Wishlist

Sonoma Teak 72 double sink vanity - drawing text version

Sonoma Teak 72 double sink vanity - source drawing text version

This is a text version of the source drawings. Original drawing images are available through the PDF page links below. Keep the source warnings and unresolved dimensions in mind when using this text version.

Drawing text — flagged details need confirmation

All printed dimension labels are preserved without engineering approval. Obtain confirmed dimensions from Willow Bath and Vanity before installation, fabrication, or drilling.

Text equivalent of all ten source pages. Original labels, reference points and alternative countertop styles remain distinct. No dimensions are corrected or approved.

Each source page has its original drawing, a description of the view, and a table identifying what each dimension measures. Inches and millimeters are copied independently from the source; no conversion replaces a printed value.

Source limitations

Inches and millimeters remain separately printed source values. The source does not establish the controlling unit, current approval or included accessories.

Rear-opening dimensions are printed only around the left opening; the matching appearance of the right opening is not used to invent measurements.

The Double Cove title 1.5 IN and the detailed edge 1-5/8 in /40 mm remain separate labels without a nominal-versus-actual ruling.

SON72-P10-REAR - source page 10

Unusual printed rear inset fraction: 1/1 in / 25 mm.

The original rear inset label is printed 1/1 inch alongside25mm. The unusual source fraction is retained, not normalized.

Willow Bath and Vanity must confirm the intended inch label and reference before use. No correction has been made.

Source page 1: Sonoma Teak 72 cabinet overview

View original PDF — Source page 1: Sonoma Teak 72 cabinet overview

Original drawing: Sonoma Teak 72 cabinet overview.

Original source page 1, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective drawing of an open-top cabinet on legs with two broad paired-door bays, broad upper fronts and a narrow central three-drawer column. Fluted front panels are shown. The interior has a central drawer box, two open broad bays and two rear rectangular openings. No countertop or separate dimension callouts appear here.

Title: SONOMA TEAK 72 IN DOUBLE SINK BATHROOM VANITY. Footer: willowbathandvanity.com; info@willowbathandvanity.com; 1-877-788-8444.

No dimension callouts are printed on this overview page.

Back to contents

Source page 2: Cabinet front view

View original PDF — Source page 2: Cabinet front view

Original drawing: Cabinet front view.

Original source page 2, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Two broad paired-door bays flank a narrow central column of three drawer fronts. Outer legs and intermediate lower supports are visible. The upper width chain identifies three front regions; separate small labels identify side projections.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 2 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Main cabinet width 71 1804 Upper horizontal outside frame span, excluding separately labeled side projections.
Left side projection 1/4 5 Upper left short horizontal span outside the frame.
Right side projection 1/4 5 Upper right short horizontal span outside the frame.
Left broad front width 26-3/4 680 Upper horizontal span across the left broad region.
Central narrow front width 11-1/8 284 Upper horizontal span across the central narrow region.
Right broad front width 26-3/4 680 Upper horizontal span across the right broad region.
Overall cabinet height 34 865 Full vertical outside span at the left, down to the feet.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.

Back to contents

Source page 3: Cabinet top view

View original PDF — Source page 3: Cabinet top view

Original drawing: Cabinet top view.

Original source page 3, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Two broad inner bays each contain a U-shaped recess; a narrow drawer box lies in the center. An outside width and depth surround separate bay widths and a right-side depth chain.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 3 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Overall cabinet width 71 1804 Full upper horizontal outside span.
Left inner bay width 26-3/4 680 Upper left horizontal bay span.
Central inner bay width 11-1/8 284 Upper central horizontal bay span.
Right inner bay width 26-3/4 680 Upper right horizontal bay span.
Overall cabinet depth 21-1/2 545 Full outside vertical span at the left.
Rear rail depth 2 50 Upper right short vertical segment.
Inner depth span 17-1/2 445 Middle right vertical segment.
Front rail depth 2 50 Lower right short vertical segment.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.

Back to contents

Source page 4: Cabinet back view

View original PDF — Source page 4: Cabinet back view

Original drawing: Cabinet back view.

Original source page 4, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Three rear regions lie below a broad upper band. Rectangular openings appear in the left and right regions, but opening size and location labels are printed only around the left opening. The right opening is described visually without inferring its measurements.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 4 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Upper inner width 67-1/8 1704 Upper horizontal span between inner side-member references.
Left side member width 2 50 Upper left short horizontal span.
Right side member width 2 50 Upper right short horizontal span.
Overall cabinet height 34 865 Full outside vertical span at the left.
Left rear region width 25 635 Upper horizontal span across the left rear region.
Central rear region width 10-3/4 274 Upper horizontal span across the central rear region.
Right rear region width 25 635 Upper horizontal span across the right rear region.
Upper rear band height 5-1/2 140 Upper right vertical span from top to underside of rear band.
Lower rear region height 22-7/8 580 Lower right vertical span from underside of upper band to top of bottom rail.
Left rear-region edge to left opening 8 203 Horizontal offset from left region boundary to the left opening edge.
Left rear opening width 7-7/8 200 Horizontal span above the left rectangular opening.
Upper band to left opening top 5-3/8 138 Vertical offset from underside of upper band to top of left opening.
Left rear opening height 7-7/8 200 Vertical span at right of the left opening.
Overall rear width 71 1804 Bottom horizontal span between outside frame references.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.

Back to contents

Source page 5: Cabinet side view

View original PDF — Source page 5: Cabinet side view

Original drawing: Cabinet side view.

Original source page 5, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The side panel is enclosed by two vertical end members and upper/lower rails. Hardware projections appear at the left. The page separately labels the front projection, top depth chain, left height chain and full outside dimensions.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 5 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Front projection 1/4 5 Short upper left horizontal span beyond the main frame.
Left end member depth 2 50 Left segment of the upper horizontal chain.
Side panel depth 17-1/2 445 Middle segment of the upper horizontal chain.
Right end member depth 2 50 Right segment of the upper horizontal chain.
Upper rail height 2 50 Upper left vertical segment.
Side panel height 26-3/8 670 Middle left vertical segment.
Lower rail height 2 50 Short lower left vertical segment above feet.
Foot clearance 3-3/4 95 Lowest left vertical segment.
Overall cabinet height 34 865 Full outside vertical span at right.
Overall cabinet depth 21-1/2 545 Bottom horizontal outside span.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.

Back to contents

Source page 6: 72 inch Straight Mitered Edge countertop overview

View original PDF — Source page 6: 72 inch Straight Mitered Edge countertop overview

Original drawing: 72 inch Straight Mitered Edge countertop overview.

Original source page 6, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Perspective drawing of a long countertop with two sink openings, two faucet holes, a flat rear backsplash and straight front/side edges. Title: 72 IN DOUBLE SINK 2 IN STRAIGHT MITERED EDGE COUNTERTOP. No separate dimension labels appear on this overview.

No dimension callouts are printed on this overview page.

Back to contents

Source page 7: Straight Mitered Edge countertop dimensions

View original PDF — Source page 7: Straight Mitered Edge countertop dimensions

Original drawing: Straight Mitered Edge countertop dimensions.

Original source page 7, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Backsplash elevations and a straight edge elevation appear above the plan. The plan has two openings, two circular faucet holes and eight bracket holes; the printed opening-depth and faucet-hole labels are near the left opening. Horizontal chains separately locate faucet centers, bracket columns and openings. Two leaders state 45 Degree Mitered Edge and SINK BRACKET points to a mounting hole. The source note limits dimensions to this style and refers the other style to Double Cove Edge.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 7 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 72 1829 Full horizontal span of backsplash elevation.
Backsplash height 3-7/8 100 Vertical height at left of backsplash elevation.
Backsplash thickness 3/4 20 Thickness of separate backsplash side profile.
Mitered edge height 2 50 Full vertical height of straight edge elevation.
Left edge wall thickness 3/4 20 Short horizontal inset at left end of edge elevation.
Right edge wall thickness 3/4 20 Short horizontal inset at right end of edge elevation.
Plan outside width 72 1829 Full outside horizontal span of the countertop plan.
Left edge to left faucet center 15-3/4 400 Left segment of the upper faucet-center chain.
Faucet center spacing 40-1/2 1028 Middle horizontal span between left and right faucet centers.
Right faucet center to right edge 15-3/4 400 Right segment of the upper faucet-center chain.
Plan outside depth 22 560 Full outside vertical span on the left.
Rear edge to left opening 5-1/2 140 Upper segment of the left opening chain.
Left opening depth 12-1/4 310 Middle segment of the left opening chain.
Left opening to front edge 4-3/8 110 Lower segment of the left opening chain.
Rear edge to left faucet center 2-3/4 70 Short vertical offset above the left faucet hole.
Left faucet-hole callout 1-3/8 35 Leader attached to the circular left faucet hole.
Rear edge to rear bracket row 6-3/4 170 Upper segment of the internal vertical bracket chain.
Bracket row spacing 9-7/8 250 Middle segment between rear and front bracket rows.
Front bracket row to front edge 5-1/2 140 Lower segment of the internal bracket chain.
Left edge to left bracket column 4-7/8 123 Left segment of the upper bottom horizontal bracket chain.
Left opening bracket-column spacing 21-3/4 554 Span between the two bracket columns around the left opening.
Inner bracket-column separation 18-5/8 474 Middle span between the bracket columns nearest the center of the countertop.
Right opening bracket-column spacing 21-3/4 554 Span between the two bracket columns around the right opening.
Right bracket column to right edge 4-7/8 123 Right segment of the horizontal bracket chain.
Left edge to left opening 7 180 Left segment of the bottom opening chain.
Left opening width 17-3/8 440 Second segment of the bottom opening chain.
Opening-to-opening gap 23-1/8 588 Middle segment between the two opening edges.
Right opening width 17-3/8 440 Fourth segment of the bottom opening chain.
Right opening to right edge 7 180 Right segment of the bottom opening chain.
Separate edge section width 2 50 Horizontal span across the narrow right edge section.
Separate edge upper wall 3/4 20 Upper short vertical span on the separate edge section.
Separate edge lower wall 3/4 20 Lower short vertical span on the separate edge section.
Opening corner label 4-R10 Not printed separately Not printed separately Leader at lower left opening corner reads 4-R10 without separate units.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.

Back to contents

Source page 8: Standard rectangular undermount sink

View original PDF — Source page 8: Standard rectangular undermount sink

Original drawing: Standard rectangular undermount sink.

Original source page 8, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

The left drawing shows the bowl with a hatched rectangular flange, sloping walls and circular/oval features in the bowl without separate size labels. The right drawing is a curved bowl side section. Five printed dimensions apply to the illustrated sink; no quantity or compatibility conclusion is inferred.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 8 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Sink outside width 20-1/8 511 Full outside horizontal width above the flange.
Sink outside depth 15 381 Full outside vertical depth at right of the plan.
Sink inner opening width 17-3/4 451 Inner horizontal span below the plan.
Sink inner opening depth 12-5/8 320.6 Inner vertical span at left of the plan.
Sink section height 7-5/8 193.6 Vertical depth of the illustrated side section.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.

Back to contents

Source page 9: 72 in double sink 1.5 in double cove edge countertop: overview

View original PDF — Source page 9: 72 in double sink 1.5 in double cove edge countertop: overview

Original drawing: 72 in double sink 1.5 in double cove edge countertop: overview.

Original source page 9, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

An isometric line drawing shows two sink openings and a faucet hole behind each, a layered shaped front/side edge, and an upright backsplash along the rear. This page is an overview without dimension callouts. The dimensional drawing for this edge is page 10.

No dimension callouts are printed on this overview page.

Back to contents

Source page 10: Double Cove Edge countertop dimensions

View original PDF — Source page 10: Double Cove Edge countertop dimensions

Original drawing: Double Cove Edge countertop dimensions.

Original source page 10, visually unchanged. Read this page's text equivalent.

View and dimensional relationships

Molded backsplash elevations and a layered edge elevation appear above a two-opening plan. Separate chains locate faucet centers, openings and bracket columns. A narrow edge section is at right. The source note limits these dimensions to Double Cove Edge and refers the other style to Straight Mitered Edge.

The title says 1.5 IN while the detailed edge says 1-5/8 in /40 mm. The rear inset is printed with the unusual fraction 1/1, retained and flagged without interpreting or correcting it.

On a narrow screen, scroll the measurement table horizontally to read every column. With a keyboard, focus the table region and use the left and right arrow keys.

Page 10 dimensions, as printed
Measurement Inches Millimeters Reference points / meaning
Backsplash width 69-7/8 1775 Full horizontal span of molded backsplash elevation.
Backsplash height 3-7/8 100 Vertical height of molded backsplash elevation.
Backsplash thickness 3/4 20 Thickness of separate side profile.
Cove edge height 1-5/8 40 Full vertical span of layered edge elevation.
Cove edge upper segment 3/4 20 Upper short vertical segment at right end of edge elevation.
Cove edge lower segment 3/4 20 Lower short vertical segment at right end of edge elevation.
Plan outside width 72 1829 Full outside horizontal span of the countertop plan.
Left edge to left faucet center 15-3/4 400 Left segment of the upper faucet-center chain.
Faucet center spacing 40-1/2 1028 Middle horizontal span between left and right faucet centers.
Right faucet center to right edge 15-3/4 400 Right segment of the upper faucet-center chain.
Plan outside depth 22 560 Full outside vertical span on the left.
Rear edge to left opening 5-1/2 140 Upper segment of the left opening chain.
Left opening depth 12-1/4 310 Middle segment of the left opening chain.
Left opening to front edge 4-3/8 110 Lower segment of the left opening chain.
Rear edge to left faucet center 2-3/4 70 Short vertical offset above the left faucet hole.
Left faucet-hole callout 1-3/8 35 Leader attached to the circular left faucet hole.
Rear edge to rear bracket row 6-3/4 170 Upper segment of the internal vertical bracket chain.
Bracket row spacing 9-7/8 250 Middle segment between rear and front bracket rows.
Front bracket row to front edge 5-1/2 140 Lower segment of the internal bracket chain.
Left edge to left bracket column 4-7/8 123 Left segment of the upper bottom horizontal bracket chain.
Left opening bracket-column spacing 21-3/4 554 Span between the two bracket columns around the left opening.
Inner bracket-column separation 18-5/8 474 Middle span between the bracket columns nearest the center of the countertop.
Right opening bracket-column spacing 21-3/4 554 Span between the two bracket columns around the right opening.
Right bracket column to right edge 4-7/8 123 Right segment of the horizontal bracket chain.
Left edge to left opening 7 180 Left segment of the bottom opening chain.
Left opening width 17-3/8 440 Second segment of the bottom opening chain.
Opening-to-opening gap 23-1/8 588 Middle segment between the two opening edges.
Right opening width 17-3/8 440 Fourth segment of the bottom opening chain.
Right opening to right edge 7 180 Right segment of the bottom opening chain.
Rear inset band: unresolved fraction 1/1 25 Short vertical inset from rear edge to dashed rear reference; unusual printed fraction retained.Unresolved: SON72-P10-REAR
Right inset band 2 50 Short horizontal inset at right side of plan.
Front inset band 2 50 Short vertical inset at front right of plan.
Separate edge section width 1-5/8 40 Horizontal span above the separate narrow edge section.
Opening corner label 4-R20 Not printed separately Not printed separately Leader at lower left opening corner reads 4-R20 without separate units.

Source note: The source states: All measurements are plus or minus 1/4 inch. Values remain as printed, not converted or approved for installation.

Back to contents

Source and assistance

View the original source PDF. Source reviewed 19 November 2026.

Request an accessible format or a confirmed drawing, or call Willow Bath and Vanity at (877) 788-8444.

Updated 19 November 2026. This text version explains the source drawing; it is not a new installation specification.