Wishlist

Miami 60S - drawing text version

Download drawings and text (PDF)

Miami 60S source drawing - text companion

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text version of the exact Miami_Spec_60S.pdf source sheet. This transcription does not change the original drawing or establish material, current product fit, engineering approval or installation instructions.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Paired labels are reproduced as printed, with the parenthesized value in the first column and the leading value in the second. The source uses two quote-like marks after parenthesized values and radius values; those repeated marks are omitted in the table. It does not provide a separate unit legend for the leading values. No unit conversion or rounding correction is inferred.

Source limitations

The source title reads MIA-60S with two trailing quote-like marks. The separate cabinet and countertop drawings have different outer dimensions; their labels are retained independently.

The circular opening is labeled with a diameter symbol; the table writes out that symbol as Diameter.

Source page 1: Cabinet elevations and plan, countertop plan and perspective

View original PDF — Source page 1: Cabinet elevations and plan, countertop plan and perspective

Original drawing: Cabinet elevations and plan, countertop plan and perspective.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The upper row contains the front elevation on the left, a narrow side elevation in the middle, and the rear elevation on the right. The front has two tall central panels and three horizontal drawer fronts on each side. Fine vertical lines cover the front and side faces. The base stands on separate feet.

The rear view has a broad rectangular back panel with a centered rectangular opening and two smaller circular features below it. Dimension chains locate the central opening and the two circular-feature centerlines. The source does not name these rear features or give the circular-feature diameters.

The middle-left cabinet plan has three main internal bays: a broad center compartment and narrower side bays. The outer front corners are rounded. A perspective view at the right shows the front, side, open top and separate feet; it has no dimension labels.

The lower-left drawing is a separate countertop plan with a straight rear edge, rounded front corners, a central rounded-rectangle opening and a smaller circular opening behind it. A narrow rectangular side profile is drawn to its right. Labels for the cabinet and countertop are not interchangeable.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Quoted value Leading value Reference points / meaning
Front: overall width 59.2 1504 Full horizontal span across the outer ends of the upper rail.
Front: left drawer bay width 14.5 369 One of four separately printed equal upper horizontal spans, in left-to-right order.
Front: left center panel width 14.5 369 One of four separately printed equal upper horizontal spans, in left-to-right order.
Front: right center panel width 14.5 369 One of four separately printed equal upper horizontal spans, in left-to-right order.
Front: right drawer bay width 14.5 369 One of four separately printed equal upper horizontal spans, in left-to-right order.
Front: overall height 33.5 850 Full vertical span from the foot baseline to the upper rail reference; no separate countertop is shown in this elevation.
Front: upper vertical span 28.3 718 Left vertical span from the upper rail reference to the lower rail reference.
Front: lower vertical span 5.2 132 Left vertical span from the foot baseline to the lower rail reference.
Front: upper drawer-front span 6.7 170 Upper of the two consecutive equal vertical spans printed at the right side of the front view.
Front: middle drawer-front span 6.7 170 Lower of the two consecutive equal vertical spans printed at the right side of the front view.
Front: lower drawer-front span 12.4 316 Separate lower vertical span on the right side, below the two equal upper spans.
Front: central panel reference height 9.8 250 Vertical span from the lower front-face edge to the small upper horizontal reference inside the right central panel. The source does not name this reference or identify it as an installation height.
Side: overall depth 21.7 550 Full horizontal span across the side-view upper rail.
Side: overall height 33.5 850 Vertical span from the foot baseline to the upper rail reference.
Side: upper internal span 3 76 Upper local vertical span within the side-view internal outlines.
Side: middle internal span 3.8 96 Middle local vertical span within the side-view internal outlines.
Side: lower internal span 9.4 240 Lower local vertical span within the side-view internal outlines. These three local spans are not a complete overall-height chain.
Rear: overall width 59.2 1504 Full horizontal span across the outer ends of the upper rail.
Rear: left opening offset 25.25 642 Upper horizontal span from the left outer reference to the left edge of the central rectangular opening.
Rear: rectangular opening width 8.7 220 Upper horizontal span between the left and right edges of the central rectangular opening.
Rear: right opening offset 25.25 642 Upper horizontal span from the right edge of the central rectangular opening to the right outer reference.
Rear: upper opening offset 7.3 186 Upper left vertical span from the upper rail reference to the top edge of the rectangular opening.
Rear: rectangular opening height 10.6 270 Middle left vertical span between the top and bottom edges of the rectangular opening.
Rear: lower opening offset 15.6 394 Lower left vertical span from the foot baseline to the bottom edge of the rectangular opening.
Rear: left circular-feature offset 7.9 201 Lower horizontal span from the left outer reference to the centerline of the left circular feature.
Rear: circular-feature spacing 43.4 1102 Lower horizontal span between the centerlines of the two circular features.
Rear: right circular-feature offset 7.9 201 Lower horizontal span from the right circular-feature centerline to the right outer reference.
Rear: circular-feature level 13.3 338 Right vertical span from the foot baseline to the horizontal centerline level of the two circular features. Their diameters are not labeled.
Cabinet plan: overall width 59.2 1504 Full horizontal span across the cabinet plan outer envelope.
Cabinet plan: left internal width 13.3 339 Left local horizontal span across the left bay, between the indicated internal references.
Cabinet plan: center internal width 28.5 724 Middle local horizontal span across the central compartment, between the indicated internal references.
Cabinet plan: right internal width 13.3 339 Right local horizontal span across the right bay, between the indicated internal references. These local spans exclude intervening frame widths.
Cabinet plan: overall depth 21.7 550 Full vertical span from the rear outer edge to the front outer edge in the plan.
Cabinet plan: left bay internal depth 16 410 Vertical span inside the left rectangular bay, between the indicated inner references.
Cabinet plan: left front corner radius R3.5 Not printed Leader points to the rounded left front corner. R is retained as the printed radius prefix; no leading counterpart is printed.
Cabinet plan: right front corner radius R3.5 Not printed Leader points to the rounded right front corner. R is retained as the printed radius prefix; no leading counterpart is printed.
Countertop plan: overall width 60 1524 Full horizontal span across the countertop outer envelope.
Countertop plan: left half-width 30 762 Horizontal span from the left outer edge to the centerline through the small circular opening.
Countertop plan: right half-width 30 762 Horizontal span from the centerline through the small circular opening to the right outer edge.
Countertop plan: overall depth 22 560 Full vertical span from the straight rear edge to the front edge.
Countertop plan: rear opening offset 5.5 140 Upper left vertical span from the rear outer edge to the upper edge of the rectangular opening.
Countertop plan: rectangular opening depth 12.2 310 Middle left vertical span between the upper and lower edges of the rectangular opening.
Countertop plan: front opening offset 4.3 110 Lower left vertical span from the lower edge of the rectangular opening to the front outer edge.
Countertop plan: left opening offset 21.3 542 Lower horizontal span from the left outer edge to the left edge of the rectangular opening.
Countertop plan: rectangular opening width 17.4 440 Lower horizontal span between the left and right edges of the rectangular opening.
Countertop plan: right opening offset 21.3 542 Lower horizontal span from the right edge of the rectangular opening to the right outer edge.
Countertop plan: circular opening rear offset 2.8 70 Short vertical span from the rear outer edge to the center of the small circular opening.
Countertop plan: circular opening diameter 1.4 Diameter 35 Printed diameter-symbol callout points to the small circular opening. The symbol is written out as Diameter for text reading.
Countertop plan: left front corner radius R4 Not printed Leader points to the rounded left front corner. R is retained as the printed radius prefix; no leading counterpart is printed.
Countertop plan: right front corner radius R4 Not printed Leader points to the rounded right front corner. R is retained as the printed radius prefix; no leading counterpart is printed.
Countertop profile: horizontal thickness span 2 50 Horizontal dimension across the narrow rectangular profile drawn immediately to the right of the countertop plan.

Source note: All labels are reproduced from this one sheet. Repeated dimensions remain separate rows so their positions can be distinguished. No dimensions are supplied for unlabeled features.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 20 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 20 November 2026. This text version explains the source drawing; it is not a new installation specification.