Wishlist

Nashville_Spec_36R.pdf — drawing text version

Nashville 36R source drawing - source drawing text companion

PDF with text descriptions — 9 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the source file Nashville_Spec_36R.pdf. Printed values and separate view references are retained without changing or approving engineering dimensions.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Bracketed labels contain the inch mark and are reproduced in the Inches column. The separate unbracketed numbers are reproduced as Unbracketed value because no explicit unit label is printed for them. No conversion or controlling unit is inferred.

Source limitations

Bracketed labels contain the inch mark and are reproduced in the Inches column. The separate unbracketed numbers are reproduced as Unbracketed value because no explicit unit label is printed for them. No conversion or controlling unit is inferred.

The footer reads Solid Wood Construction Bathroom Vanity and the logo reads Willow Collections. These are source labels, not a new claim about the material or accessories supplied with any current product.

The countertop and cabinet drawings are separate views; the source filename does not override the printed center-axis dimension.

Source page 1: Countertop plan, separate slab elevation and cabinet perspective

View original PDF — Source page 1: Countertop plan, separate slab elevation and cabinet perspective

Original drawing: Countertop plan, separate slab elevation and cabinet perspective.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The upper-left plan shows a rectangular countertop, a rounded rectangular opening and a small faucet feature centered behind it. The source locates the faucet axis at 18 inches from the left outside edge. No faucet-hole diameter is printed. The upper-right view is a separate rectangular slab elevation.

The lower perspective shows an open-top cabinet with three stacked narrow drawer fronts at left and two doors at right. A narrow internal drawer box and a rear opening are visible. The cabinet perspective is separate from the centered countertop plan above; no different countertop axis is substituted from the source filename.

The source heading is TECHNICAL DRAWING. The filename identifies the Nashville 36R source; the visible sheet does not give a model-specific heading or a finish specification.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 1 dimensions, as printed
Measurement Inches Unbracketed value Reference points / meaning
Countertop plan: outside width 36 914 Full horizontal outside span above the rectangular countertop plan.
Countertop plan: left edge to faucet axis 18 457 Upper partial span from the left outside edge to the centered faucet-hole axis.
Countertop plan: outside depth 22 560 Full vertical outside span at the left of the plan.
Countertop plan: opening width 17-3/4 450 Horizontal span across the rounded rectangular opening.
Countertop plan: opening depth 12-1/2 320 Vertical span across the rounded rectangular opening.
Separate slab elevation: width 36 914 Horizontal span above the separate rectangular slab elevation at upper right.
Separate slab elevation: height 2 50 Short vertical span at the left of the separate slab elevation.
Cabinet perspective: width 35-1/4 894 Diagonal width reference across the open-top cabinet perspective.
Cabinet perspective: depth 21-3/4 550 Diagonal depth reference along the other top edge of the cabinet perspective.
Cabinet perspective: height 33-1/2 850 Vertical span beside the cabinet from the upper frame to the shown lower leg reference.

Source note: The countertop plan uses a centered 18-inch axis even though the cabinet faces have an asymmetric door/drawer arrangement. These separate printed views are retained without selecting a different countertop configuration.

Back to contents

Source page 2: Cabinet plan, front, exterior side, rear and internal side views

View original PDF — Source page 2: Cabinet plan, front, exterior side, rear and internal side views

Original drawing: Cabinet plan, front, exterior side, rear and internal side views.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Five views are arranged on this page: cabinet plan above; front and exterior side in the middle row; rear and internal side below. The front shows three stacked narrow drawer fronts at left and two doors at right. The side views use separate upper and lower frame references.

The plan has a broad bay and a narrow box. Its width and depth callouts refer to distinct outer and inner outlines. The rear elevation shows an upper panel, a broad middle open area divided by an upright reference, and a lower rail. The lower-right side view adds three dashed internal box outlines and their heights.

Dimensions with the same printed value remain separate when they measure different reference spans. Front upper-rail label 30 and side upper-rail label 50 are both retained; no equality is imposed across different views.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Inches Unbracketed value Reference points / meaning
Cabinet plan: left frame segment 2 50 Left short segment of the top horizontal width chain.
Cabinet plan: upper remaining width 33-1/4 844 Long upper horizontal span from the inside left reference to the outside right reference.
Cabinet plan: longer left depth segment 20-1/4 512 Upper long segment of the left vertical chain.
Cabinet plan: shorter left depth segment 1-1/2 38 Lower short segment of the left vertical chain.
Cabinet plan: outside depth 21-3/4 550 Full right-side vertical span across the plan.
Cabinet plan: narrow left box width 9-3/4 250 Upper horizontal span across the narrow left box references.
Cabinet plan: narrow left box depth 15-1/4 390 Vertical span through the narrow left box between its shown end references.
Cabinet plan: broad right bay span 20-1/2 519 Horizontal span across the broad right bay between its shown internal references.
Cabinet plan: lower left partial span 10-3/4 275 Lower horizontal span from the inside left reference to the right boundary of the narrow left bay.
Cabinet plan: outside width 35-1/4 894 Full horizontal outside span below the plan.
Front: countertop width 36 914 Full horizontal span above the slab in the front elevation.
Front: countertop height 2 50 Highest short right vertical span across the slab thickness.
Front: cabinet height 33-1/2 850 Long right vertical span from below the slab to the lower leg reference.
Front: upper rail reference 1-1/4 30 Upper short segment of the left vertical chain below the slab.
Front: main front region height 24-1/2 620 Long middle segment of the left vertical chain across the main door and drawer-front region.
Front: lower rail reference 2 50 Short left vertical segment immediately below the main front region.
Front: lower leg reference 6 150 Bottom left vertical segment below the lower rail.
Front: bottom left frame span 2 50 Left short segment of the bottom horizontal chain.
Front: bottom inner span 31-1/4 794 Middle segment of the bottom horizontal chain between the inner side references.
Front: bottom right frame span 2 50 Right short segment of the bottom horizontal chain.
Side exterior: countertop depth 22 560 Full horizontal span above the slab in the side elevation.
Side exterior: countertop height 2 50 Upper short right vertical span across the slab thickness.
Side exterior: cabinet height 33-1/2 850 Long right vertical span from below the slab to the lower leg reference.
Side exterior: upper rail reference 2 50 Upper short left vertical segment below the slab.
Side exterior: inner side-panel height 23-1/2 600 Long middle segment of the left vertical chain between the upper and lower frame references.
Side exterior: lower rail reference 2 50 Short left vertical segment below the side-panel region.
Side exterior: lower leg reference 6 150 Bottom left vertical segment below the lower rail.
Side exterior: bottom left frame span 2 50 Left short segment of the bottom depth chain.
Side exterior: bottom inner span 17-3/4 450 Middle segment of the bottom depth chain between the inside frame references.
Side exterior: bottom right frame span 2 50 Right short segment of the bottom depth chain.
Rear: countertop width 36 914 Full horizontal span above the slab in the rear elevation.
Rear: countertop height 2 50 Upper short right vertical span across the slab thickness.
Rear: cabinet height 33-1/2 850 Long right vertical span from below the slab to the lower leg reference.
Rear: upper panel segment 6 150 Upper segment of the left vertical chain from below the slab to the lower edge of the upper rear panel.
Rear: middle open-reference height 17-3/4 450 Long middle segment of the left chain between upper panel and lower rail references.
Rear: lower rear rail height 4 100 Short left vertical segment across the lower rear rail.
Rear: lower leg reference 6 150 Bottom left vertical segment from below the rear rail to the lower leg reference.
Rear: bottom left frame span 2 50 Left short segment of the bottom horizontal chain.
Rear: bottom inner span 31-1/4 794 Middle segment of the bottom horizontal chain between the inside side references.
Rear: bottom right frame span 2 50 Right short segment of the bottom horizontal chain.
Rear: left internal horizontal span 10-1/4 260 Left partial span in the middle open area, between the left inner frame and the shown upright reference.
Rear: right internal horizontal span 21-1/2 549 Right partial span in the middle open area, from the shown upright reference to the right inner frame.
Side internal view: countertop depth 22 560 Full horizontal span above the slab in the lower side view.
Side internal view: countertop height 2 50 Upper short right vertical span across the slab thickness.
Side internal view: cabinet height 33-1/2 850 Long right vertical span from below the slab to the lower leg reference.
Side internal view: upper rail reference 2 50 Upper short left vertical segment below the slab.
Side internal view: inner height reference 23-1/2 600 Long middle segment of the left vertical chain between upper and lower frame references.
Side internal view: lower rail reference 2 50 Short left vertical segment below the inner region.
Side internal view: lower leg reference 6 150 Bottom left vertical segment below the lower rail.
Side internal view: upper dashed box height 3-1/2 90 Short internal vertical span across the highest dashed box outline.
Side internal view: middle dashed box height 5-1/2 140 Internal vertical span across the middle dashed box outline.
Side internal view: lower dashed box height 5-1/2 140 Internal vertical span across the lowest dashed box outline.
Side internal view: dashed box depth 15-1/4 390 Horizontal span across the internal dashed box region.
Side internal view: bottom left frame span 2 50 Left short segment of the bottom depth chain.
Side internal view: bottom inner span 17-3/4 450 Middle segment of the bottom depth chain between its inner references.
Side internal view: bottom right frame span 2 50 Right short segment of the bottom depth chain.

Source note: No source tolerance or controlling unit is printed on this sheet.

Source note: The rear split values are reproduced from this particular source: 260 and 549.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.