Wishlist

Sonoma 36 left offset vanity - drawing text version

Sonoma 36 left offset vanity - source drawing text version

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of the ten source pages. All printed values, separate cabinet views and alternative countertop styles remain distinct. No engineering measurements are inferred or approved.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

The source does not establish current approval, purchased accessories or a controlling measurement unit. Inches and millimeters are copied separately.

The cabinet top view prints 21-5/8 in/550 mm; the side view prints 21-3/4 in/550 mm. Both labels are preserved without reconciliation.

The Double Cove title 1.5 IN and detailed edge 1-5/8 in/40 mm are kept separately; no nominal-versus-actual ruling is made.

Source page 1: Sonoma 36 left offset cabinet overview

View original PDF — Source page 1: Sonoma 36 left offset cabinet overview

Original drawing: Sonoma 36 left offset cabinet overview.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective drawing of an open-top cabinet on four legs. Broad paired fluted doors and a wide upper front are on the left; three narrower fluted fronts are on the right. An internal divider, compartmented upper drawer and rear rectangular opening are visible. No countertop or separate dimension callouts appear on this overview.

The title identifies SONOMA 36 IN SINGLE LEFT OFFSET SINK BATHROOM VANITY. Footer branding: Willow Bath and Vanity; willowbathandvanity.com; info@willowbathandvanity.com; 1-877-788-8444.

No dimension callouts are printed on this overview page.

Back to contents

Source page 2: Cabinet front view

View original PDF — Source page 2: Cabinet front view

Original drawing: Cabinet front view.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Front elevation shows a broad paired-door bay on the left and a narrow three-front column on the right, separated by a vertical stile. The three right fronts have distinct vertical measurements; do not apply the upper-front height to the broad door height.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall cabinet width 35-1/4 894 Full outside left-to-right span across the front elevation.
Overall cabinet height 33-1/2 850 Top cabinet reference to lower foot reference, without a countertop shown.
Wide left front width 20 512 Horizontal width between the side boundaries of the broad upper front.
Narrow right front width 9-7/8 252 Horizontal width between the side boundaries of the narrow upper front.
Paired door region height 18-3/8 466 Vertical span from the upper edge of the paired doors to their lower edge.
Foot / bottom rail clearance 3-7/8 98 Vertical distance from lower foot reference to underside of bottom rail.
Right upper front height 6-1/8 156 Vertical span of the upper narrow drawer front.
Right middle front height 6-1/8 156 Vertical span of the second narrow drawer front.
Right lower front height 11 280 Vertical span of the tall lower front in the narrow column.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source page 3: Cabinet top view

View original PDF — Source page 3: Cabinet top view

Original drawing: Cabinet top view.

Original source page 3, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The outer plan shows frame rails, corner reinforcement and an internal divider. The drawer box occupies the right narrow bay. The two upper width labels dimension separate inner bays; there is no single overall width callout on this page.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 3 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Left inner bay width 20-3/4 527 Upper left horizontal span from the inner left frame reference to the divider at the wide bay.
Right inner bay width 9-7/8 252 Upper right horizontal span from the divider reference to the inner right frame reference.
Overall cabinet depth 21-5/8 550 Outside front-to-back span of the plan.
Right drawer internal depth 16 410 Front-to-back span of the narrow inner drawer box at the right.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source page 4: Cabinet back view

View original PDF — Source page 4: Cabinet back view

Original drawing: Cabinet back view.

Original source page 4, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

A rectangular rear panel overlaps the rear frame. It contains one rounded rectangular opening toward the right and a smaller circular feature toward the left. Upper horizontal and right vertical chains locate the rectangular opening. Lower horizontal and left vertical dimensions locate the center of the circular feature; its diameter is not labeled.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 4 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall rear width 35-1/4 894 Outside left-to-right width above the rear elevation.
Left outside edge to rectangular opening 19-1/4 490 Upper chain from the left outside edge to the rectangular opening left edge, as viewed from behind.
Rectangular opening width 8-5/8 220 Upper chain across the rectangular rear opening.
Rectangular opening to right outside edge 7-1/4 184 Upper chain from the opening right edge to the outer right reference.
Top reference to rectangular opening 7-3/8 188 Upper right vertical segment from the cabinet top reference to the opening top.
Rectangular opening height 10-5/8 270 Right vertical chain across the rectangular opening height.
Opening bottom to rear-panel bottom 5-5/8 144 Right vertical span below the opening to the bottom of the rectangular rear panel.
Rear-panel bottom to lower foot reference 9-3/4 248 Lower right vertical segment from the rear panel bottom to the lower foot reference.
Circular-feature center above lower reference 13-3/4 348 Left vertical dimension from the lower foot reference to the centerline of the circular rear feature.
Left outside edge to circular-feature center 6-7/8 176 Bottom horizontal span from the left outer reference to the circular-feature centerline.
Circular-feature center to right outside edge 28-1/4 718 Bottom horizontal span from the circular-feature centerline to the right outside reference.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source page 5: Cabinet side view

View original PDF — Source page 5: Cabinet side view

Original drawing: Cabinet side view.

Original source page 5, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Side elevation shows the exterior frame, fluted front projections and three dashed internal drawer sections. The lower region has two separately drawn height references. Their endpoints differ, so they are not combined or treated as contradictory sizes.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 5 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall cabinet depth 21-3/4 550 Upper outside front-to-back span in the side elevation. The top-view page separately prints 21-5/8 with 550 mm.
Upper drawer-box height 3-3/4 96 Short vertical span across the top dashed drawer-box section.
Middle drawer-box height 3-3/4 96 Short vertical span across the next dashed drawer-box section.
Lower drawer-section outer reference height 9-3/8 240 Longer vertical reference at the left of the lower drawer section, spanning the upper/lower reference lines shown.
Lower drawer-section inner reference height 8-3/4 220 Separate vertical reference at the right of the lower drawer section, between the indicated inset lines.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source page 6: 36 IN left offset 2 IN Straight Mitered Edge countertop overview

View original PDF — Source page 6: 36 IN left offset 2 IN Straight Mitered Edge countertop overview

Original drawing: 36 IN left offset 2 IN Straight Mitered Edge countertop overview.

Original source page 6, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective of a rectangular countertop with a straight deep front edge, one sink opening offset to the left, one faucet hole behind the opening and a full rear backsplash. The title identifies 2 IN Straight Mitered Edge; no dimension-line callouts occur on this page.

No dimension callouts are printed on this overview page.

Back to contents

Source page 7: Straight Mitered Edge countertop dimensions

View original PDF — Source page 7: Straight Mitered Edge countertop dimensions

Original drawing: Straight Mitered Edge countertop dimensions.

Original source page 7, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Separate backsplash elevation and side profile are followed by a horizontal edge elevation and a top plan with one left-offset opening. One faucet hole lies behind the opening; four small bracket holes sit outside it. A separate narrow edge section is at the right. Horizontal chains separately locate the opening and bracket columns; vertical chains separately locate the opening and bracket rows.

Two leaders state 45 Degree Mitered Edge, at the edge elevation and lower right plan corner. SINK BRACKET points to a small mounting-hole symbol. The source says these dimensions apply exclusively to Straight Mitered Edge countertops and refers other styles to Double Cove Edge dimensions.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 7 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 36 914 Full horizontal span of the separate backsplash elevation.
Backsplash height 3-7/8 100 Vertical height of the backsplash elevation.
Backsplash side thickness 3/4 20 Thickness of the narrow side profile at upper right.
Mitered edge overall height 2 50 Vertical height of the horizontal edge elevation.
Mitered edge left return 3/4 20 Short horizontal span at the left end of the edge elevation.
Mitered edge right return 3/4 20 Short horizontal span at the right end of the edge elevation.
Top plan: outside width 36 914 Full horizontal span of the countertop outline.
Top plan: left edge to faucet axis 12 304 Left upper segment from outer left edge to faucet and sink axis.
Top plan: faucet axis to right edge 24 610 Right upper segment from faucet and sink axis to outer right edge.
Top plan: outside depth 22 560 Full vertical front-to-back span of the countertop plan.
Top plan: rear edge to opening 5-1/2 140 Upper left chain from rear outside edge to rear side of the sink opening.
Top plan: opening depth 12-1/4 310 Middle left chain across the sink opening front-to-back.
Top plan: opening to front edge 4-3/8 110 Lower left chain from opening front edge to outside front edge.
Top plan: rear edge to faucet center 2-3/4 70 Short vertical dimension from rear outside edge to faucet-hole center.
Top plan: faucet-hole diameter 1-3/8 35 Diameter callout at the single round faucet hole.
Top plan: rear edge to bracket row 6-3/4 170 Upper internal vertical span from rear edge to rear bracket-hole row.
Top plan: bracket row spacing 9-7/8 250 Vertical spacing between the rear and front bracket-hole rows.
Top plan: bracket row to front edge 5-1/2 140 Lower internal vertical span from front bracket-hole row to outside front edge.
Top plan: left edge to opening 3-1/4 84 Left segment of the horizontal opening chain.
Top plan: opening width 17-3/8 440 Middle horizontal span across the sink opening.
Top plan: opening to right edge 15-3/8 390 Right segment from opening right edge to outside right edge.
Top plan: left edge to bracket column 1-1/8 27 Left segment of the lowest chain to the left bracket-column reference.
Top plan: bracket-column spacing 21-3/4 554 Lowest-chain middle span between left and right bracket columns.
Top plan: bracket column to right edge 13-1/8 333 Lowest-chain right span from right bracket column to outside right edge.
Separate edge section transverse span 2 50 Horizontal span above the narrow edge section to the right of the plan.
Separate edge section upper wall 3/4 20 Short upper vertical span on the separate edge section.
Separate edge section lower wall 3/4 20 Short lower vertical span on the separate edge section.
Sink opening corner label4-R10 Not printed separately Not printed separately The rounded opening-corner leader reads 4-R 10; no separate unit printed on this leader.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source page 8: Standard rectangular undermount sink

View original PDF — Source page 8: Standard rectangular undermount sink

Original drawing: Standard rectangular undermount sink.

Original source page 8, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The left view shows a rectangular sink with a hatched flange and sloped interior. A round and an oval feature are drawn within the bowl without separate size callouts. The right view is a side section of the curved bowl and flange. Five dimension references are preserved below.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 8 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Sink outside width 20-1/8 511 Horizontal width across the outer flange in plan view.
Sink outside depth 15 381 Vertical outside depth across the flange.
Sink opening width 17-3/4 451 Horizontal inner-opening width between the flange edges.
Sink opening depth 12-5/8 320.6 Front-to-back opening depth between the inner flange edges.
Sink sectional height 7-5/8 193.6 Vertical dimension beside the side section.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source page 9: 36 IN left offset 1.5 IN Double Cove Edge countertop overview

View original PDF — Source page 9: 36 IN left offset 1.5 IN Double Cove Edge countertop overview

Original drawing: 36 IN left offset 1.5 IN Double Cove Edge countertop overview.

Original source page 9, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective of a molded countertop with one opening offset to the left, a faucet hole behind it, a layered front and side edge and a molded rear backsplash. The title uses 1.5 IN Double Cove Edge; no dimension-line callouts occur on this overview.

No dimension callouts are printed on this overview page.

Back to contents

Source page 10: Double Cove Edge countertop dimensions

View original PDF — Source page 10: Double Cove Edge countertop dimensions

Original drawing: Double Cove Edge countertop dimensions.

Original source page 10, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The upper drawings show a molded backsplash in elevation and side profile, followed by a layered edge elevation. Below is a plan with one left-offset sink opening, faucet hole, four bracket holes and a separate narrow edge section. The opening front-edge setback is 4-3/8 in/110 mm, distinct from the rear bracket setback 6-3/4 in/170 mm.

The source says these dimensions apply exclusively to Double Cove Edge countertops. The style title says 1.5 IN, while the detailed edge height is 1-5/8 in/40 mm. These remain separately printed values; no nominal/actual conclusion or correction is inferred.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 10 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 33-7/8 860 Full horizontal span across the molded backsplash elevation.
Backsplash height 3-7/8 100 Vertical height of the backsplash elevation.
Backsplash side thickness 3/4 20 Thickness of the narrow backsplash side profile.
Cove edge overall height 1-5/8 40 Full vertical height of the cove-edge elevation; title separately says 1.5 IN.
Cove edge upper segment 3/4 20 Upper short vertical segment at right of edge elevation.
Cove edge lower segment 3/4 20 Lower short vertical segment at right of edge elevation.
Top plan: outside width 36 914 Full horizontal span of the countertop outline.
Top plan: left edge to faucet axis 12 304 Left upper segment from outer left edge to faucet and sink axis.
Top plan: faucet axis to right edge 24 610 Right upper segment from faucet and sink axis to outer right edge.
Top plan: outside depth 22 560 Full vertical front-to-back span of the countertop plan.
Top plan: rear edge to opening 5-1/2 140 Upper left chain from rear outside edge to rear side of the sink opening.
Top plan: opening depth 12-1/4 310 Middle left chain across the sink opening front-to-back.
Top plan: opening to front edge 4-3/8 110 Lower left chain from opening front edge to outside front edge.
Top plan: rear edge to faucet center 2-3/4 70 Short vertical dimension from rear outside edge to faucet-hole center.
Top plan: faucet-hole diameter 1-3/8 35 Diameter callout at the single round faucet hole.
Top plan: rear edge to bracket row 6-3/4 170 Upper internal vertical span from rear edge to rear bracket-hole row.
Top plan: bracket row spacing 9-7/8 250 Vertical spacing between the rear and front bracket-hole rows.
Top plan: bracket row to front edge 5-1/2 140 Lower internal vertical span from front bracket-hole row to outside front edge.
Top plan: left edge to opening 3-1/4 84 Left segment of the horizontal opening chain.
Top plan: opening width 17-3/8 440 Middle horizontal span across the sink opening.
Top plan: opening to right edge 15-3/8 390 Right segment from opening right edge to outside right edge.
Top plan: left edge to bracket column 1-1/8 27 Left segment of the lowest chain to the left bracket-column reference.
Top plan: bracket-column spacing 21-3/4 554 Lowest-chain middle span between left and right bracket columns.
Top plan: bracket column to right edge 13-1/8 333 Lowest-chain right span from right bracket column to outside right edge.
Top plan rear inset 1 25 Short vertical span from rear edge to rear dashed inset reference.
Top plan right inset band 2 50 Short horizontal span across the inset band on the right of the plan.
Top plan front inset band 2 50 Short vertical span across the front inset band.
Separate edge section transverse span 1-5/8 40 Horizontal span above the separate narrow edge section.
Sink opening corner label4-R20 Not printed separately Not printed separately The rounded opening-corner leader reads 4-R 20; no separate unit printed on this leader.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values are copied as printed, not converted or approved for installation.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.