Wishlist

Miami_Spec_36L.pdf — drawing text version

Miami_Spec_36L.pdf - source drawing text companion

PDF with text descriptions — 6 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of Miami_Spec_36L.pdf. Printed callouts and individual reference relationships are retained without changing or approving engineering dimensions.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Parenthesized values retain their printed paired tick marks. Unparenthesized values and radius callouts are reproduced separately. The sheet has no explicit unit legend, so no unit or controlling value is inferred and no conversion is performed.

Source limitations

Parenthesized values retain their printed paired tick marks. Unparenthesized values and radius callouts are reproduced separately. The sheet has no explicit unit legend, so no unit or controlling value is inferred and no conversion is performed.

The source does not state a revision, dimensional tolerance, controlling unit, current approval status or the components included with a selected product configuration. Separate cabinet and countertop drawings are retained without combining their dimensions.

Corner-radius labels R3.5`` and R4`` are reproduced as unparenthesized callouts. No converted radius or inferred unit is added.

Source page 1: Cabinet elevations and plan, perspective, countertop plan and narrow profile

View original PDF — Source page 1: Cabinet elevations and plan, perspective, countertop plan and narrow profile

Original drawing: Cabinet elevations and plan, perspective, countertop plan and narrow profile.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The upper-left front elevation shows two tall door fronts on the left and three stacked drawer fronts on the right, closely spaced vertical decorative grooves, rounded cap edges and lower supports. The upper and lower cabinet-body references, overall height, drawer-face heights and lower interior reference remain separate.

The upper-middle side elevation includes faint internal drawer outlines and three separate drawer-box height references. The cabinet depth and height are labelled separately from the front elevation.

The upper-right rear elevation shows a rectangular opening toward the left and one lower circular feature on the opposite side. Its upper width chain locates the rectangular opening; the lower chain locates the circular-feature axis or axes. The vertical chain measures to the rectangular opening edges and lower foot reference.

The middle-left cabinet plan shows a broad left bay and a narrow right bay, a separate internal depth reference and two rounded front corners. The unlabelled perspective drawing at the right shows the grooved cabinet body, open top, front divisions and cylindrical supports.

The separate countertop plan at lower left has a rectangular opening toward the left, a small round hole behind it and rounded front corners. Its depth and width chains, round-hole diameter and rear offset are all printed. A narrow rectangular profile beside it has a width callout but no stated function.

The visible title is MIA-36L``. The file identity is Miami_Spec_36L.pdf. No current finish, material, included accessory list or engineering approval is stated on this sheet.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Parenthesized value Unparenthesized value Reference points / meaning
Front: overall cabinet width 35.2`` 894 Full horizontal span across the cabinet upper cap in the front elevation.
Front: left door width 12.1`` 306 Separate upper width-chain span across the left door between the shown front references.
Front: second door width 12.1`` 306 Separate upper width-chain span across the second door between the shown front references.
Front: right drawer column width 10`` 256 Separate upper width-chain span across the right drawer column between the shown front references.
Front: overall cabinet height 33.5`` 850 Outer vertical span from the top of the cabinet cap to the lower foot reference; the separate countertop plan is not added to this height.
Front: cabinet body vertical span 28.3`` 718 Upper vertical segment from the top cap reference to the lower body-rail reference.
Front: lower support span 5.2`` 132 Lower vertical segment from the body-rail reference to the lower foot reference.
Front: lower interior reference 9.8`` 250 Vertical span from the lower front-panel reference to the dashed horizontal interior reference.
Front: upper drawer front height 6.7`` 170 Vertical span across the shown upper drawer front; the repeated 170 labels remain separate.
Front: middle drawer front height 6.7`` 170 Vertical span across the shown middle drawer front; the repeated 170 labels remain separate.
Front: lower drawer front height 12.4`` 316 Vertical span across the shown lower drawer front; the repeated 170 labels remain separate.
Side: overall cabinet depth 21.7`` 550 Upper horizontal span across the side elevation.
Side: overall cabinet height 33.5`` 850 Outer vertical span from the top cap to the lower foot reference.
Side: upper internal drawer-box reference 2.6`` 66 Separate internal vertical span marked beside the upper internal drawer-box.
Side: middle internal drawer-box reference 3.8`` 96 Separate internal vertical span marked beside the middle internal drawer-box.
Side: lower internal drawer-box reference 9.4`` 240 Separate internal vertical span marked beside the lower internal drawer-box.
Rear: overall cabinet width 35.2`` 894 Full horizontal span across the cabinet upper cap in the rear elevation.
Rear: left edge to rectangular opening 8.25`` 210 Upper width-chain span from the outside left edge to the left side of the rectangular opening.
Rear: rectangular opening width 8.7`` 220 Upper width-chain span from the left side to the right side of the rectangular opening.
Rear: opening to right edge 18.25`` 464 Upper width-chain span from the right side of the rectangular opening to the outside right edge.
Rear: upper opening offset 7.3`` 186 Top cabinet reference to the upper edge of the rectangular rear opening.
Rear: rectangular opening height 10.6`` 270 Vertical span between the upper and lower edges of the rectangular rear opening.
Rear: lower opening offset 15.6`` 394 Lower edge of the rectangular rear opening to the lower foot reference.
Rear: circular-feature center height 13.3`` 338 Lower foot reference to the horizontal center level of the lower circular rear feature or features.
Rear: left edge to circular-feature axis 29.6`` 751 Lower horizontal-chain reference for left edge to circular feature axis; no circular-feature diameter is printed in this rear view.
Rear: circular-feature axis to right edge 5.6`` 143 Lower horizontal-chain reference for circular feature axis to right edge; no circular-feature diameter is printed in this rear view.
Cabinet plan: overall width 35.2`` 894 Full upper horizontal span across the cabinet plan.
Cabinet plan: broad left internal bay width 23`` 585 Inner horizontal reference across the broad left internal bay.
Cabinet plan: narrow right internal bay width 8.9`` 225 Inner horizontal reference across the narrow right internal bay.
Cabinet plan: overall depth 21.7`` 550 Outer vertical span from the rear to the front cabinet-plan references.
Cabinet plan: narrow-bay internal depth 16`` 410 Internal front-to-rear span drawn in the right narrow bay; it is separate from the overall cabinet depth.
Cabinet plan: left front corner radius — R3.5`` Leader points to the rounded left front corner of the cabinet plan.
Cabinet plan: right front corner radius — R3.5`` Leader points to the rounded right front corner of the cabinet plan.
Countertop plan: overall width 36`` 914 Full upper horizontal span across the separate countertop plan.
Countertop plan: left edge to round-hole axis 13`` 330 Upper split-width reference from the outside left edge to the round-hole center axis.
Countertop plan: round-hole axis to right edge 23`` 584 Upper split-width reference from the round-hole center axis to the outside right edge.
Countertop plan: round-hole diameter 1.4`` Ø35 Diameter leader identifies the small round hole; the diameter symbol is visibly printed before 35.
Countertop plan: round-hole rear offset 2.8`` 70 Short vertical span from the rear edge to the round-hole center.
Countertop plan: overall depth 22`` 560 Outside vertical span from the rear edge to the front edge.
Countertop plan: rear edge to rectangular opening 5.5`` 140 Upper part of the depth chain, from the rear edge to the upper side of the rectangular opening.
Countertop plan: rectangular opening depth 12.2`` 310 Middle depth-chain span between the upper and lower sides of the rectangular opening.
Countertop plan: opening to front edge 4.3`` 110 Lower depth-chain span from the lower side of the rectangular opening to the outside front edge.
Countertop plan: left edge to opening 4.3`` 110 Lower horizontal-chain span from the outside left edge to the left side of the opening.
Countertop plan: rectangular opening width 17.4`` 440 Lower horizontal-chain span from the left side to the right side of the rectangular opening.
Countertop plan: opening to right edge 14.3`` 364 Lower horizontal-chain span from the right side of the opening to the outside right edge.
Countertop plan: left front corner radius — R4`` Leader points to the rounded left front corner of the countertop plan.
Countertop plan: right front corner radius — R4`` Leader points to the rounded right front corner of the countertop plan.
Separate narrow profile: width 2`` 50 Horizontal span across the narrow rectangle to the right of the countertop plan. The source does not label the function of this separate profile.

Source note: Repeated dimension labels retain their original view and reference points. Front drawer-face heights differ from the internal side-view drawer-box references.

Source note: The distinct cabinet upper width, cabinet internal bay widths and countertop width are retained without treating one as a replacement for another.

Source note: The 50(2``) label belongs to the separate narrow profile; it is not identified here as countertop thickness.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.