication, or accessory inclusion.
Source note: TECHNICAL DRAWING, Willow Collections and Solid Wood Construction Bathroom Vanity are legacy words printed in the source; they do not create a new material certification.
Source page 2: U-shaped form, side and front elevations, cabinet top plan
View original PDF — Source page 2: U-shaped form, side and front elevations, cabinet top plan
Original drawing: U-shaped form, side and front elevations, cabinet top plan.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper left is a detached U-shaped form: 550 mm overall width, 405 mm depth, two 200 mm arm widths and a 205 mm vertical notch reference. The upper right side elevation shows a top rectangular profile, grooved exterior surface, two internal drawer sections and a lower rectangular profile; the 550 mm total-height reference includes the pictured upper profile.
The middle front elevation repeats the top and bottom profiles around two grooved fronts. It labels 762 mm width, a 381 mm center reference and 550 mm total vertical span. Small profile and clearance spans remain distinct from the long 424 mm grooved-front span. A lower chain identifies left and right curved-front regions, clearances and the central 558 mm span.
The bottom plan shows nested outer and structural outlines, rounded front corners, a basin outline and circular faucet symbol. Outside width/depth are 762 by 560 mm; the inset references include 752, 555, 562 and 696 mm. The 696 mm line is an internal structural reference, not a sink-opening size. Repeated bottom-chain 90, 2, 558, 2 and 90 mm labels belong to that particular front layout; they are not silently summed into a replacement overall width.
The bare-cabinet perspective on page 1 uses a 500 mm height reference, while page 2 uses 550 mm across the pictured assembly with its 50 mm upper rectangular profile. Preserve the different pictured references; do not turn either into a customer installation or wall-mount height.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Separate U-shaped form: left arm | 7 3/4 | 200 | Upper horizontal span from left outside side to left side of the notch. |
| Separate U-shaped form: overall depth | 16 | 405 | Outer vertical reference at the left of the U-shaped form. |
| Separate U-shaped form: right arm | 7 3/4 | 200 | Upper horizontal span from right side of notch to right outside side. |
| Separate U-shaped form: notch depth | 8 | 205 | Vertical span inside the notch, from the upper inner reference to the notch lower reference. |
| Separate U-shaped form: width | 21 3/4 | 550 | Lower horizontal span across the entire U-shaped outline. |
| Side elevation: upper small profile span | 1/4 | 8 | Short upper vertical profile/reference segment beside the decorative front surface. |
| Side elevation: tall front-surface span | 16 3/4 | 424 | Long left vertical reference across the grooved exterior side/front surface. |
| Side elevation: lower small profile span | 1/4 | 8 | Short lower profile/reference segment in the same left vertical chain. |
| Side elevation: lower clearance | 0 | 2 | Small clearance immediately below the lower profile reference. |
| Side elevation: bottom profile span | 1 | 28 | Lower vertical span of the rectangular bottom profile. |
| Side elevation: overall height | 21 3/4 | 550 | Outermost right vertical reference from top of upper rectangular profile to bottom of lower profile. |
| Side elevation: body-height reference | 17 1/2 | 444 | Inner right vertical reference from upper body/profile boundary to lower body/profile boundary. |
| Side elevation: shorter bottom depth | 21 3/4 | 550 | Middle lower horizontal depth reference, from inset front reference to rear reference. |
| Side elevation: longer bottom depth | 21 3/4 | 555 | Lowest lower horizontal depth reference, from slightly further outside front reference to rear reference. |
| Side elevation: upper rear span | 6 | 150 | Short upper vertical reference at the rear/right side. |
| Side elevation: rear short offset | 3/4 | 18,5 | Short horizontal reference at the upper rear/right side. |
| Side elevation: outside top depth | 22 | 560 | Full horizontal dimension above the side elevation. |
| Side elevation: upper rectangular-profile height | 2 | 50 | Topmost short left vertical reference across the rectangular upper profile. |
| Side elevation: upper body/profile span | 1 | 28 | Short left vertical reference below the upper rectangular profile. |
| Side elevation: upper clearance | 0 | 2 | Small clearance in the upper left vertical chain. |
| Side elevation: internal drawer depth | 20 | 510 | Uppermost lower horizontal reference, between the inset front drawer/internal reference and rear reference. |
| Front elevation: overall top width | 30 | 762 | Full upper horizontal span across the front elevation. |
| Front elevation: rectangular top-profile height | 2 | 50 | Short left vertical span across the top rectangular profile. |
| Front elevation: upper small molding span | 1/4 | 8 | Short upper left vertical profile/reference segment above the grooved front. |
| Front elevation: grooved front span | 16 3/4 | 424 | Long left vertical reference across the grooved front area. |
| Front elevation: lower small molding span | 1/4 | 8 | Short lower left vertical profile/reference segment beneath the grooved front. |
| Front elevation: lower clearance | 0 | 2 | Small gap in the lower left vertical profile chain. |
| Front elevation: lower rectangular-profile height | 1 | 28 | Short lower left vertical reference across the bottom rectangular profile. |
| Front elevation: overall height | 21 3/4 | 550 | Outer right vertical span from topmost rectangular profile to bottommost profile. |
| Front elevation: middle lower width segment | 22 | 558 | Central lower horizontal span between the two front seam/clearance references. |
| Front elevation: left lower clearance | 0 | 2 | Small lower-chain gap immediately before the central span on the left. |
| Front elevation: left lower corner/front span | 3 1/2 | 90 | Left lower-chain segment across the rounded front-side region. |
| Front elevation: left edge to center | 15 | 381 | Upper half-width horizontal span from left outside edge to center reference. |
| Front elevation: right lower clearance | 0 | 2 | Small lower-chain gap immediately after the central span on the right. |
| Front elevation: right lower corner/front span | 3 1/2 | 90 | Right lower-chain segment across the rounded front-side region. |
| Top plan: left outer small span | 1 | 28 | First small left segment of the upper nested width chain. |
| Top plan: left intermediate small span | 2 | 49 | Second small left segment of the upper nested width chain. |
| Top plan: left inner small span | 3/4 | 18 | Third small left segment of the upper nested width chain. |
| Top plan: inset outside width | 29 1/2 | 752 | Second long upper width reference between inset cabinet side references. |
| Top plan: outside width | 30 | 762 | Uppermost long width reference across the outside countertop outline. |
| Top plan: straight depth segment | 18 1/2 | 470 | Upper vertical segment of the inner left depth chain, down to the start of the front rounded region. |
| Top plan: rounded front depth segment | 3 1/2 | 90 | Lower vertical segment of the inner left depth chain, from the curved-region reference to outside front edge. |
| Top plan: inset depth | 21 3/4 | 555 | Middle left vertical overall depth dimension between inset references. |
| Top plan: outside depth | 22 | 560 | Outermost left vertical overall depth dimension. |
| Top plan: central upper inner span | 22 1/4 | 562 | Central segment of the upper nested width chain, between the inner partition/reference lines. |
| Top plan: right outer small span | 1 | 28 | Outermost small right segment of the upper nested width chain. |
| Top plan: right intermediate small span | 2 | 49 | Middle small right segment of the upper nested width chain. |
| Top plan: right inner small span | 3/4 | 18 | Innermost small right segment of the upper nested width chain. |
| Top plan: right lower clearance | 0 | 2 | Small gap at the right end of the lower central span. |
| Top plan: right lower corner/front span | 3 1/2 | 90 | Rightmost lower-chain span across the curved corner/front region. |
| Top plan: left lower corner/front span | 3 1/2 | 90 | Leftmost lower-chain span across the curved corner/front region. |
| Top plan: central lower span | 22 | 558 | Middle lower horizontal span between the two clearance references. |
| Top plan: wide internal reference | 27 1/2 | 696 | Separate wide horizontal dimension near the rear of the top plan, between the indicated internal structural references; not a sink-opening width. |
| Top plan: left lower clearance | 0 | 2 | Small gap at the left end of the lower central span. |
Source note: Every printed callout is retained separately, including repeated values and small labels such as 2 mm [0 in]. Paired numbers are source labels, not exact unit conversions; no controlling unit or tolerance is inferred.
Source note: Original drawing labels and reference lines describe the source only. They are not a new approval for installation, drilling, fabrication, or accessory inclusion.
Source note: TECHNICAL DRAWING, Willow Collections and Solid Wood Construction Bathroom Vanity are legacy words printed in the source; they do not create a new material certification.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.