Miami 60D - drawing text version
Download drawings and text (PDF)
Miami 60D - text companion
This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.
All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.
Text version of the exact Miami_Spec_60D.pdf source sheet. This transcription does not change the original drawing or establish material, current product fit, engineering approval or installation instructions.
Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Values bearing the source's two quote-like marks appear in the Quoted value column; those marks are omitted in the table. Where a label has a leading value and a parenthesized quoted value, both are kept in the same row. The four small-opening labels on the countertop are printed separately: quoted labels at the left opening, leading labels at the right. They remain separate rows, and a missing counterpart is marked Not printed. The source gives no separate unit legend for leading values. No unit conversion, pairing across different features, or rounding correction is inferred.
Source limitations
The source title reads MIA-60D with two trailing quote-like marks. Cabinet and countertop drawings have different outer dimensions; their labels are retained independently.
The left countertop circular-opening leader is labeled 1.4 with quote-like marks but no diameter symbol; the right leader is labeled with a diameter symbol and 35. They are not combined into an invented paired label.
The front elevation includes four separately printed 302 (11.9) spans around a 264 (10.4) central span. All repeated labels remain separate entries.
Source page 1: Cabinet elevations and plan, double-opening countertop plan and perspective
Original drawing: Cabinet elevations and plan, double-opening countertop plan and perspective.
Original source page 1, visually unchanged. Read this page's text equivalent.
View and dimensional relationships
The upper row shows the front elevation at left, a narrow side elevation in the middle, and the rear elevation at right. The front has two wider paired-panel areas separated by a narrow central stack with three fronts. Fine vertical lines run across the front and side faces. The base stands on separate feet.
The rear view shows a broad rectangular panel with two rectangular openings at the same level and one small circular feature centered below and between them. Horizontal and vertical dimension chains locate those features. The source does not name the rear openings or state the circular rear feature's diameter.
The middle-left cabinet plan has three internal bays: a wider compartment at each end and a narrow center bay. Its front outer corners are rounded. The perspective at right shows the front, side, open top and separate feet without dimension labels.
The lower-left drawing is a separate countertop plan with a straight rear edge, rounded front corners, two large rounded-rectangle openings and one small circular opening behind each large opening. A narrow side profile is drawn to its right. The left small-opening labels use quote-like marks; the right small-opening labels are separate leading values. Cabinet and countertop labels are not interchangeable.
On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.
| Measurement | Quoted value | Leading value | Reference points / meaning |
|---|---|---|---|
| Front: overall width | 59.2 | 1504 | Full horizontal span across the outer ends of the upper rail. |
| Front: upper horizontal span 1 of 5 | 11.9 | 302 | One of five separately printed upper horizontal spans, ordered from the left outer reference to the right outer reference. The printed paired values are retained independently without recalculation. |
| Front: upper horizontal span 2 of 5 | 11.9 | 302 | One of five separately printed upper horizontal spans, ordered from the left outer reference to the right outer reference. The printed paired values are retained independently without recalculation. |
| Front: upper horizontal span 3 of 5 | 10.4 | 264 | One of five separately printed upper horizontal spans, ordered from the left outer reference to the right outer reference. The printed paired values are retained independently without recalculation. |
| Front: upper horizontal span 4 of 5 | 11.9 | 302 | One of five separately printed upper horizontal spans, ordered from the left outer reference to the right outer reference. The printed paired values are retained independently without recalculation. |
| Front: upper horizontal span 5 of 5 | 11.9 | 302 | One of five separately printed upper horizontal spans, ordered from the left outer reference to the right outer reference. The printed paired values are retained independently without recalculation. |
| Front: overall height | 33.5 | 850 | Full vertical span from the foot baseline to the upper rail reference; no separate countertop is shown in this elevation. |
| Front: upper vertical span | 28.3 | 718 | Left vertical span from the upper rail reference to the lower rail reference. |
| Front: lower vertical span | 5.2 | 132 | Left vertical span from the foot baseline to the lower rail reference. |
| Front: upper drawer-front span | 6.7 | 170 | Upper of the two consecutive equal vertical spans printed beside the narrow central stack in the front view. |
| Front: middle drawer-front span | 6.7 | 170 | Lower of the two consecutive equal vertical spans printed beside the narrow central stack in the front view. |
| Front: lower drawer-front span | 12.4 | 316 | Separate lower vertical span beside the narrow central stack, below the two equal upper spans. |
| Front: lower internal reference height | 9.8 | 250 | Vertical span from the lower front-face edge to a short horizontal reference inside the right-hand panel area. The source does not name that reference or identify it as an installation height. |
| Side: overall depth | 21.7 | 550 | Full horizontal span across the side-view upper rail. |
| Side: overall height | 33.5 | 850 | Vertical span from the foot baseline to the upper rail reference. |
| Side: upper internal span | 3 | 76 | Upper local vertical span within the side-view internal outlines. |
| Side: middle internal span | 3.8 | 96 | Middle local vertical span within the side-view internal outlines. |
| Side: lower internal span | 9.4 | 240 | Lower local vertical span within the side-view internal outlines. The three local spans are not a complete overall-height chain. |
| Rear: overall width | 59.2 | 1504 | Full horizontal span across the outer ends of the upper rail. |
| Rear: left opening offset | 8 | 204 | Upper horizontal dimension chain. From the left outer reference to the left edge of the left rectangular opening. |
| Rear: left rectangular opening width | 8.7 | 220 | Upper horizontal dimension chain. Between the left and right edges of the left rectangular opening. |
| Rear: space between openings | 25.8 | 656 | Upper horizontal dimension chain. From the right edge of the left rectangular opening to the left edge of the right rectangular opening. |
| Rear: right rectangular opening width | 8.7 | 220 | Upper horizontal dimension chain. Between the left and right edges of the right rectangular opening. |
| Rear: right opening offset | 8 | 204 | Upper horizontal dimension chain. From the right edge of the right rectangular opening to the right outer reference. |
| Rear: upper opening offset | 7.3 | 186 | Upper left vertical span from the upper rail reference to the top-edge level of the rectangular openings. |
| Rear: rectangular opening height | 10.6 | 270 | Middle left vertical span between the top-edge and bottom-edge levels of the rectangular openings. One height label is printed for these aligned openings. |
| Rear: lower opening offset | 15.6 | 394 | Lower left vertical span from the foot baseline to the bottom-edge level of the rectangular openings. |
| Rear: left half-width reference | 29.6 | 752 | Lower horizontal span from the left outer reference to the centerline of the single circular feature. |
| Rear: right half-width reference | 29.6 | 752 | Lower horizontal span from the circular-feature centerline to the right outer reference. |
| Rear: circular-feature level | 13.3 | 338 | Vertical span from the foot baseline to the centerline level of the single circular rear feature. Its diameter is not labeled. |
| Cabinet plan: overall width | 59.2 | 1504 | Full horizontal span across the cabinet plan outer envelope. |
| Cabinet plan: internal width 1 of 3 | 22.7 | 577 | One of three separately printed local horizontal bay widths, ordered from left to right between the indicated internal references. These widths exclude intervening frame widths. |
| Cabinet plan: internal width 2 of 3 | 9.8 | 248 | One of three separately printed local horizontal bay widths, ordered from left to right between the indicated internal references. These widths exclude intervening frame widths. |
| Cabinet plan: internal width 3 of 3 | 22.7 | 577 | One of three separately printed local horizontal bay widths, ordered from left to right between the indicated internal references. These widths exclude intervening frame widths. |
| Cabinet plan: overall depth | 21.7 | 550 | Full vertical span from the rear outer edge to the front outer edge in the plan. |
| Cabinet plan: center bay internal depth | 16 | 410 | Vertical span inside the narrow center bay between the indicated inner references. |
| Cabinet plan: left front corner radius | R3.5 | Not printed | Leader points to the rounded left front corner. R is retained as the printed radius prefix; no leading counterpart is printed. |
| Cabinet plan: right front corner radius | R3.5 | Not printed | Leader points to the rounded right front corner. R is retained as the printed radius prefix; no leading counterpart is printed. |
| Countertop plan: overall width | 60 | 1524 | Full horizontal span across the countertop outer envelope. |
| Countertop plan: left circular-opening offset | 12.8 | 324 | Upper horizontal span from the left outer edge to the centerline through the left small circular opening. |
| Countertop plan: circular-opening spacing | 34.4 | 876 | Upper horizontal span between the centerlines through the two small circular openings. |
| Countertop plan: right circular-opening offset | 12.8 | 324 | Upper horizontal span from the right circular-opening centerline to the right outer edge. |
| Countertop plan: overall depth | 22 | 560 | Full vertical span from the straight rear edge to the front outer edge. |
| Countertop plan: rear rectangular-opening offset | 5.5 | 140 | Upper left vertical span from the rear outer edge to the upper-edge level of the rectangular openings. |
| Countertop plan: rectangular opening depth | 12.2 | 310 | Middle left vertical span between the upper-edge and lower-edge levels of the rectangular openings. One depth label is printed for these aligned openings. |
| Countertop plan: front rectangular-opening offset | 4.3 | 110 | Lower left vertical span from the lower-edge level of the rectangular openings to the front outer edge. |
| Countertop plan: left opening offset | 4 | 104 | Lower horizontal dimension chain. From the left outer edge to the left edge of the left rectangular opening. |
| Countertop plan: left rectangular opening width | 17.4 | 440 | Lower horizontal dimension chain. Between the left and right edges of the left rectangular opening. |
| Countertop plan: space between rectangular openings | 17.2 | 436 | Lower horizontal dimension chain. From the right edge of the left rectangular opening to the left edge of the right rectangular opening. |
| Countertop plan: right rectangular opening width | 17.4 | 440 | Lower horizontal dimension chain. Between the left and right edges of the right rectangular opening. |
| Countertop plan: right opening offset | 4 | 104 | Lower horizontal dimension chain. From the right edge of the right rectangular opening to the right outer edge. |
| Countertop plan: left circular opening rear offset | 2.8 | Not printed | Short vertical dimension beside the left small circular opening, from the rear outer edge to its center. Only the quoted value is printed at this position; it is not paired with the separate right-opening label. |
| Countertop plan: left circular opening leader label | 1.4 | Not printed | Leader points to the left small circular opening. This left-hand label contains the quoted value without a printed diameter symbol; no leading counterpart is printed beside it. |
| Countertop plan: right circular opening rear offset | Not printed | 70 | Short vertical dimension beside the right small circular opening, from the rear outer edge to its center. Only this leading value is printed at this position; no quoted counterpart is printed beside it. |
| Countertop plan: right circular opening diameter | Not printed | Diameter 35 | Leader marked with a diameter symbol points to the right small circular opening. The symbol is written out as Diameter. No quoted counterpart is printed beside this right-hand label. |
| Countertop plan: left front corner radius | R4 | Not printed | Leader points to the rounded left front corner. R is retained as the printed radius prefix; no leading counterpart is printed. |
| Countertop plan: right front corner radius | R4 | Not printed | Leader points to the rounded right front corner. R is retained as the printed radius prefix; no leading counterpart is printed. |
| Countertop profile: horizontal thickness span | 2 | 50 | Horizontal dimension across the narrow rectangular profile drawn immediately to the right of the countertop plan. |
Source note: Every printed dimension callout on this sheet remains a separate row, including repeated values and the four unpaired small-opening labels. No dimensions are supplied for unlabeled features.
Source and assistance
View the original source PDF. Source reviewed 21 November 2026.
Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.