Miami 30 vanity - drawing text version
Miami 30 vanity - source drawing text version
PDF with text descriptions — 5 pages.
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text equivalent of the original one-page drawing. Every printed dimension callout is transcribed independently without correcting, converting or approving engineering values. Source drawing commands and dimension labels are preserved. This companion does not establish installation dimensions or included accessories.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.
Source limitations
Inches and millimeters are retained as separately printed source values, not treated as exact conversions. The drawing does not identify a controlling unit, dimensional tolerance or current engineering approval.
All 39 printed callouts are transcribed, including repeated measurements and four inch-only corner-radius labels. No radius conversion is added.
The document does not identify a drawing revision, current approval status or the accessories included with a selected product configuration.
Source page 1: Miami 30 vanity drawing views
View original PDF — Source page 1: Miami 30 vanity drawing views
Original drawing: Miami 30 vanity drawing views.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The sheet is labeled MIA-30 inches. The upper row shows front, side and rear elevations. Below are the cabinet plan at left, an undimensioned cabinet perspective at right, and a countertop plan with a separate narrow edge view at the lower left. The cabinet has a rounded front, vertical decorative grooves, three stacked fronts and short cylindrical leg/foot references.
The cabinet is labeled 742 mm [29.2 in] wide, 550 mm [21.7 in] deep and 850 mm [33.5 in] high. The front divides into three 219 mm [8.7 in] sections; a separate vertical chain is 718 mm [28.3 in] for the body reference and 132 mm [5.2 in] below it. The side view has three internal vertical references of 96 mm [3.8 in], 116 mm [4.6 in] and 116 mm [4.6 in].
The rear view has a central rounded rectangular opening. Its horizontal chain is 261 mm [10.25 in], 220 mm [8.7 in], 261 mm [10.25 in]. Its vertical chain is 186 mm [7.3 in] above the opening, 270 mm [10.6 in] opening height and 394 mm [15.6 in] below to the foot/floor reference. The cabinet plan shows a central U-shaped rear/internal interruption, an inner front-to-back reference of 410 mm [16 in], and separate R3.5-inch leaders at the two front corners. The interruption itself has no width or depth label.
The countertop plan is 762 mm [30 in] wide by 560 mm [22 in] deep, with a centered rectangular sink opening and one round faucet hole behind it. The width is divided into two 381 mm [15 in] halves. The opening width chain is 161 mm [6.3 in], 440 mm [17.4 in], 161 mm [6.3 in]; the depth chain is 140 mm [5.5 in], 310 mm [12.2 in], 110 mm [4.3 in]. The faucet center is 70 mm [2.8 in] from the rear edge, and its diameter is labeled 35 mm [1.4 in]. R4-inch leaders mark both outside front countertop corners. A separate narrow rectangular profile has a transverse span labeled 50 mm [2 in]; its function is not explicitly labeled.
Radius labels are provided only in inches. Their millimeter cells explicitly say Not printed; no conversion or missing size is invented. The perspective illustrates appearance and does not independently approve dimensions or items included in a purchase.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Inches | Millimeters | Reference points / meaning |
|---|---|---|---|
| Front: overall cabinet width | 29.2 | 742 | Horizontal span above the front elevation across its outside edges. |
| Front: overall height | 33.5 | 850 | Outer vertical dimension from the upper cabinet edge to the foot/floor reference. |
| Front: cabinet-body vertical span | 28.3 | 718 | Inner vertical dimension on the left, from the upper cabinet reference to the lower body/base reference. |
| Front: lower foot span | 5.2 | 132 | Short lower vertical span on the left between the bottom body reference and the floor/foot line. |
| Front: upper front height | 8.7 | 219 | One of three separate right-side vertical callouts across the upper front section, as drawn. |
| Front: middle front height | 8.7 | 219 | One of three separate right-side vertical callouts across the middle front section, as drawn. |
| Front: lower front height | 8.7 | 219 | One of three separate right-side vertical callouts across the lower front section, as drawn. |
| Side: cabinet depth | 21.7 | 550 | Horizontal span above the side elevation from back to front outside references. |
| Side: overall height | 33.5 | 850 | Vertical dimension left of the side elevation from the cabinet top to the bottom foot reference. |
| Side: upper internal box span | 3.8 | 96 | Upper short vertical interior reference within the side elevation; follows the endpoints shown rather than an inferred exterior front height. |
| Side: middle internal box span | 4.6 | 116 | Middle short vertical interior reference within the side elevation. |
| Side: lower internal box span | 4.6 | 116 | Lower short vertical interior reference within the side elevation. |
| Rear: overall cabinet width | 29.2 | 742 | Full horizontal span above the rear elevation. |
| Rear: left edge to opening | 10.25 | 261 | Left segment of the rear horizontal chain, outside edge to the left opening reference. |
| Rear: opening width | 8.7 | 220 | Middle segment of the rear horizontal chain between the two opening-side references. |
| Rear: opening to right edge | 10.25 | 261 | Right segment of the rear horizontal chain, opening reference to the outside edge. |
| Rear: upper edge to opening | 7.3 | 186 | Upper vertical segment beside the rear elevation, top reference to the opening top reference. |
| Rear: opening height | 10.6 | 270 | Middle vertical segment spanning the rectangular rear opening. |
| Rear: below opening to floor | 15.6 | 394 | Lower vertical segment from the opening bottom reference to the bottom foot/floor reference. |
| Cabinet plan: overall width | 29.2 | 742 | Horizontal span across the cabinet plan outside edges. |
| Cabinet plan: overall depth | 21.7 | 550 | Outside front-to-back depth shown at the left of the plan. |
| Cabinet plan: inner front-to-back span | 16 | 410 | Vertical span at the right inside the cabinet plan, from the rear internal reference to the front internal reference. |
| Cabinet plan: left front corner radius | R3.5 | Not printed | Radius leader at the rounded outside front-left corner. Only an inch radius is printed; no millimeter value is supplied. |
| Cabinet plan: right front corner radius | R3.5 | Not printed | Separate radius leader at the rounded outside front-right corner. Only an inch radius is printed. |
| Countertop plan: outside width | 30 | 762 | Top horizontal dimension across the full countertop width. |
| Countertop plan: left edge to faucet axis | 15 | 381 | Left half-width span from the outer edge to the central faucet/sink axis. |
| Countertop plan: faucet axis to right edge | 15 | 381 | Right half-width span from the central axis to the outside right edge. |
| Countertop plan: outside depth | 22 | 560 | Outer front-to-back dimension on the left side of the countertop plan. |
| Countertop plan: rear edge to sink opening | 5.5 | 140 | Upper left vertical segment from rear outside edge to the sink-opening rear edge. |
| Countertop plan: sink opening depth | 12.2 | 310 | Middle vertical segment spanning the sink opening from rear to front. |
| Countertop plan: opening to front edge | 4.3 | 110 | Lower left vertical segment from opening front edge to countertop front edge. |
| Countertop plan: left edge to opening | 6.3 | 161 | Bottom left horizontal segment from the countertop outside edge to the sink-opening left edge. |
| Countertop plan: sink opening width | 17.4 | 440 | Middle bottom horizontal segment spanning the rectangular sink opening. |
| Countertop plan: opening to right edge | 6.3 | 161 | Bottom right horizontal segment from sink-opening right edge to outside countertop edge. |
| Countertop plan: rear edge to faucet center | 2.8 | 70 | Short vertical span near the faucet symbol, from the rear countertop edge to the hole center. |
| Countertop plan: faucet-hole diameter | 1.4 | 35 | Diameter symbol points to the single round faucet hole. The diameter sign is retained in this description. |
| Countertop plan: left front corner radius | R4 | Not printed | Radius leader at the rounded outside front-left countertop corner; no millimeter equivalent is printed. |
| Countertop plan: right front corner radius | R4 | Not printed | Separate radius leader at the rounded outside front-right countertop corner; no millimeter equivalent is printed. |
| Separate narrow profile: transverse span | 2 | 50 | Horizontal dimension across the separate narrow vertical rectangular profile beside the countertop plan. Its function is not explicitly labeled; no thickness or backsplash interpretation is added. |
Source note: All 39 printed callouts are transcribed, including repeated measurements and four inch-only corner-radius labels. No radius conversion is added.
Source note: The document does not identify a drawing revision, current approval status or the accessories included with a selected product configuration.
Source and assistance
View the original source PDF. Source reviewed 19 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.