Malibu 36 right offset vanity - drawing text version
Malibu 36 right offset vanity - source drawing text version
PDF with text descriptions — 23 pages
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of all ten source pages. Printed cabinet, countertop and sink dimensions are retained with their distinct reference points and styles. No engineering measurements, accessories or current installation approval are inferred.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.
Source limitations
Printed inches and millimeters are retained independently. This text does not establish a controlling measurement unit, current production revision, included accessories or approved installation dimensions.
The cabinet top view labels its depth 21-5/8 in /550 mm; the side view labels 21-3/4 in /550 mm. Both source labels are retained without reconciliation.
Straight Mitered Edge and Double Cove Edge dimensions describe separate countertop styles and must not be interchanged. The Double Cove style title 1.5 IN and detailed edge height 1-5/8 in /40 mm remain separate labels.
Source page 1: Malibu 36 right offset cabinet overview
View original PDF — Source page 1: Malibu 36 right offset cabinet overview
Original drawing: Malibu 36 right offset cabinet overview.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective of an open-top cabinet with two framed doors on the right, a broad drawer below those doors and a narrow column of four stacked fronts on the left. Small hardware-hole marks are drawn on the fronts. Legs extend below the bottom rail. The top exposes a broad open bay and the narrower drawer compartment; no countertop, sink or separate dimension callouts appear on this page.
The source title reads MALIBU 36 IN SINGLE RIGHT OFFSET SINK BATHROOM VANITY. Footer branding is Willow Bath and Vanity, willowbathandvanity.com, info@willowbathandvanity.com and 1-877-788-8444. The drawing does not establish accessories included with a purchased configuration.
No dimension callouts are printed on this overview page.
Source page 2: Cabinet front view
View original PDF — Source page 2: Cabinet front view
Original drawing: Cabinet front view.
Original source page 2, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Front elevation shows two paired doors in the broad right bay with a broad drawer below, and four stacked fronts in the narrow left column. Dimensions distinguish full cabinet width and height, separate front spans and two hardware-hole spacings. Dashed horizontal lines indicate an internal reference behind the doors.
A leader at the lower paired fronts in the left column reads Double Drawer with Power Station and Organizer. This reproduces a source annotation and does not establish the accessories in an order.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet width | 35-1/4 | 894 | Full horizontal width between the outer cabinet edges. |
| Left narrow-front width | 9-7/8 | 250 | Upper horizontal span across the narrow left front column. |
| Right paired-door bay width | 20-3/4 | 526 | Upper horizontal span across the broad right front bay. |
| Overall cabinet height | 33-1/2 | 850 | Outside vertical span from the top cabinet edge to the foot/base reference, drawn at the right. |
| Paired-door front height | 21 | 534 | Vertical span across the door fronts in the broad right bay. |
| Broad lower-drawer front height | 6-1/2 | 166 | Vertical span across the broad drawer below the right doors. |
| Bottom rail-to-foot reference | 3-3/4 | 96 | Lower vertical span from the bottom-rail reference to the foot/base reference at the right. |
| Door hardware-hole spacing | 5 | 128 | Vertical center-to-center spacing between the indicated two door hardware holes. |
| Interior dashed reference to door bottom | 9-7/8 | 250 | Vertical span from the lower dashed interior reference to the bottom of the paired-door front. |
| Narrow top-front height | 6-1/2 | 166 | First vertical front span at the top of the narrow left column. |
| Narrow second-front height | 6-1/2 | 166 | Second vertical front span in the narrow left column. |
| Narrow lower paired-front span | 13-3/4 | 350 | Combined vertical reference spanning the lower two fronts in the narrow left column. |
| Narrow-front hardware-hole spacing | 5 | 128 | Horizontal center-to-center span between the two indicated holes in the upper left front. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not recalculated or approved for installation.
Source page 3: Cabinet top view
View original PDF — Source page 3: Cabinet top view
Original drawing: Cabinet top view.
Original source page 3, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The open rectangular plan shows a broad compartment on the right and a narrower rectangular drawer compartment on the left. Outer rails and dashed internal edges are shown. Only the full width, outside depth and the narrower compartment internal front-to-back span are dimensioned.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet width | 35-1/4 | 894 | Full horizontal span across the outer top-plan edges. |
| Overall cabinet depth | 21-5/8 | 550 | Outer front-to-back span at the right of the plan. |
| Narrow compartment internal depth | 16 | 410 | Internal front-to-back span in the narrower left compartment. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not recalculated or approved for installation.
Source page 4: Cabinet back view
View original PDF — Source page 4: Cabinet back view
Original drawing: Cabinet back view.
Original source page 4, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Rear elevation shows a broad back panel containing a rounded rectangular opening toward the left and a small circular feature toward the lower right. The horizontal and vertical chains locate the rectangular opening; three additional spans locate the circular feature center. No circular diameter is printed, and no diameter or installation function is inferred.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall rear width | 35-1/4 | 894 | Full horizontal span between the outer rear cabinet edges. |
| Left edge to opening | 7-1/4 | 184 | Horizontal chain from the outside left edge to the opening left edge. |
| Rear opening width | 8-5/8 | 220 | Horizontal width of the rectangular rear opening. |
| Opening to right edge | 19-1/4 | 490 | Horizontal chain from the opening right edge to the outside right edge. |
| Cabinet top to opening | 7-1/8 | 181 | Upper vertical chain at the left, from cabinet top to rectangular opening top. |
| Rear opening height | 10-5/8 | 270 | Vertical span of the rectangular rear opening. |
| Opening bottom to foot reference | 15-3/4 | 399 | Lower vertical chain from rectangular opening bottom to the foot/base reference at the left. |
| Circular feature center above base | 12-1/2 | 316 | Vertical location from the base reference to the center of the round feature on the right. |
| Left edge to circular center | 28-1/4 | 719 | Lower horizontal left segment to the circular feature center. |
| Circular center to right edge | 6-7/8 | 175 | Lower horizontal right segment from the circular center to the outer right edge. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not recalculated or approved for installation.
Source page 5: Cabinet side view
View original PDF — Source page 5: Cabinet side view
Original drawing: Cabinet side view.
Original source page 5, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Side elevation shows the frame, feet and three dashed internal drawer-box outlines. The front face is at the right of this view. A support/foot appears beneath the lower interior. Two upper box heights and one larger lower box height are dimensioned independently. The outside depth reads 21-3/4 in /550 mm here, while the top view reads 21-5/8 in /550 mm; both labels remain unchanged.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Overall cabinet depth | 21-3/4 | 550 | Outer horizontal span across the side view. |
| Upper drawer-box height | 3-3/4 | 96 | First vertical span across the top dashed drawer box. |
| Middle drawer-box height | 3-3/4 | 96 | Second vertical span across the middle dashed drawer box. |
| Lower drawer-box height | 9-1/2 | 240 | Vertical span across the larger lower dashed drawer box. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not recalculated or approved for installation.
Source page 6: 36 IN right offset 2 IN Straight Mitered Edge countertop overview
View original PDF — Source page 6: 36 IN right offset 2 IN Straight Mitered Edge countertop overview
Original drawing: 36 IN right offset 2 IN Straight Mitered Edge countertop overview.
Original source page 6, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective of a rectangular countertop with a straight deep front edge, one sink opening offset to the right, one faucet hole behind the opening and a full rear backsplash. The title identifies 2 IN Straight Mitered Edge; no dimension-line callouts occur on this page.
No dimension callouts are printed on this overview page.
Source page 7: Straight Mitered Edge countertop dimensions
View original PDF — Source page 7: Straight Mitered Edge countertop dimensions
Original drawing: Straight Mitered Edge countertop dimensions.
Original source page 7, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Separate backsplash elevation and side profile appear above the countertop edge elevation. Below them is a right-offset sink-opening plan with one round faucet hole and four small bracket-hole symbols. Horizontal chains separately locate the sink opening and bracket columns; vertical chains separately locate the opening and bracket rows. A narrow edge-section drawing is at the right.
Two leaders read 45 Degree Mitered Edge, at the edge elevation and lower-right plan corner. SINK BRACKET points to a bracket-hole symbol. The source says these dimensions apply exclusively to Straight Mitered Edge countertops and directs the reader to the separate Double Cove Edge section for that style.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Backsplash width | 36 | 914 | Full width of the separate backsplash elevation. |
| Backsplash height | 3-7/8 | 100 | Vertical height of the separate backsplash elevation. |
| Backsplash thickness | 3/4 | 20 | Width of the narrow backsplash side profile. |
| Edge elevation overall height | 2 | 50 | Full vertical height of the horizontal countertop edge elevation. |
| Edge elevation left return | 3/4 | 20 | Short horizontal return at the left end of the mitered-edge elevation. |
| Edge elevation right return | 3/4 | 20 | Short horizontal return at the right end of the mitered-edge elevation. |
| Top plan overall width | 36 | 914 | Full outside horizontal width of the countertop plan. |
| Left edge to faucet axis | 24 | 610 | Upper horizontal left span from the outside left edge to the faucet/sink axis. |
| Faucet axis to right edge | 12 | 304 | Upper horizontal right span from the faucet/sink axis to the outside right edge. |
| Top plan overall depth | 22 | 560 | Full outside front-to-back span of the plan. |
| Rear edge to opening | 5-1/2 | 140 | Upper left vertical segment from outside rear edge to opening rear edge. |
| Opening front-to-back depth | 12-1/4 | 310 | Middle vertical segment across the sink opening. |
| Opening to front edge | 4-3/8 | 110 | Lower vertical segment from opening front edge to outside front edge. |
| Rear edge to faucet center | 2-3/4 | 70 | Short vertical span from outside rear edge to round faucet-hole center. |
| Faucet-hole diameter | 1-3/8 | 35 | Diameter leader pointing to the round faucet hole. |
| Rear edge to rear bracket row | 6-3/4 | 170 | Upper internal vertical reference from rear edge to rear bracket-hole row. |
| Bracket row spacing | 9-7/8 | 250 | Internal vertical span between rear and front bracket-hole rows. |
| Front bracket row to front edge | 5-1/2 | 140 | Lower internal vertical reference from front bracket-hole row to outside front edge. |
| Left edge to opening left edge | 15-3/8 | 390 | Left segment of the lower opening-location horizontal chain. |
| Sink opening width | 17-3/8 | 440 | Middle horizontal segment across the opening. |
| Opening right edge to right edge | 3-1/4 | 84 | Right segment of the lower opening-location chain. |
| Left edge to left bracket column | 13-1/8 | 333 | Left segment of the bottom bracket-location chain. |
| Bracket column spacing | 21-3/4 | 554 | Middle horizontal span between bracket columns. |
| Right bracket column to right edge | 1-1/8 | 27 | Right segment of the bottom bracket-location chain. |
| Separate edge-section transverse span | 2 | 50 | Horizontal span above the narrow edge section to the right of the plan. |
| Separate edge-section upper wall | 3/4 | 20 | Short upper vertical wall span on the separate edge section. |
| Separate edge-section lower wall | 3/4 | 20 | Short lower vertical wall span on the separate edge section. |
| Opening corner label 4-R10 | Not printed separately | Not printed separately | The rounded-opening corner leader reads 4-R10; no separate unit is printed on that leader. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not recalculated or approved for installation.
Source page 8: Standard rectangular undermount sink
View original PDF — Source page 8: Standard rectangular undermount sink
Original drawing: Standard rectangular undermount sink.
Original source page 8, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The left drawing is a plan/section of a rectangular sink with a hatched surrounding flange and a sloped basin. A round opening is drawn near the rear inner area and a small oval feature near the front. The right drawing is a hatched side section with a curved bowl profile and a projecting flange. These features are illustrated without separate opening diameters. The five dimension callouts are reproduced below.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Sink: outside width | 20-1/8 | 511 | Full horizontal width across the outside sink/flange outline. |
| Sink: outside depth | 15 | 381 | Outer vertical depth across the sink/flange outline. |
| Sink: inner width | 17-3/4 | 451 | Horizontal span below the plan across the inside basin reference lines. |
| Sink: inner depth | 12-5/8 | 320.6 | Vertical span at the left across the inside basin reference lines. |
| Sink side section: vertical height | 7-5/8 | 193.6 | Vertical span from the flange/bottom reference to the uppermost section reference shown; no drain fitting dimensions are printed. |
Source note: The source says: All measurements are plus or minus 1/4 inch. This stated tolerance is retained as source information, not used to resolve conflicting unit labels.
Source page 9: 36 IN right offset 1.5 IN Double Cove Edge countertop overview
View original PDF — Source page 9: 36 IN right offset 1.5 IN Double Cove Edge countertop overview
Original drawing: 36 IN right offset 1.5 IN Double Cove Edge countertop overview.
Original source page 9, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Perspective of a rectangular countertop with a molded front edge and layered full rear backsplash. One rounded rectangular sink opening is offset to the right, with one round faucet hole behind it. The title identifies the 1.5 IN Double Cove Edge style. There are no separate dimension-line callouts on this overview page.
No dimension callouts are printed on this overview page.
Source page 10: Double Cove Edge countertop dimensions
View original PDF — Source page 10: Double Cove Edge countertop dimensions
Original drawing: Double Cove Edge countertop dimensions.
Original source page 10, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
Separate backsplash elevation and side profile appear above the countertop edge elevation. Below them is a right-offset sink-opening plan with one round faucet hole and four small bracket-hole symbols. Horizontal chains separately locate the sink opening and bracket columns; vertical chains separately locate the opening and bracket rows. A narrow edge-section drawing is at the right.
The plan includes a 1 in /25 mm rear inset and 2 in /50 mm left and front inset bands. SINK BRACKET points to a bracket-hole symbol. The source says these dimensions apply exclusively to Double Cove Edge countertops and directs the reader to the separate Straight Mitered Edge section for that style. The style title says 1.5 IN, while the detailed edge height reads 1-5/8 in /40 mm. The two labels are retained without a nominal-versus-actual interpretation.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Backsplash width | 33-7/8 | 860 | Full width of the separate backsplash elevation. |
| Backsplash height | 3-7/8 | 100 | Vertical height of the separate backsplash elevation. |
| Backsplash thickness | 3/4 | 20 | Width of the narrow backsplash side profile. |
| Edge elevation overall height | 1-5/8 | 40 | Full vertical height of the horizontal countertop edge elevation. |
| Edge elevation upper segment | 3/4 | 20 | Upper right vertical segment of the cove-edge elevation. |
| Edge elevation lower segment | 3/4 | 20 | Lower right vertical segment of the cove-edge elevation. |
| Top plan overall width | 36 | 914 | Full outside horizontal width of the countertop plan. |
| Left edge to faucet axis | 24 | 610 | Upper horizontal left span from the outside left edge to the faucet/sink axis. |
| Faucet axis to right edge | 12 | 304 | Upper horizontal right span from the faucet/sink axis to the outside right edge. |
| Top plan overall depth | 22 | 560 | Full outside front-to-back span of the plan. |
| Rear edge to opening | 5-1/2 | 140 | Upper left vertical segment from outside rear edge to opening rear edge. |
| Opening front-to-back depth | 12-1/4 | 310 | Middle vertical segment across the sink opening. |
| Opening to front edge | 4-3/8 | 110 | Lower vertical segment from opening front edge to outside front edge. |
| Rear edge to faucet center | 2-3/4 | 70 | Short vertical span from outside rear edge to round faucet-hole center. |
| Faucet-hole diameter | 1-3/8 | 35 | Diameter leader pointing to the round faucet hole. |
| Rear edge to rear bracket row | 6-3/4 | 170 | Upper internal vertical reference from rear edge to rear bracket-hole row. |
| Bracket row spacing | 9-7/8 | 250 | Internal vertical span between rear and front bracket-hole rows. |
| Front bracket row to front edge | 5-1/2 | 140 | Lower internal vertical reference from front bracket-hole row to outside front edge. |
| Left edge to opening left edge | 15-3/8 | 390 | Left segment of the lower opening-location horizontal chain. |
| Sink opening width | 17-3/8 | 440 | Middle horizontal segment across the opening. |
| Opening right edge to right edge | 3-1/4 | 84 | Right segment of the lower opening-location chain. |
| Left edge to left bracket column | 13-1/8 | 333 | Left segment of the bottom bracket-location chain. |
| Bracket column spacing | 21-3/4 | 554 | Middle horizontal span between bracket columns. |
| Right bracket column to right edge | 1-1/8 | 27 | Right segment of the bottom bracket-location chain. |
| Rear inset reference | 1 | 25 | Short vertical span from rear outside edge to dashed inset line. |
| Left inset band | 2 | 50 | Short horizontal span across the left inset band of the plan. |
| Front inset band | 2 | 50 | Short vertical span across the front inset band of the plan. |
| Separate edge-section transverse span | 1-5/8 | 40 | Horizontal span above the narrow edge section to the right of the plan. |
| Opening corner label 4-R20 | Not printed separately | Not printed separately | The rounded-opening corner leader reads 4-R20; no separate unit is printed on that leader. |
Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not recalculated or approved for installation.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.