Wishlist

Sonoma 36 right offset vanity - drawing text version

Sonoma 36 right offset vanity - source drawing text version

PDF with text descriptions — 23 pages

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source notes and limitations in mind when using this text version.

Text version of the source drawing

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of all ten source pages. Each printed label and reference span is retained independently; no missing dimension is calculated or approved.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

The plan labels cabinet depth 21-5/8 in /550 mm, while the side view labels 21-3/4 in /550 mm. Both printed labels remain distinct; no controlling value is selected.

The Double Cove title says 1.5 IN while the detailed edge height is 1-5/8 in /40 mm. Both remain as printed, without a nominal-versus-actual ruling.

The source does not establish current engineering approval, controlling units, included accessories or which countertop style applies to a purchased configuration.

Source page 1: Cabinet perspective overview

View original PDF — Source page 1: Cabinet perspective overview

Original drawing: Cabinet perspective overview.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

An open-top cabinet stands on four corner posts/legs. The front has three narrow stacked fronts on the left and a broad upper front above two tall doors on the right. The faces have fine vertical detailing. The open interior shows a narrow drawer box at left, a larger right bay and a rectangular rear-panel opening. No countertop or separate dimension callouts appear on this overview.

No dimension callouts are printed on this overview page.

Back to contents

Source page 2: Cabinet front elevation

View original PDF — Source page 2: Cabinet front elevation

Original drawing: Cabinet front elevation.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The front elevation shows the narrow left stack and the broad right door bay inside the outer frame, with small foot references below the posts. Dimensions separately identify the overall width and height, the two front widths, three left-front heights, the right door height, and a lower leg/base reference. These spans are not substituted for internal storage dimensions.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall width 35-1/4 894 Outside horizontal span above the front elevation.
Left front width 9-7/8 252 Horizontal span across the narrow left front, inside the frame.
Right front width 20 512 Horizontal span across the broad right front, inside the frame.
Overall height 33-1/2 850 Vertical outside span at the right, from the top to the bottom reference.
Right door height 18-3/8 466 Vertical span from the top of the right door pair to its bottom edge.
Upper left front height 6-1/8 156 Upper of the two short vertical front-height spans on the left.
Middle left front height 6-1/8 156 Second short vertical front-height span on the left.
Lower left front height 11 280 Vertical span of the taller lower front in the narrow left column.
Lower leg/base reference 3-7/8 98 Lower left vertical span from the underside of the lower horizontal frame reference to the bottom reference.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 3: Cabinet top plan

View original PDF — Source page 3: Cabinet top plan

Original drawing: Cabinet top plan.

Original source page 3, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The rectangular frame surrounds a narrow drawer box at left and a broad open bay at right. Dashed lines mark other frame/internal references. Four labels identify the two bay widths, outside depth and the drawer inner front-to-back span. No overall width or dimensions for other internal features are supplied on this page.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 3 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Left drawer/bay width 9-7/8 252 Upper left horizontal span between the inside frame and divider references.
Right open-bay width 20-3/4 527 Upper right horizontal span from the divider reference to the inside right reference.
Outside depth 21-5/8 550 Outside vertical span at the right of the plan.
Drawer inner depth 16 410 Vertical span inside the narrow left drawer box, between its inside rear and front edges.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 4: Cabinet rear elevation

View original PDF — Source page 4: Cabinet rear elevation

Original drawing: Cabinet rear elevation.

Original source page 4, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

A broad rear panel contains a rounded rectangular opening left of center and a round opening near its lower-right area. The rear view reverses the apparent left/right arrangement relative to the front. Upper and left chains locate the rectangular opening. Lower and right chains locate the round opening center; its diameter is not separately labeled.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 4 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall width 35-1/4 894 Full width above the rear elevation.
Left outside to rectangular opening 7-1/4 184 Upper left horizontal segment from the outside left reference to the opening left edge.
Rectangular opening width 8-5/8 220 Upper middle horizontal span across the rectangular opening.
Rectangular opening to right outside 19-1/4 490 Upper right horizontal segment from the opening right edge to the outside right reference.
Top to opening top 7-3/8 188 Upper left vertical segment from the cabinet top reference to the opening top edge.
Rectangular opening height 10-5/8 270 Left vertical span across the rectangular opening.
Opening bottom to panel bottom 5-5/8 144 Left vertical segment between the rectangular opening bottom and the rear panel bottom.
Panel bottom to base reference 9-3/4 248 Lowest left vertical segment from the rear panel bottom to the cabinet bottom reference.
Round-opening center height 13-3/4 348 Right vertical span from the bottom reference to the round opening center.
Left outside to round-opening center 28-1/4 718 Lower horizontal span from the outside left reference to the round opening centerline.
Round-opening center to right outside 6-7/8 176 Lower right horizontal span from the round opening centerline to the outside right reference.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 5: Cabinet side elevation

View original PDF — Source page 5: Cabinet side elevation

Original drawing: Cabinet side elevation.

Original source page 5, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The cabinet side is shown with front faces at the right and dashed outlines of three drawer boxes. Separate callouts identify the outside depth, upper and middle drawer heights, a lower drawer overall height and a lower vertical reference. The drawer outlines do not establish dimensions for every unlabelled part.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 5 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Outside depth 21-3/4 550 Horizontal outside span above the side elevation; retained separately from the top-view inch label.
Upper drawer height 3-3/4 96 Short vertical span beside the upper dashed drawer box.
Middle drawer height 3-3/4 96 Short vertical span beside the middle dashed drawer box.
Lower drawer overall height 9-3/8 240 Left vertical span across the lower dashed drawer reference.
Lower vertical reference, right 8-3/4 220 Right vertical span between the shown upper dashed and lower horizontal reference lines.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 6: Straight Mitered Edge countertop overview

View original PDF — Source page 6: Straight Mitered Edge countertop overview

Original drawing: Straight Mitered Edge countertop overview.

Original source page 6, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective drawing of a rectangular countertop with an upright rear backsplash, a single rounded rectangular opening toward the right and a round faucet hole behind it. Front and side edges have a straight mitered profile. The title identifies a 36 IN SINGLE RIGHT OFFSET SINK 2 IN STRAIGHT MITERED EDGE COUNTERTOP. There are no separate dimension callouts on this overview.

No dimension callouts are printed on this overview page.

Back to contents

Source page 7: Straight Mitered Edge countertop dimensions

View original PDF — Source page 7: Straight Mitered Edge countertop dimensions

Original drawing: Straight Mitered Edge countertop dimensions.

Original source page 7, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

A separate backsplash front elevation and side profile appear at the top, with a straight edge elevation below. The lower plan shows a right-offset opening, faucet hole and four bracket-hole symbols, beside a separate edge section. Two leaders identify 45 Degree Mitered Edge; the SINK BRACKET leader points to a bracket-hole symbol. Opening and bracket references have separate width/depth chains.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 7 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 36 914 Horizontal span above the separate backsplash elevation.
Backsplash height 3-7/8 100 Vertical span of the separate backsplash elevation.
Backsplash thickness 3/4 20 Horizontal span above the narrow backsplash side profile.
Mitered edge overall height 2 50 Vertical overall height of the separate straight edge elevation.
Mitered edge left wall 3/4 20 Short horizontal wall span at the left end of the straight edge elevation.
Mitered edge right wall 3/4 20 Short horizontal wall span at the right end of the straight edge elevation.
Countertop outside width 36 914 Full horizontal outside span above the plan.
Left edge to faucet axis 24 610 Upper left split span from the outside left edge to the faucet-hole centerline.
Faucet axis to right edge 12 304 Upper right split span from the faucet-hole centerline to the outside right edge.
Countertop outside depth 22 560 Full vertical outside span at the left of the plan.
Rear edge to opening 5-1/2 140 Upper left vertical segment from the rear outside edge to the opening rear edge.
Opening depth 12-1/4 310 Middle left vertical span across the opening.
Opening to front edge 4-3/8 110 Lower left vertical segment from the opening front edge to the front outside edge.
Rear edge to faucet-hole center 2-3/4 70 Short vertical span beside the round faucet hole, from rear outside edge to hole center.
Faucet-hole diameter 1-3/8 35 Diameter-symbol leader at the round faucet hole.
Rear edge to rear bracket row 6-3/4 170 Internal vertical segment from the rear outside edge to the rear bracket-hole row.
Bracket row spacing 9-7/8 250 Vertical separation of rear and front bracket-hole rows.
Front bracket row to front edge 5-1/2 140 Lower internal vertical segment from the front bracket row to the front outside edge.
Left edge to opening 15-3/8 390 Left segment of the opening-width chain below the plan.
Opening width 17-3/8 440 Middle horizontal span across the opening.
Opening to right edge 3-1/4 84 Right segment from the opening right edge to the outside right edge.
Left edge to left bracket column 13-1/8 333 Left segment of the lowest horizontal chain, to the left bracket-column reference.
Bracket-column spacing 21-3/4 554 Middle span of the lowest chain, between bracket-column references.
Right bracket column to right edge 1-1/8 27 Right segment of the lowest chain, to the outside right edge.
Separate edge-section width 2 50 Horizontal span above the narrow separate edge section at right.
Separate edge-section upper wall 3/4 20 Short vertical span at the upper end of the separate edge section.
Separate edge-section lower wall 3/4 20 Short vertical span at the lower end of the separate edge section.
Opening corner label 4-R10 Not printed separately Not printed separately The leader marks four opening corners 4-R10; no separate unit is printed on this label.

Source note: The source limits these dimensions to Straight Mitered Edge countertops; Double Cove Edge dimensions are in the separate section.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 8: Standard rectangular undermount sink

View original PDF — Source page 8: Standard rectangular undermount sink

Original drawing: Standard rectangular undermount sink.

Original source page 8, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

A plan view has a hatched outer flange, sloping inner bowl, and round and oval interior features that are not separately labelled. The right cut section shows a curved bowl with its flange at the bottom and a raised neck at the top. Five dimensions identify outer spans, inner opening spans and the section height; no feature diameter is supplied.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 8 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Outside sink width 20-1/8 511 Full horizontal outside span above the plan view.
Outside sink depth 15 381 Full vertical outside span to the right of the plan view.
Inner sink opening width 17-3/4 451 Horizontal inner-opening span below the plan.
Inner sink opening depth 12-5/8 320.6 Vertical inner-opening span to the left of the plan.
Section height 7-5/8 193.6 Vertical span beside the cut section from the flange reference to the raised neck top.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source page 9: Double Cove Edge countertop overview

View original PDF — Source page 9: Double Cove Edge countertop overview

Original drawing: Double Cove Edge countertop overview.

Original source page 9, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective drawing of a countertop with a right-offset rounded rectangular opening, a faucet hole behind it and a shaped upright rear backsplash. The front and side edges have a stepped molded profile. The title identifies a 36 IN SINGLE RIGHT OFFSET SINK 1.5 IN DOUBLE COVE EDGE COUNTERTOP. No separate dimension callouts appear on this overview.

No dimension callouts are printed on this overview page.

Back to contents

Source page 10: Double Cove Edge countertop dimensions

View original PDF — Source page 10: Double Cove Edge countertop dimensions

Original drawing: Double Cove Edge countertop dimensions.

Original source page 10, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

A molded backsplash front elevation and narrow side profile appear at the top, with a cove-edge elevation below. The lower plan shows a right-offset opening, faucet hole, four bracket-hole symbols and inset bands, beside a separate edge section. Opening and bracket-hole setbacks are separately dimensioned. The detailed edge is 1-5/8 in /40 mm, while the title says 1.5 IN; no nominal-versus-actual interpretation is supplied.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 10 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 33-7/8 860 Horizontal span above the separate backsplash elevation.
Backsplash height 3-7/8 100 Vertical span of the separate backsplash elevation.
Backsplash thickness 3/4 20 Horizontal span above the narrow backsplash side profile.
Cove edge overall height 1-5/8 40 Overall vertical height beside the separate cove-edge elevation.
Cove edge upper segment 3/4 20 Upper of the two short vertical segments at the right of the cove-edge elevation.
Cove edge lower segment 3/4 20 Lower short vertical segment at the right of the cove-edge elevation.
Countertop outside width 36 914 Full horizontal outside span above the plan.
Left edge to faucet axis 24 610 Upper left split span from the outside left edge to the faucet-hole centerline.
Faucet axis to right edge 12 304 Upper right split span from the faucet-hole centerline to the outside right edge.
Countertop outside depth 22 560 Full vertical outside span at the left of the plan.
Rear edge to opening 5-1/2 140 Upper left vertical segment from the rear outside edge to the opening rear edge.
Opening depth 12-1/4 310 Middle left vertical span across the opening.
Opening to front edge 4-3/8 110 Lower left vertical segment from the opening front edge to the front outside edge.
Rear edge to faucet-hole center 2-3/4 70 Short vertical span beside the round faucet hole, from rear outside edge to hole center.
Faucet-hole diameter 1-3/8 35 Diameter-symbol leader at the round faucet hole.
Rear edge to rear bracket row 6-3/4 170 Internal vertical segment from the rear outside edge to the rear bracket-hole row.
Bracket row spacing 9-7/8 250 Vertical separation of rear and front bracket-hole rows.
Front bracket row to front edge 5-1/2 140 Lower internal vertical segment from the front bracket row to the front outside edge.
Left edge to opening 15-3/8 390 Left segment of the opening-width chain below the plan.
Opening width 17-3/8 440 Middle horizontal span across the opening.
Opening to right edge 3-1/4 84 Right segment from the opening right edge to the outside right edge.
Left edge to left bracket column 13-1/8 333 Left segment of the lowest horizontal chain, to the left bracket-column reference.
Bracket-column spacing 21-3/4 554 Middle span of the lowest chain, between bracket-column references.
Right bracket column to right edge 1-1/8 27 Right segment of the lowest chain, to the outside right edge.
Rear inset reference 1 25 Short vertical span from the rear outside edge to the dashed inset line.
Left inset band 2 50 Short horizontal span across the left inset band.
Front inset band 2 50 Short vertical span across the front inset band.
Separate edge-section width 1-5/8 40 Horizontal span above the narrow separate edge section at right.
Opening corner label 4-R20 Not printed separately Not printed separately The leader marks four opening corners 4-R20; no separate unit is printed on this label.

Source note: The source limits these dimensions to Double Cove Edge countertops; Straight Mitered Edge dimensions are in the separate section.

Source note: The source states: All measurements are plus or minus 1/4 inch. This note is retained without recalculating or approving a dimension.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.